LCT Airsoft TX-S74UN Tactical Full Metal AEG with Side Folding Stock

"Great rifle. Shoots just as far as a full length ak in a smaller package. Built much better than a cyma. The only down side is the battery space. I can barely fit a 7.4 rectangle battery. I ordered some 11.1v ak stick lipo batteries but theres only a few places that carry them for some reason. It has quickly became my favorite gun.

"Internals:
Not sure how it functions in stock form because the moment I got it some of the internals were replaced. The Stock piston is a half metal rack but started splitting the rack on the first game day. I believe it was because I did not correct aoe (I had a new piston on the way and just figured I’d try the stock one out) The piston head and the cylinder head was metal and built well. The cylinder on the other hand looked like it had some defects on the outside where it got nicked near the vent hole but the inside seemed ok. Tappet and loading nozzle is ok.
Side note- Gate titan v3 is a perfect fit with no modifications to the gearbox or selector plate
-Not all hop up chambers for ak’s are the same spec make sure it’s something like a lonex type if you plan to upgrade it (lonex is a perfect fit)
-My asg cnc motor was tad big for the cage so you’ll need to dremel some material away on the motor cage for some motors.

Externals: this thing is solid. There is absolutely no wobble anywhere. Some of the rail screws were a little on the loose side on delivery so just tighten them up a bit. It has standard ak 24mm threaded barrel with a 14mm adapter if you want to use regular suppressors or flash hinders but the adapter take a bit to get off.
Side note- us palm pistol grips need some trimming to fit
-retro arms selector switch needs trimming to fit

Mag compatibility: I’ve tried Echo 1, and pts us palm mags so far and they feed and fit perfectly. The stock mag on the other hand feeds fine but the fitment is really tight. You’ll have to sand down the front portion or just keep putting it in and out so it wears down a bit.

The only thing I don’t like about this ak is the fact that you can’t take off your rear sight post (because the dust cover is on a hinge on the rear sight) to get to the 2 grub screws to take the barrel assembly off. You can get to the grub screws with a standard L shaped Allen key but it’s a pain to do it through the gas tube doing 1/8 of a turn at a time.