Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

ASG CZ Scorpion EVO 3 A1 Carbine Airsoft AEG (Model: BET Carbine / Black)

ID: 68013 (AEG-ASG-50145)
ASG CZ Scorpion EVO 3 A1 Carbine Airsoft AEG (Model: BET Carbine / Black)
Hover or touch above to zoom
Optics and other accessories not included
Youtube preview Product image 1 Product image 2 Product image 3 Product image 4 Product image 5 Product image 6 Product image 7 Product image 8 Product image 9 Product image 10 Product image 11 Product image 12 Product image 13 Product image 14 Product image 15 Product image 16

$449.95 $349.95

MAP ProtectedExempt From Coupons
The manufacturer of this product enforces a strict minimum advertised price (MAP) policy which excludes this product from any additional discount coupon codes. This item, however, may qualify for free shipping.
Canada Export CompliantCanadaExport Compliant
This gun has a muzzle velocity rating (FPS) between 366 and 500, and is compliant for export to Canada.
Free ShippingNo Coupon Required
Free shipping within lower 48 US states, no coupon code needed!
Model Options:


  • Fiber reinforced polymer receiver w/ CNC machined metal outer barrel, flash hider, and barrel nut
  • Newly designed gearbox w/ QD spring change capabilities
  • Folding / removable stock
  • Electronically controlled ECU gearbox for better battery and motor efficiency while offering crisp trigger response
  • Functional bolt lock
  • Empty magazine detection
  • Ambidextrous controls
  • 4 position fire selector w/ genuine 3-round burst capabilities
The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.

Manufacturer: ASG

FPS: 390


Length: 820mm / 630mm (Total / Folded)
Weight: 2400g / 5.3lb
Inner Barrel: 407mm / 6.04mm Bore
Magazine Capacity: 75rd Mid-Capacity
Muzzle Velocity: ~394 FPS (Measured with 0.20g BB's)
Gearbox: Proprietary EVO 3 A1
Fire Modes: Semi / 3rd Burst / Full-Auto, Safety
Battery: 7.4v / 11.1v LiPo Small Tri-Cell Type Recommended - Wired to front w/ Deans Connector (Not included)
Hopup: Yes, Adjustable

ASG Limited Manufacturer Warranty:

This Proline airsoft gun is backed by a 12 month limited warranty from ActionSportGames. Should this airsoft gun fail due to a defect in material or workmanship during the warranty period, ActionSportGames will repair or replace it, free of charge. Please see the included warranty card for warranty details.

About ASG

ActionSportGames is a worldwide leader in the business of replica firearms and accessories manufacturing including Airsoft guns, Airguns, CO2 guns and firearms replicas. We specialize in 1:1 scale replica guns and accessories for fun, action, sports, entertainment and collection. Today were proud to be recognized as the innovator and manufacturer of the CZ EVO3 A1 AEG and having introduced several Airsoft versions of this popular Airsoft gun to the market.One of our goals is to become the preferred supplier in the firearms replica business through worldwide license agreements, quality brands and premium service before, during and after sales.

21 Customer Reviews

(Write a review)

by Blake A. on 08/24/2022
"So I spent around two weeks researching the best AEG on the market and the general consensus was consistently bringing me to reddit threads and Youtube videos on the Scorpion Evo. All the reviews stated that this is the best out of the box airsoft gun for the price. I watched video after video and read thread after thread until I was convinced.

Order contents:
ASG CZ Scorpion EVO 3 A1 Airsoft AEG (Model: BET Carbine / Black)
Matrix Lipo 3+ Compact 1-3 Cell LiPo / Li-Ion Smart Balance Charger
Matrix High Performance 11.1V Stick Type Airsoft LiPo Battery (Configuration: 1200mAh / 20C / Deans)

The item came in much faster than expected. I opened the box and it appeared to have already been opened? Not sure. The BET Silencer had visible finger prints on it (Not a big deal). I hope it was just where they tested the weapon. Anyhow, the weapon itself looked beautiful.

Contents of box:
ASG CZ Scorpion EVO 3 A1 Airsoft AEG (Model: BET Carbine / Black)
One ASG 75rd Standard Magazine for CZ Scorpion EVO 3 A1 AEG
Evike Playing Card

So I noticed straight away that my box was missing the iron sights. I contacted Evike and they were awesome. They sent a replacement straight away without any issue.

As far as the weapon goes, I only have one real complaint. And it is the barrel assembly where you put the battery. I ordered the recommended Matrix High Performance 11.1V Stick Type Airsoft LiPo Battery (Configuration: 1200mAh / 20C / Deans), and let me tell you when I say it is a task getting the battery in the weapon and closing it all back up. First, you unscrew the Silencer (BET), then the handguard just pulls off. The bolt and spring are just sitting in the handguard and WILL fall out every time if you're not careful so be sure to pay attention. There is also a sling mount that literally just lays in a slot and will fall out too so I recommend doing all this indoors, on a table, with great lighting so you can see when something falls out. So the battery plugs right in and fits easily inside the top of the weapon. The issue comes when putting the weapon back together. The handguard is very difficult (For me at least) to put back on while holding the battery in place, holding the bolt and springs, holding the sling retainer, and shimmying the guard until it finally sits flush on the weapon. The last issue is that the bolt slides forward and back (as it should), BUT if you put the battery in too far to the left, the bolt will get caught on it as there is no dedicated slot for the bolt. They just sit in there together and will jam up if they get too close.

Now that the bad is out of the way, we will get to the good. The weapon feels very well made. Every piece is beautiful and it literally looks like the real weapon aside from the small orange tip. The three fire modes work perfectly and the selector switch clicks very well. The stock folds and clicks as it should with no issues. And it fires very well. I have had maybe ONE or TWO bbs that didn't come out of the barrel going full speed. But out of around 2,000.. That isn't bad. It fires like 19 rounds a second which for me is insane.

So the magazine is a love/hate thing. I love that it fires 75 rounds without having to crank a cog. It feeds them perfectly every time and they look/feel amazing. HOWEVER, loading these magazines is not fun at all. I didn't have a speedloader (My fault) so I used a straw. If you're hand loading these, be careful.. If you compress the side retainers in the slightest, you will have a volcano of bbs shower the room. I have since then ordered an electric speedloader which made life much easier.. But it still is a chore loading these things. And be sure to order the three pack or the high cap mag because no other magazine fits these, and they aren't cheap either. One last thing. When using speedloaders, the ODIN will NOT work. You either have to shave it down, or 3D print a connector. Regular hand pump speedloaders seem to be okay. But I am warning you because no one warned me.

Trigger is super responsive
Modular (Installed a grip, red dot, red dot protector)
Picatinny and M-LOK for ultimate customization (Picatinny on top/M-LOK on the bottom and sides)

Battery compartment could be better, but I understand that space is very limited on this build
Magazines are very difficult to load without correct speed loader (no one really emphasized on this in the vids)

I haven't owned an airsoft fun since 2014 because mine was stolen. BUT I can tell you that this gun makes me want to get back into it. Despite the hiccups (probably due to my inexperience), this weapon is top notch. It is solid, does not feel cheap in any way, I trust the internal components, and they pulled every stop. Compared to most of the AEG's I've researched, the price point is good for what you're getting. Time will tell, but I am overwhelmingly happy with this!
by Amy B. on 01/10/2022
"great gun works flawlessly love the range i get out of it. The only issue I've seen is the the hop up unit/ feeding tube was damaged. not sure if i put the mag in to hard or it came like this but the feeding lip has a chunk of it missing. the gun still works just a little paranoid that it might just stop feeding in the middle of a game. other than that great gun 10/10 would think about buying another one.
by Connor C. on 01/08/2022
"I got this gun about 3 weeks ago and the battery came 2 days ago. I got the matrix battery, it doesn’t fit in the gun though. So buy a peq box if the battery doesn’t fit.

High Rps (18 rps)
Fast trigger response
Burst fire
Bolt release

Batteries are hard to find online
Installing battery is annoying.

Solid gun for the price

Comments & Community

Discuss about ASG CZ Scorpion EVO 3 A1 Carbine Airsoft AEG (Model: BET Carbine / Black) with your friends and fellow shoppers!

Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!

Warning: California's Proposition 65

Customers who bought this also purchased

Parts and accessories may not be compatible with the product displayed on this page. For compatible parts/accessories, see the You May Also Need section and please verify details on the product description page.

Search tags for related products