ID: 25031 (GR-HFC-M11A1)
Hover or touch above to zoom
To meet US regulations both the Gun and Mock Silencer have Orange tips
- High Strength Polymer Outer Shell with Metal Internal Housing
- Full Metal Reinforced Internal Blowback Unit
- Up to 20 Rounds Per Second
- Steel Retractable Stock with Folding Shoulder Rest
- Full Metal Barrel and Charging Handle
- On-Frame Safety Switch
- Self Locking Bolt locks when out of BBs
- High Strength Polymer Mock Silencer included
FPS Range: 300-330Length Retracted:
435mm / 250mm (with Mock Silencer / Without)Length Extended:
635mm / 450mm (with Mock Silencer / Without)Weight:
300~330 FPS (Measured with 0.20g BBs and Green Gas)Gas Type:
Green Gas, PropaneFire Modes:
Semi/Full-Auto, SafetyPackage Includes:
Gun, Magazine, Mock SilencerHopup:
(Write a review)
"So I bought this specifically to HPA tap it. I have and must say good goodness it is frightening.
You'll need at least three spare mags because this thing can empty a mag in about two or three seconds. This begin said it probably should be said that the semi auto function does indeed work however it has a tendency to cause jams when rapidly tapped. The jam in question is caused by a BB being stuck between the loader/nozzle and the side of the chamber. Really its an easy fix but unless you know about it it can be a little hard to pin down.
Mags are a little expensive, but it's a gas gun so realistically price was never a problem for you in the first place. The loading kinda sucks but nothing unexpected. They hold a fair amount of gas, enough to empty the mag but not terribly much more. The mag that came with the gun was leaky, so I replaced the valve and fixed it for eight bucks.
Accuracy is about as one would expect from a gun with no barrel. Recoil is thudtastic and feels great, this might change once I put that sweet SRU kit on there.
The wire stock and barrel extension are trash, but again I won't be keeping either long. Without them it fits nicely in my drop leg pistol holster which is about as rude as you'd imagine. Now I say all of this without fielding it and I apologize but weather here is terribad. All in all I would buy this smg if I was in a warm southern state or you intend to HPA tap it.
"This thing is a CQB dominator! Battalion in Florida, USA: 13 kills 2 deaths!!!! need extra mags, though.
100ft range. (with a 5-inch barrel, thats pretty good)
Accurate with .25g+
Works with CO2, Red gas, Propane, green gas
Can't even tell its ABS. Feels like metal and looks it, too.
comes with a fun enormous silencer.
If your big like me, it might be a little small. Thats why it has pistol mode!
Don't drop it on diamond. Other than that, it should be fine. Won't break on concrete or pavement.
Other than that, this thing will dominate at a woods or CQB field! clocked it at up to 336.7 with .20g. If you need a good primary or secondary, this thing is a must!
"This gun is awesome. It's slightly more accurate than my G&G Combat Machine CM16 or whatever, which Chronoed at 300 fps with .23 bbs. I think the Mac is about the same fps but tighter grouping, though the bbs start to drop at about 50 to 70 feet for me. With hop-up adjusted right though it's beast. Easily getting kills at 100ft barely lobbing occasionally 150. Insane rate of fire, I loaned it to my buddy and he tried to spray a group of kids; before he could sweep the gun across the whole group he ran out... and then got shot. Takes about 2.5 seconds to empty the mag of 40 bbs... :D My gun on the other hand did not have as many metal internals as i expected; the moving bolt was a polymer, though the trigger assembly was metal, buttstock, and springs of course. I kind of assumed the bolt would be metal but it's held up fine; I actually have two now, scored one on craigslist for a sweet price. I feel like a freakin mech warrior walking around with both stocks extended into my arms hip firing with no suppressors. The suppressors make the gun much louder, cooler looking, and intimidating. I heard they increase you range too but I haven't tested this. The giant orange circle is easy to spot, though; given my position away many times. I was told nail polish remover will do the trick to take it off with no negative affects. Takedowns are annoying to get used to but once you do it's super easy. One of my macs keeps jamming up, not cycling all the way, the part that catches the bolt keeps having friction or some sort of resistance, I'm going to try to clean it with an air compressor then degreaser or something, if it's not perfectly smooth pulling the bolt back it seems it may be prone to jamming. Other one is perfect, though.
Hits hard enough
Easy take down/maintenance
Reliable when clean
Price/totally worth it
Semi works perfect
Price of mags
You will want many more mags
Buy this... But remember you will be fiending for more mags if you wish to run this as a primary, so set aside another 100 for that (mp5 pouches work great for these mags)
Discuss about HFC Full Auto M11A1 / Mac 11 Airsoft Gas Blowback Submachine Gun w/ Mock Silencer with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov