Maple Leaf Decepticons Hop-Up Bucking for WE-Tech/Tokyo Marui Gas Guns (Type: 70 Degree)

"Really nice bucking, as Maple leaf’s are the best. Installed the 75 degree bucking in my Redfire PPS green gas Kar98k. This bucking worked wonders in it and greatly improved the accuracy and consistency. I don’t have the Kar98k anymore but I have no doubt it’s still slaying at distance with the new owner. 10/10

"I bought this for my JG Bar-10. it fit real nicely with one exception. The default JG Bar-10 needs you to cut off the arc on the back of the barrel for this bucking to fit. Once on, its a nice bucking. The metal clamp holds it really nice and sturdy. I haven't gotten to do a shooting test yet, but I am sure it will do just fine.

"I put this bucking in my WE GP1799 which is basically a G17 internally, which is a clone of Tokyo Marui Glock. Fits perfectly.

Result:
My groupings went from about 5" to about 2.5" at 25'.

Application:
For this pistol setup, you have to use a nub to truly realize the full potential of this bucking. You can use the F-key or I-key by Maple leaf or RA-tech. Or, you can take an exacto knife and cut an old credit card to fit just under the flat portion of the hopup lever. Double up the thickness with layers and superglue and file/sand as needed to get the right shape. Note: the hopup lever arm will lean on the left side a bit more, so you can file the nub to more of a wedge to account for that. After getting the right nub in, the bucking will hug the bb all around the top surface.