Maple Leaf SUPER Hop-Up Bucking for Airsoft AEG Rifles (Type: 70 Degrees)

"You already know this is one of the best buckings in the world but I'll add my $0.02. I found that when combined with a MAXX MI-Pro, tightbore, and optimized Air Nozzle Cylinder and piston set, I was able to drop my FPS down to a wacky 275 FPS (out of a 370mm barrel), and yet, despite that, with 0.25 g BB's was able to get a 200 foot range effective. And I can verify that it is 200 ft as I use a laser rangefinder for all my testing. And I would argue the bucking is the primary cause for that outlandish low FPS combo yet staggering range. If you prefer Low FPS, high endurance guns (M90 spring for example), this bucking is a must have.

Also, as a tech this comes up a lot, this is a THIN bucking, not in the durability sense (I go for 70*), but in the sense that you will be able to get it on the barrel and into your hopup with risking tearing it nor having it move out of place. Other buckings often have that problem and reduces their effectiveness (seal doesn't seal in the right place and you get pressure leaks) but this does not so 1 more reason to recommend it.

"Dropped one of these into a LCT RPK NV. Easy mod. This bucking seems way higher quality than the stock LCT one. It seemed to perform pretty well. Predictable groupings and easily hopped 0.28g. For $10, it's a no brainer upgrade.

"AMAZING PRODUCT! I was using the standard Macaron bucking for the past year and it was working well. But, I wanted to see if I could get something even better, so I tried this. HOLY COW! This this thing is amazing. For starters: it had a squiggly ridge on the outside to help seal against the hopup chamber. Then, there’s another ridge on the inside of the bucking that presses tight against the chamber. Lastly, there’s two nubs near the feed lips, flanking the contact patch, that also help the bucking press tight against the chamber. It can be a little tricky getting the bucking onto the barrel, but once you do it’s on the very snug. And it seals beautifully in the hopup chamber. As for performance it speaks for itself. I got effortless 100ft shots with pinpoint accuracy. 200-ish ft shots had a bit of a spread, but it was very minimal. Currently running it in a Maxx ME Pro with an Angel Custom 6.03 barrel, and Maple Leaf Omega nub. Chronoing about 350fps with .30s. I’m interested to see how it would perform with .32 or even .36 bbs. Heck, I may even get a 6.01 barrel just to see how far I can take my performance. All in all, this is a great bucking and I can’t recommend it enough.