ID: 86125 (AEG-LCT-LCK74MN)
Hover or touch above to zoom
All guns ship with federally mandated orange tip
MAP ProtectedExempt From Coupons
Free ShippingNo Coupon Required
- Ultra realistic stamped steel riveted receiver to simulate the look and feel of an actual AK rifle
- Heavy weight steel barrel, gas piston assembly, front sight, and muzzle
- Durable light weight fiber reinforced polymer furniture
- Side folding stock w/ sling attachment point
- AK/SVD style side rail for optic mounts
- Adjustable rear leaf sight
- Standard ver.3 gearbox w/ 9mm bearings (upgradeable w/ standard TM compatible parts)
- Easy access / easy to adjust slide style hopup
FPS Range: 400-420Length:
4040g Inner Barrel:
130rd Mid- Capacity. Works with LCT, G&P and other compatible AK Series Airsoft AEG MagazinesMuzzle Velocity:
400-420 FPS (Measured with 0.20g BBs)Thread Direction:
14mm Barrel threads / 28mm Flash hider NegativeGearbox:
Ver 3 Full Metal, Fully UpgradeableMotor:
Short TypeFire Modes:
9.6v Small Stick Type or 7.4v stick LiPo recommended (Battery not included. Wired to dust cover with small Tamiya connector)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, ManualManufacturer:
About LCT Airsoft
When it comes to Airsoft externals, LCT is one of the most prolific brands on the market. LCT prides themselves in making some of the most realistic replicas in Airsoft through great attention to detail and by closely replicating the same manufacturing processes used to make their real firearm counterparts.LCT shows the same level of commitment for their AEG internals as their externals; the LCT gearboxes feature an enhanced list of parts users would typically upgrade to. These high performance, reinforced internals boast greatly improved reliability while still remaining completely Tokyo Marui (TM) compatible.
(Write a review)
Comes with black flash hider
Folding stock does not wobble
Grip is solid
FPS was just below 400 with .25s. Didn't even go through one mag before chrono
This rifle just feels great
Magpul zhukov handuards fit great
PTS grip fits with some effort
Asura Dynamics buffer tube V2 fits perfect. No wobble
Rifle is covered in residue that will slightly stain your hands. Little bit sticky too
Magwell is super tight. Can be difficult to load mags at first
Orange tip is glued on
All in all. This is an amazing AK. If you're looking for a higher quality 74. Get this one
"Good, Solid steel, Comes with black metal flash hider.
"Looks good, shoots decent, its what you can expect of LCT, but has some issues.
Note: rifle was stolen from me alongside my other wooden LCK74.
Selector is stupid stiff and hard to get unstiff. Once you have it manageable, it works fine.
Magwell is the worst I have ever seen and is easily the weakest point of the gun, as it has no flat bit inside like a CYMA and as a result, its really easy to over-insert mags. I'm not joking, there is literally nothing in the magwell but the hop up alone. We broke a mag with the other LCK74. LCT recognizes this and sells an insert, but as I said with my review on the LCK74, I am not paying for a 24 dollar piece of sheet metal when it really should be included in the design. My advice is to 3d print one, the files are available, or to make one (its a mostly square shape.)
Upper handgaurd can freely rotate in its bracket, closing the infamous "gap" between the upper and lower handgaurds on one side, and dramatically opening it on the other. They easily could have put a small metal bit to stop it from rotating. It looks kinda silly on the reputation of LCT who is known for exellent replicas.
Dust cover was rather uncooperative in getting on. For whatever reason the CYMA dust covers go on a lot easier than either of my LCT AKs did and I cant figure out why because its a nicer build with better designed faux recoil spring assembly. Once it was on, it was very secure however.
Hop up on this particular gun was bad. From what I recall, it could barely lift .25 g BBs. My friend who owns an LCK104 said that his bucking had no nub on it, and that it was just shoving bucking wall into the bore and barely touching BBs. I was unable to confirm this on mine before it was stolen, but it really had to be cranked to maximum to get .25g BBs to fly straight. I would tolerate this on an AR, but an AK with this pricepoint, cmon. replacing AK hop ups are so annoying.
All in all, if you want a good AK-74M replica, this is your best bet. It looks good so long as you keep the handgaurd from spinning, and it performs as you would expect, good accuracy save for the hop up
Discuss about LCT LCK74MN Steel Airsoft AEG w/ Side folding Stock with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov