Matrix Terminator Conversion Kit for P90 Series Airsoft AEG Rifle

"Nice conversion kit, the suppressor actually works and everything else as well. The only bad thing is that it is heavy and loud which is very bad for airsoft so take that into consideration.

"I got this for my JG P90 and everything fits very nicely and I replaced the cheap Hi-cap mag with a 360 rd. Lonex Flash Mag (really helps with practicality and there is less time for winding). Thus I'm dishing out 1860 rounds with only a total of 30 seconds winding time. Red dot sights match with this lovely looking kit and a grenade launcher on the bottom as well as a battery attachment on one of the sides and you are set my friend for some awesome suppressing fire.

One thing the box mag has some space in it for the M4 to jiggle but a little electric tape would solve the problem. Loading the M4 mag is kinda tricky, but you will get used to it! The box mag itself has a great fit into the gun and there is no wiggle. The suppressor offers space for a 363mm inner barrel and the tri-rail extension fits on to the front very nicely. But there is about a 1cm wiggle distance but you can probably fix it with some adhesive or tighter screws. The only thing id have to complain about or worth being noted is that :
1)Makes the gun very front heavy (but balance weight distribution) so you aren't as capable in close quarters as before.

2) NO INSTRUCTIONS And some screws were busted (the kit still worked)

3) Box mag only allows right handed shooters to have a correct grip on the gun and makes noise due to the masses of BB's bouncing around.
I give this conversion kit a 9/10

"Everything fits great on my JG P90. Adds quite a few pounds to the gun, but it isn't unbearable at all.
Pros: Looks awesome.
1800 BBS at once!
options for bigger batteries.
rails for more accessories. (I put a mini Grenade launcher on mine.)
Silencer gives more accuracy.

Cons: Comes with a cheap hi-cap M4 magazine
No assembly instrucitons or tools to put in bolts.(luckily a had some but it requires a few allen wrenches.)
Mag release for the M4 section doesn't really work. Seams like its to tight. I would have to take it apart and figure that out. It's not a big deal because you don't need to take the mag out, because the box feeds into the mag.
heavy-ish.

Overall, its a great deal, speaking as you save somewhere around 80 dollars getting it like this.
Definitely worth it.