"really beautiful rifle, good internals, works amazingly with a high output battery and high rps mags, only one major problem with it, and mind you this could be just my experience with it, the front rail system screws can be jolted out of place which will cause the rail system to wobble uncontrollably and it just makes the ergonomics of the gun completely annoying. in any other case id definately recommend this great gun. "I have to say, this is a very solid AEG!
I am getting around 150 feet of range with Elite Force .25's and hop-up tuned for flat trajectory. Evike must have heard previous complaints, as this easily outranges many other AEGs I see around.
Comes with 18ga wire, wired to tamiya small type connectors. Fuse included.
Crane stock internal dimensions (since they're lacking in the description):
Sides - 135mm long x 18mm diameter
Buffer tube - Basically useless, fuse holder is too close to opening to allow any conventional Nickel based battery in there.
+Not insane RoF. I can't be spending $100+ on bb's alone! (~15rps?)
+Metal gearbox W/ 8mm metal bushings. At least partially shimmed gears as well.
+Metal buffer tube
+Metal hop-up unit
+Metal High-cap magazine. Feeds nicely on stock motor + gearset.
+Sturdy polymer grip
+Rubberized butt pad
+14mm NEGATIVE threads (notice that the threads are negative. very important)
+REMOVABLE orange flash hider. No set pin, but definitely some kind of glue. (took some work, but got it off with a crescent wrench and a file. Still usable, too!)
-Front flip-up sight is terrible. Looks fine when flipped down, but doesn't line up with the rail.
-Rear flip-up sight has a VERY tiny peephole, and the paint/coating has worn off after less than 10 flips.
-Charging handle attached to a plastic latch opener. Plastic part broke after opening 5 times, and I have no clue where I can buy another :(
-The stock sucks. Adjustment lever needs to be forced into position, and is made with a cheap feeling plastic. Still feels solid when latched.
-After removing the gearbox, the rear setpin comes loose during shooting. Some E-tape fixed that, though :D
-Trigger spring sends the trigger flying when in gearbox. Waaaay too strong, but gives a crisp trigger return.
-Metal on magazine is VERY thin, would feel like plastic if it wasn't cold to the touch.
-Included flash hider is very close to the inner barrel dimensions, could be hit by bb.
And that's my honest review. 4/5 for having minor issues, they don't influence the performance of the AEG. Really want to have a working charging handle, though... "I want to start out saying, do not buy this gun thinking right off the bat you are going get a battle ready dmr. NOT!!! The stock inner barrel and hop up it this thing is a joke! The very first day i got this gun, there was an issue with the selector switch. safe=full auto. Semi=full auto. Full auto=full auto. My other huge complaint about this gun is the mag well. Getting a mag into this thing is a huge problem, once its it, it wobbles really bad. I have tried many different m4 mags, only a few would even fit. If you want to buy a gun that COULD be used as a dmr, prepare to poor out allot of money.
*very solid (other then mags)
*feels very nice
*GARBAGE barrel and hop up
*selector switch broke
*terrible mag well, seriously i cant get any mags in this thing!
If you are looking for a battle ready dmr, then just spend the extra money and keep looking. Read More Reviews Write a Review
« Back to product description
Scope not included Matrix Full Metal Zombie Killer M4-15 Airsoft AEG Rifle by JG
The Matrix full metal Zombie Killer Series AEG rifles are high quality AEG made exclusively to the highest specification of the JG / CYMA OEM factories with unique exterior conversion kits already installed and a 8mm fully reinforced and upgraded metal gearbox that is compatible with all major platforms and fully upgradable. The entire rifle, where it should be metal, is metal. (Unlike some Chinese made AEG sold by other retailers, with ABS barrel, stock tube, dust cover, and other essential parts for the sole purpose of lowering cost.)
The Zombie Killer M4-15 is designed to be a complete system ready for battle. It is equipped for maximum mobility, with integrated RIS system, quick one point sling adapter, M4 pistol stock, ergonomic advanced motor grip, enlarged metal trigger guard, hi-cap magazine, unique laser engraving, one piece metal outer barrel, flip-up front and rear sight, retractable crane stock and more!
Features: Full Metal Receiver and Barrel Assembly RIS Front End for Tactical Accessories Full Length Top Rail for Optics Flip-up Front and Rear Sights Front Sight Built into Top Rail Ergonomic AR-15 Motor Pistol Grip Retractable Battery Crane Stock Full Metal Gearbox with Reinforced Internal Parts Enlarged knight's type metal trigger guard. Takes all M4 / M16 hi-cap, Drum & Mid-cap magazines. Hi-Cap Magazine included. Reinforced full metal 8mm lipoly ready gearbox. Fully upgradable. One piece metal outer barrel. Adjustable Hopup for maximum accuracy and range. Length:
300rd Hi-Capacity. Works with Matrix, G&P, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG Magazines
370~400 FPS (Measured with 0.20g BBs)
Ver 2 / 8mm / Full Metal, Fully Upgradeable
6mm Airsoft bb. High quality bbs recommended.
9.6v Small Butterfly Type recommended (Battery not included)
Wanna chat about
Matrix Full Metal Zombie Killer M4-15 Airsoft AEG Rifle by JG?
Have questions about this item? We monitor these comments daily, but it may be faster to
email us directly or call us at 1-626-286-0360.
Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!