- Precision CNC machined aluminum alloy upper receiver
- Fiber reinforced injection molded polymer lower receiver and furniture
- Ventilated handguard with 20mm top rail accepts accessories such a PEQ boxes and optics
- Full length top rail perfect for mounting optics
- Metal alloy adjustable folding bipod and adjustable rear monopod
- Adjustable stock allows user to customize length of pul
- Bullpup design allows for a longer barrel while still maintaining a short profile
- Forward magazine caddy stores spare magazine forward of the trigger to facilitate quicker reloads
The futuristic DSR-1 bullpup style sniper rifle that has been featured in many popular video games and films is finally back and ready to rock the airsoft field (or your man-cave wall). Coming directly from the OEM of the original ARES DSR-1, this rifle returns just as you remember it; big, heavy, and intimidating.
With its precision CNC machined aluminum upper and barrel, this rifle definitely isnt lacking in the realism and weight department. To help offset some of the weight on this hefty rifle, the lower receiver and furniture is constructed out of fiber reinforced injection molded polymer.
The rifle features a fast short travel bolt and a forward magazine holster to help speed up the time between shots as well as reloading. Built into the rifle are a set of adjustable steel folding bipods and an adjustable rear monopod to help with stability. For added comfort, the stock, cheek rest, and railed forward hand rest is adjustable for each shooter.
This specialized rifle was developed for police and counter-terrorist sharpshooters. Its bullpup configuration allowed for a full length match grade barrel to be used while still maintaining a manageable profile without sacrificing range or accuracy. The DSR-1 was adopted by the elite German GSG-9 counter-terrorist unit as well as various other European special police agencies for its remarkable accuracy and small profile.BB Caliber:
Aluminum, Fiber Reinforced Polymer, SteelPackage Includes:
Rifle, 2x Magazine, BipodManufacturer:
6mmProShop / S&T
FPS Range: 400-450
California residents click here for Proposition 65 warning
Established in 2011, 6mmProShop Inc. is a USA based manufacturer and distributor with a mission to bring law enforcement training, Airsoft sporting events, and military simulation to the next level. 6mmProShop features exclusive licensed products, unique innovations, and distribution rights of many exciting products from Japan, Europe, South America and Asia. With headquarters located in the USA, 6mmProShop offers unmatched product support, inventory availability for resellers, and world-wide exclusive products!
(Write a review)
"This rifle is great to look at, intimidating. Exactly what it says. And everything external made spot on and sturdy. However, the bipod is a bit trouble some, as the allen key bit on the top where the bipod pivots, that loosens up over time. Now if someones not prepared they WILL lose it. So a fix there.
On a another bit that REALLY, caused me to linger towards the lower mark, is that this rifle is extremely hard to get ahold of parts and only thing upgradable is the barrel. Unless your good at tinkering and jury rigging. Now, the main part that wore out extreeeeeemly fast and Ill emphasize this very much. Because the trigger sear is made out of a pot metal material that you can easily file, cur with a box cutter to make it 90 degrees, and sand. Its so bad that when you go to shoot, the push bolt cylinder( a part thats steel and circular and need an allen key to take off) wears out the sear fast. And I mean fast. As after Id say A mag, id see shavings from that sear in the bolt cylinder and have to clean it regularly. Thats my biggest concern is that sear. If an upgrade for it would come out, perfect. If not, itll be hard to find that specific part as Ive called and emailed to no success, the part access is extremly hard to find, it aint like a typical sear, its box looking, had to drilled out bits on the side that springs go to, and a (T) shaped hole in the middle, with an angled edge where the trigger arm fits through to push up the sear.
On another note, the barrel is an AEG variant standard so thats good for upgrades as that is widely available.
The hop up rubber is the same as the sear, hard to find. As it is like a longer version hop up of the asg 308( L96 variant) the trigger pull is a little heavy but fine.
Accuracy out of the box, is alright if your target is within 140 ft youll hit them with 32. Bbs no prob, around 160, it definitely needs the barrel upgrade.
Upgrade wise its hard to find ESPECIALLY replacements, as this is my biggest concern for this rifle on the rating. That, and the sear that is made out of a metal that wears fast from the cylinder every time you pull the trigger causing stripping of be sear.
If this rifle had upgrades and I mean upgrades that ensure pull bolt not Push Bolt As this rifle is PUSH BOLT, thatll be great. And upgrades towards the internals. Then this rifle will be more than an intimidating rifle on the field. Id say itll be a rifle people wouldnt want to to get shot at with.
So thats the end of my rating, and description of my experience and recent use of this rifle. Honestly if I had known the parts were hard to find and this rifle has minimal upgrades, i wouldnt have grabbed it. But above all. Its an alright piece
Discuss about 6mmProShop Spring Powered Full Metal DSR-1 Advanced Bullpup Sniper Rifle (Color: Black) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!