Angel Custom "OMEGA" Zero Trigger System For VSR-10 Airsoft Bolt Action Sniper RiflesAbout Angel Custom "Alpha" & "Omega" Professional Zero Trigger System:The Maruzen's APS / Type96 and Tokyo Marui's VSR10 system are among the two most popular bolt action sniper platforms. The Marui VSR10 system offers great trigger response while lack the ability to manage high power upgrades. The Maruzen system offers the ability to take high power upgrades but lack everything else. The Angel Custom Alpha and Omega trigger system combined the best of both worlds to bring you the ultimate trigger set for your ultimate sniper rifle build.Angel Custom Alpha Pro Trigger System: Advanced light pull zero+1 trigger system for enhanced stability and durability. Designed for all levels of shooters. Featuring stability and durability. Redesigned from the PDI V2 zero trigger system, the Angel Custom Alpha Trigger System is the industry's latest and most durable trigger system featuring shooting stability, adjustable trigger tension and a light trigger pull. The modified sear set provides the highest level of durability while retaining the stock safety function.Angel Custom Omega Pro Trigger System: True Zero trigger for fastest response possible. Designed for advanced users. The Omega Pro Zero trigger system is a true zero trigger re-designed (120% improvement) after the Laylax zero trigger system. Compare to the Alpha system, the Omega system is much more complex in design, with less safety features (a drop of rifle may trigger the rifle, so it is critical that you transport it unloaded), but a UN-matched zero trigger response. The Omega system is recommended for advanced shooters only.Specifications / Features:Advanced Trigger System for the ultimate "zero" loading trigger pull.Provides smooth cocking, comfort loading, and light pull trigger action.Provides the necessary durability for high power operation and upgrades.Integrated modified trigger sear, piston sear and trigger bearing to allow a full range of power upgrades.The OMEGA trigger system provides an adjustable trigger sensitivity for advanced shooting requirements and habits. (clock-wise for lighter pull and counter-clockwise for heavier pull. Avoid over-screwing.)The Alpha trigger system retains the original safety function.Each "Alpha" Pro Zero Trigger system is individually fine-tuned by Angel Custom certified technicians.Designed to provide minimal friction for a fast response and light trigger pull under high power upgrade. (The stock trigger box will experience strong tension and friction after high power upgrades.)Stamping Steel Armor Plate with SUS axle joint.CNC Swedish S136H Steel Internal Sear Set.100% Full CNC High Carbon Steel (H.C.S.) Trigger.The original 45 degree piston design creates unnecessary friction with the Cylinder. The OMEGA trigger's second piston sear will catch the integrated 90 degree piston properly to maximize durability and stability.MAX Piston and Cylinder Head Set included.Special piston head and SUS304 Cylidner Head design allow MAX air seal, directed air flow and quite operation.Integrated teflon spacers to further reduced frictions.Some modification may be required, professional installation recommended.Materials:
CNC Aluminum Plate with SUS axle joint, Carbon Steel Sear Set and Internal PartsPackage Includes:
Complete Omega Pro Trigger System, VSR10 MAX 90 Degree Aluminum Piston with Steel End Cap, Stainless Cylinder HeadProcessing:
100% CNC / Anodized.Compatibility:
VSR-10 G-Spec VSR10 VSR11 Series Bolt Action Sniper Rifles, KS, Echo1 M24 M28 and compatible models.Manufacturer:
Angel CustomThe Angel VSR-10 Cylinder Head and Piston Head:
The inherent design flaw of the Tokyo Marui VSR-10 is its original 45 degree piston head. When a M150 or higher power spring is installed, the piston sear will start to stress the piston and moving the piston forward. As a result, the piston will experience a large amount of friction with the cylinder when you pull and push the bolt. The complete Alpha Pro Trigger System allows provides a Piston featuring a 90 degree aluminum piston with steel end cap and a new concave front end design as well as a stainless cylinder head with concaved rear end design.Normal Trigger:Angel Custom Omega Pro Trigger System:
The 90 Degree Cylinder Set is also a great upgrade for existing PDI and PSS10 Zero Trigger Sets performing a higher gas output than the originals.
About Angel Custom
Angel Custom was founded on a mission to promote satisfaction and excitement on the Airsoft battlefield. Founded by Airsofters searching for perfections, it is our joy and pride to present you our battle tested creations. We strive to provide quality products and services that are reliable and trustworthy to be worthy of the trust placed in us.
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(Write a review)
"This is probably the worst trigger system set available for the VSR-10, for many reasons. To clarify, I used this in my JG VSR-10. First off, the cylinder head does not fit at all. There were too many threads to thread into the cylinder correctly. I emailed Evike about this and they said it would take some time for the tech department to test it. Ok, whatever. It was 1 week and I didn't get a response. After the second week, I replied to the email saying when do you expect this to get a reply, and they said it is the busiest time of the year and they are not sure. On the third week, they finally responded back saying that it was designed for the TM VSR-10, not the JG VSR-10. They recommended me to buy THEIR cylinder for $75! I asked if I would receive that for free, and they said no, which is understandable. They told me to return it, buy the cylinder, or modify the cylinder head. I sent the cylinder head to a guy in town who is really good at modifying parts, and he took off a few threads and moved the o-ring down, because there is no air seal other wise. I don't know what made Angel Custom think that having an o-ring at the top would work... So it fit perfectly. I install all the parts with my LayLax 170 spring installed, and as I pull back the bolt, I hear a crack. I push it back and shoot the gun, and it works. I open up the gun again to see what happened, and it appears the piston tip broke off. Also there was a strange metal piece in the cylinder too. My spring also got slightly bent, as the spring inside the piston was wobbly and the piston didn't hold it correctly. I don't understand why they bother making such a terrible product if it will just break right off the bat. Do not buy this product. It WILL break.
"trigger system - 10/10 very good cnc quality and build to it, using a laylax 170 spring in it.
cylinder head - 0/10 did not fit my teflon cylinder what so ever. most likely to be designed for the angel custom teflon cylinder.
piston- 4/10 i had to modify it to be able to use it with my laylax cylinder head.
All in all I believe angel custom is a hit and miss brand.
"This is by far the worst "upgrade sysyem" i have ever used a $15 boneyard vrs10 system worked better than this please dont waste your money on this it slam fires every single time and always jams
Discuss about Angel Custom OMEGA Pro Zero Trigger System For VSR-10 Airsoft Bolt Action Sniper Rifles with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!