Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
FREE SHIPPING for orders over $99! New deals released hourly and daily. See Deals Here!

Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver IV / Standard Deans)

ID: 27503 (MOSFET-BurstAvocado-lipoDeansV4)
BurstAvocado-lipoDeansV4
6mmProShop859188275034BurstAvocado-lipoDeansV427503
Evike.com
4.5 stars, based on 31 reviews
Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver IV / Standard Deans)
Hover or touch above to zoom
Product image 1 Product image 2
6mmProShop

$45.00

MAP ProtectedExempt From Coupons
The manufacturer of this product enforces a strict minimum advertised price (MAP) policy which excludes this product from any additional discount coupon codes. This item, however, may qualify for free shipping.

Features

  • User-friendly in-line programming - User can program the AEG at any moment by just using the trigger
  • Programmable shot count from 3-9
  • Programmable auto fire mode of up to 30 shots
  • Equipped with battery-low protection
  • Equipped with up-to-date power MOSFET technology
  • Active braking technology employed
  • Beep tones available for programming confirmation and battery low indication
  • Self-adjust battery status to suit various types of batteries
Add "burst function" to virtually any Airsoft AEG in seconds! The Burst Avocado provides you reduced gearbox wear and tear, improved trigger control and tactical advantages! The Burst Avocado is the Ver.4 design of the Burst Wizard we previously offered with "easier adjustment", "mosfet technology" and "real time burst fire"!

The "Burst Avocado" is equipped with low-battery detection. There are 2 pre-installed thresholds at 6.6V and 9.9V allowing a wide range of battery voltage to be used. The device will detect the initial voltage when the battery is connected and determine which threshold to be used. Once the battery goes below the preset threshold, the device will generate a warning tone and stop the gun from firing during trigger pull. This is especially useful for LiPo battery applications due to the inherited trait of LiPo batteries where they should not to be drained completely.

Manufacturer: Avocado Airsoft USA

Model (Type): Ver IV / Standard Deans

Specifications:

Connector Type: Standard Deans
Size: 45mm x 17mm x 8mm
Operating Voltage: 7.2~11.1V
Maximum Continuous Current: 65 Amp
Recommended operating battery type: Li-po 2~3 cells. (7.4~12V)
Programmable "Burst" Mode: 3, 6, or 9 shots
Programmable "Auto Fire" Mode: 30 shots
Battery Low Detection: 6.6V ~ 9.9V
*If your AEG's ROF is higher than 25, there will be a inaccuracy of +1 shot. For example, 2 trigger pull adjustment for 3 round burst and so on.

ONLY use the following types of batteries with the Burst Wizard:
  • NiMH: 7.2v (6 cells), 8.4v (7 cells), 10.8v (9 cells), 12v (10 cells)
  • LiPo: 7.4v (2 cells), 11.1v (3 cells)



  • DO NOT USE NiMH 9.6v (8 CELLS) WITH THIS MOSFET UNIT

    Warranty: The Burst Avocado-II carries a limited warranty when in an unmodified original condition.

    About 6mmProShop

    Established in 2011, 6mmProShop Inc. is a USA based manufacturer and distributor with a mission to bring law enforcement training, Airsoft sporting events, and military simulation to the next level. 6mmProShop features exclusive licensed products, unique innovations, and distribution rights of many exciting products from Japan, Europe, South America, and Asia. With headquarters located in the USA, 6mmProShop offers unmatched product support, inventory availability for resellers, and worldwide exclusive products!

    31 Customer Reviews

    (Write a review)

    by Zack D. on 08/22/2020
    "Just received this in the mail (deans connector version) and it is a great little add on to any AEG. The simple plug and play is great for new players/experienced just wanting to add a simple burst feature to their AEG. The mosfet has active braking which seems to work, but remember still be cautious when using 11.1 lipo/LI-ON batteries since this does not protect your trigger contacts. Any mosfet that is not wired to your trigger contacts directly, does not protect it from failing.
    It recommends that you do not use a 9.6 battery, but I do and have no issues with it. Very simple to use. There are videos on YouTube to visually explain how it works. Definitely recommend!
    by Peter J. on 08/10/2018
    "works good and as expected!
    by Brandon L. on 08/08/2018
    "This does its job. It was great for my DMR, I had it on 2 round burst for a while, and then put it on semi for milsim. it is very sturdy, fits into a buffer tube well, and has kept my wiring alive, with an 11.1v lipo. My only complaint is that on burst, you have to hold down the trigger through the entire burst.

    Comments & Community

    Discuss about Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver IV / Standard Deans) with your friends and fellow Evike.com shoppers!

    Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!

    California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov