- Fully licensed FN Herstal trademarks
- High quality injection molded reinforced polymer frame
- Ultra light weight, compact, and maneuverable
- Ergonomic design makes the weapon incredibly comfortable to shoulder and fire
- Metal upper receiver assembly with tactical rail for mounting lights, lasers, and optics
- Bullpup design allows for a longer inner barrel to improve accuracy and rang
- Fully ambidextrous controls allow the weapon to be operated by either left or right handed users without reconfiguration or modification
- Reinforced TM compatible ver.6 gearbox
FPS Range: 400-415
Developed in response to NATO requests for a compact but effective firearm for vehicle crews, support personnel, special operations, counter-terrorist units, and crew served weapon operators, the FN-P90 manages to excel in many of the categories FN-Herstal set out to achieve. The futuristic Personal Defense Weapon (PDW) / Sub-Machine Gun (SMG) entered production in 1990 and began service starting in 1991 and is continued to be used by militaries, law enforcement, and special operation groups around the world today. Chambered in the 5.7x28mm cartridge, the weapon far surpassed the 9x19mm weapons in performance and handling. The small caliber boasted greatly improved velocity at only half the weight of standard 9x19mm cartridges thus allowing the user to carry a great deal more ammunition into combat. Additionally, more rounds can be loaded into a magazine thanks to the cartridges relatively small diameter. Due to its incredibly high velocity, the 5.7x28mm cartridge fires at an exceptionally flat trajectory with roughly 30% less felt recoil which greatly improves accuracy even under fully automatic fire. The FN-P90s design came about after extensive ergonomic research; its small profile makes it ideal for tight, confined spaces as well as for personnel who require a concealable weapon. Featuring true-fully-ambidextrous controls, the FN-P90 is the first of its kind to be right handed and left handed shooter friendly without any modification or re-configuring of the firearm. The weapons charging handle, magazine release, and back up sights are symmetrically distributed on both sides of the firearm; the safety / fire control is located at the base of the firearms trigger which can be easily accessed with the thumb or index finger. The weapon also uniquely ejects spent casings downwards away from the users face which makes for a much more pleasant shooting experience when needing to transition from left to right and vice versa.
The FN Licensed Airsoft P90 accurately replicates the great handling and ergonomics of the real P90 with its fully ambidextrous control layout and comfortable grip. Just like the actual P90, the FN Licensed Airsoft replica consists of a durable reinforced polymer frame with metal barrel and upper assembly. Despite its small size, the P90s bullpup design allows for a considerably longer barrel than most sub-machine gun class weapons for improved range and accuracy. Fast, lightweight, and compact, the P90 is one of the most effective weapons for CQB and room clearing.Length:
68rd Standard Capacity. Compatible with other similar P90 Series Airsoft AEG MagazinesMuzzle Velocity:
400~410 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 6 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
9.6v P90 type NiMH or 7.4v 1500mAh PEQ type LiPo recommended (Wired to the rear with a Small Tamiya connector)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, Battery, Charger, ManualManufacturer:
SoftAir (Licensed by FN Herstal) / OEM: CYMAThings you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.
Spare Magazines – Stay in the fight longer by bringing more ammo with you.
BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.
Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
About Cybergun / Spartan Mil/LE
Cybergun is the world leader in designing and distributing replica dummy weapons for video game aficionados, sport or outdoor shooting, and collectors.
(Write a review)
From the pros:
1.400 FPS with a short barrel 29 cm.
3. Short, maneuverable, takes up little space.
4. The minimum weight.
5. Quick disassembly.
6. Simple design, high-quality components.
7. Charger and 9.6V 1100 mA/h.
8. Nunchak 9.6v 1600 mA/h can be inserted.
9. It is convenient to carry the handle upside down like a bag.
10. Transparent magazine.
11. 300 bb magazine available.
12. In auto mode shoots single, If you pull the trigger further, it goes to the auto.
13. The bearing is under the spring.
14. The gearbox is protected from dust by the shell.
1. The sharp edges of the switch. Poor visibility of signs on the switch. Hard switch operation.
2. Charger without auto shut off.
3. Loud for the ear nearest to the butt.
1. The sharp edges of the hopup window on the inner barrel are rounded.
2. The sharp internal edges of the cylinder port are rounded and polished.
3. A new extended ring #14 on the piston.
4. Installed nozzle from m4 with o-ring. Size ~ fits.
5. Added grease on the gears, on the piston, on the nozzle, on the control nozzle and others (not on elecric parts).
6. Removed the ringing shutter imitation.
7. Sandpaper rounded the sharp edges of the plastic, where the cheek is pressed.
8. The silver marker tinted side of the switch in fire mode.
FN Herstal Licensed P90 Full Size Metal Gearbox Airsoft AEG (Color: Dark Earth) $119.99
Pros: Gearbox is very accessible. Weapon body is compact, ergonomic, and ambidextrous. Comes stock with top and side rails for accessories. Metal bushings stock; metal spring guide with bearings stock. Barrel is spring loaded against the hop up chamber. Long style motor is mounted in an integral cage. Relatively strong spring for a stock gun. Weapon is light weight and well balanced.
Cons: Stock trigger has a very long pull due to bullpup design. Magazines are much rarer than M4/AK47 style magazines and generally hold less; battery space is limited, Hop up chamber seems cheap; piston seems cheap. Button used to spring load the barrel has springs that are not captive and fall out easily at inopportune times.
Other: Bullpup design comes with advantages and disadvantages over non-bullpup designs; while magazines are challenging there is an aftermarket kit to convert it to take M4 mags, but it limits the ambidextrous nature of the weapon. Weapon is very easily taken down; upper separates with a button push and the gear box is removed with only 2 screws. Barrel is short but the weapon is very compact for PDW/CQB style. Weapon includes an ambidextrous charging handle that doesn’t actually do anything but is easily removable.
Inside the Gearbox: Version 6 gearbox is said to be resilient. Gearbox is easy to remove and install. Modifications to parts in the gearbox are therefore relatively easy to do quickly. The gearbox was filled with grease out of the box and I replaced it with a more appropriate amount of grease. Each of the three main gears had a single shim on both sides; I removed them all and was able to get a better shim using just these 6 shims. It wasn’t bad out of the box but it was improvable using the stock shims.
The spring guide is metal and has a roller bearing in it; I see no reason to replace it with an aftermarket part unless the stock one breaks. The spring seems to be pretty strong; I’m not sure what rating it would be but the website says it shoots 400 fps with .20 bbs out of the box; I will count the teeth on the gears next time I take it apart but I’d guess the motor has decently high torque for a stock gun to be able to pull this spring. I don’t have access to a chrono yet so I can’t run my own numbers for FPS and rounds per second.
The anti-reversal latch looks very well machined; it looks like the aftermarket ones on Evike do; I don’t think there is any reason to replace this with an aftermarket part unless the stock one breaks.
The motor has no branding or any writing on it. The gears seem to mesh well with each other and smoothly rotate. The gear bushings are metal. My calipers need a new battery and thus I can’t measure them accurately. Two of them would not stay in place easily so I added a dot of superglue to help keep them where they are supposed to be.
The tappet plate is unremarkable.
The cylinder is ported in such a way as to be helpful for the short barrel of the gun; it’s important to install it the correct way for proper air movement; if you put it in backwards you lose all your FPS. The piston, piston head, and cylinder head are all functional but not particularly great quality. These would likely benefit from a replacement.
Outside the gearbox: The gun is very comfortable to hold; it doesn’t weigh very much and the weight it does have is very well balanced due to the gearbox being in the back of the gun. The battery compartment is small but I was able to fit a tennergy 11.1 lipo in it with out any issues; the fuse holder is very large and obnoxious. Getting all the wiring inside the gun is annoying and I will likely shorten a lot of it when I get to rewiring the gun. The gun sounds pretty loud when firing as the gearbox is about 3 inches away from your face when you use a proper cheek weld.
The barrel is held against the hop up chamber with a spring. It is held tightly and there is no wiggle in it. I was able to easily remove the charging handle and it’s associated springs. I did this as there is no function to the charging handle and the springs make noise; this also reduced weight a small amount. I was able to put a shim inside the trigger to eliminate a lot of the take up in the long trigger pull; this was easily done with pieces of an eraser and super glue I had on hand at home; this modification was free and makes the trigger pull feel much more similar to other non-bullpup guns.
The button that holds the upper receiver to the lower receiver has two springs in it. These springs are not captive and will fly out very easily. This is my least favorite part of this weapon. I think it will be relatively easy to fix but it’s very annoying at the moment. I was able to remove the side picatinny rails easily for now as I am not currently using them and this reduced weight a minor amount.
I will likely install a longer barrel with a full cylinder in the future; a 450mm barrel should be able to be accommodated with a 7” barrel extension/mock suppressor. I will also likely get the m4 magazine conversion due to better magazine availability. Even with a longer barrel the bullpup design ensures the weapon will be very compact. The P90 was designed for CQB but the spring it comes with puts it at too high an FPS for CQB at most places. Personally, I will likely get a lighter spring to use for CQB and keep the current heavier spring for playing outdoors.
Conclusion: It’s a decent enough platform for $120. Good gearbox that is easily accessible; ergonomic design, light weight, strong spring, some minor issues that I don’t particularly like but overall a decent buy.
"Man, as a tech buying a cheap gun to build off of and expecting to swap everything, this gun impressed me at just about every turn.
First off, it's one of the simplest guns to work on. Wiring is all outside the gearbox with plenty of room to spare in the body believe it or not. The massive stock fuse could be swapped for an auto fuse instead to save space. I installed a 3034 mosfet and it's able to sit between the body and gearbox easily. Only con about the space is that you can only fit batteries the size of a 9.6nimh, and that BARELY fits.
The motor is a tank, i believe it's at least 28tpa if not 32. Very good torque but slow rpm, you could probably get away with a 22tpa motor and get a bit more rps on it stock. Gears seem decent but not anything special, was able to fit a set of zci 16:1s inside with a small amount of Dremel work. Unlike other p90s, this has v2 gears inside it with the oval spur bushings already flipped around which was wierd.. Didn't sound very good out of the box which I figured out was due to bad qc on the bushing slots causing axel wobble. Trying a new gb shell and bushings to see if it can be fixed. These things happen with China qc, but don't let it change your mind about this gun. It's got a steel bearing spring guide and what seemed to be an shs m100 or so spring surprisingly. Standard cyma piston and such, compression is pretty good stock. Even came with a maple leaf style bucking installed but it created too much hop even on the lowest setting so I swapped that.
Let me just say, the barrel had the most beautiful crowning of any factory brass barrel I've seen. It seems to be a tight bore, compared to my 6.03 madbull it honestly looks tighter but I don't have calipers so no way of telling. Flat hop concave nub and this thing will not miss between 50-75ft, once you stabilize the inner barrel. It's got a good 3mm of play and it shows, with every few shots you get flyers. Easily fixed with tape and if you've got extra barrel bushings those fit perfect in the upper and hold the barrel nicely in place.
After having spent the same amount on a jg g3 afew years ago and wasting a week tightening up the receiver and making it not wobble, in comparison the cyma p90 is a better starter gun for anybody, tech or newbie. Honestly should be everyone's first gun. I regret working on v2s for so long now lol. This thing is so solid and well balanced Im glad cyma finally put these on the market. Grab one before they disappear, seriously!
Discuss about FN Herstal Licensed P90 Full Size Metal Gearbox Airsoft AEG (Color: Black / Gun Only) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov