Custom 7.4V 1500mAh 20C / 40C PEQ Type Lipoly Battery
Perfect size for most PEQ-2, M4 hand guard, small battery compartments like PTS, PDR...ect. Even the very compact PEQ-15 and PEQ-16!
Application: To power Airsoft AEG guns. To increase rate of fire, pull high power springs, increase trigger response time, and to improve the over-all clean look of your AEG.Dimensions:
65mm x 35mm x 20mmPlug type:
Small TamiyaCharging plug type:
BMS / XH 3-Pin Charging ConnectorSpecifications:
7.4 V / 1500 mAhOutput:
20C - Continuous / 40C - BurstCharger:
Not Included. Lithium Polymer / Li-Poly Chargers Only (4-Pin Charging Connector)Manufacture:
To power Airsoft AEG guns. To increase rate of fire, pull high power springs, increase trigger response time, and to improve the over-all clean look of your AEG.
GROUND SHIPPING ONLY NOTICE: Due to US DOT and IATA shipping regulations, batteries shipping Air must have a charge of less than 30%. A lithium polymer battery in this state of charge for long periods of time will become damaged. For this reason, Evike.com will not be shipping batteries via Air shipping methods. This includes all international destinations outside the continental U.S. You will only be presented with ground based shipping options if your order contains a lithium battery.
(Write a review)
"Same here, just like others said. I purchased this battery in Dec. 2016 along with the ARES Amoeba AM-013 gun. Played only ONE game with it. Tried charging it today (May 2017) and it did not charge at all. The battery is totally dead!
Webmaster: Lithium-polymer batteries should not be left discharged or charged for long periods of time. Lithium batteries are best stored at storage voltage above 3.2v per cell. You can determine cell voltage with something like this: http://www.evike.com/products/56138/
Keeping your battery within safe voltages will keep your battery running for a long time. We strongly suggest this at a minimum: http://www.evike.com/products/50878/
"Honestly these lipos are great and work well. Like the previous comment i can agree that maybe some can swell. I have bought 2 of the same battery and 1 only works now. They have good battery life but are not very long lasting as they will swell eventually. Just make sure you have a smart charger and always use a lipo safe bag.
looking for a battery that will fit in a peq box, get this one
looking for a battery that will fit in an am-013 or 014 then this is the one
long battery life
They swell fairly quick
"When these batteries work, they work great. But they don't last long at all.
I purchased one with my Ares AM-013 in January. It lasted about 3 weeks
Before it would not hold a charge any longer. I went to the Evike store and it was
Swapped out for a new one. Now after about another month and a half, this one is starting to swell and no longer works. I'm not new to Lipos. Every other Lipo battery I've ever had has worked flawlessly and I've never had a problem
With one before. Always properly charged and stored and cared for. Not sure if I got 2 from a bad batch or what, but I won't be getting a third.
Discuss about Custom 7.4V 1500mAh 20C PEQ Type Lipoly Battery by Matrix Airsoft with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov