Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

HFC Full Metal T77 Mac11 Select Fire Airsoft Sub Machine Gun

ID: 25030 (GR-HFC-203ZX)
#HGA-203ZX
HFC Full Metal T77 Mac11 Select Fire Airsoft Sub Machine Gun
Hover or touch above to zoom
Product image 1 Product image 2 Product image 3 Product image 4 Product image 5 Product image 6
HFC

$159.00

Free ShippingNo Coupon Required
Free shipping within lower 48 US states, no coupon code needed!

Features

  • High strength polymer outer shell with metal internal housing
  • Fully reinforced metal internal blowback system
  • Cyclic rate of up to 20RPS
  • Steel retractable stock with folding shoulder rest
  • Metal barrel & charging handle
  • On-frame safety switch
  • Bolt locks back when out of BBs
  • Hard-sided case included

Manufacturer: HFC

FPS Range: 300-330

Specifications:

Length Retracted: 250mm
Length Extended: 450mm
Weight: 1580g
Inner Barrel: ~110mm
Magazine Capacity: 41rds
Gas Type: Green Gas, Propane
Fire Modes: Semi/Full-Auto, Safety
Package Includes: Gun, Magazine, Hard case
Hopup: Yes, Non-Adjustable


16 Customer Reviews

(Write a review)

by Brady P. on 07/07/2021
"Works like a charm! Full metal, good kick, really fast ROF and good distance. The only con is that the stock is wobbly when it's folded but other than that I would highly recommend this gun!
by Sandra G. on 05/20/2021
"This gun I super nice, its durable, and it shoots really fast.

Pros:
1# Is a beast.

2# Full metal.

3# has a strong Blowback.

Cons:

1# The stock is a little loose when closed

I honestly recommend this gun, its a steal.
by Christopher D. on 04/29/2021
"I love it!
This version of the Mac 11 is all metal!
This is a literal open bolt SMG.
Not open bolt in the WE Tech sense but open meaning it airs/fires from the open bolt position just like it’s real counter part! This was to mitigate muzzle rise or lift by pushing the SMG downward as the bolt flies forward kicking hard then again coming back.

As a GBB both M11 have a pretty weak kick and out of the box they barely lift a .20g BB.
You can mod the M11 hop up pretty easy though making it hop .30 nicely just look online.

The upper,lower and stock Tip to tail are actually all metal with only a wack looking plastic shoulder brace,the stock is metal and folds only holding stiff while extended but is a bit wobbly folded.

The only plastic on the exterior is that shoulder brace part of the stock and it has a bolt key that fits inside it.
This plastic tool doesn’t seem to fit anything on the airsoft though and may just be a part of the replica that has a real steel function.
I painted that stock brace flat black and it looks 10x better!

This has the exact same internals as the HFC Mac 11.
Uses the same metal Mac 11 gas mags.
In fact the lowers are the same with exception of the stocks.
Both can be mixed and matched to create another GBBSMG,though it does change the weight and feel of both and def favor one over the other after doing it and totally switched them back.

T77 Contains the same plastic factory reinforced bolt with metal rear” reinforced” plate and hook (stock bolt)

It has a painted orange tip not plastic.
Barrel is slightly skinnier and longer than the M11,because of this you cannot use the suppressor that came with the Mac11,mainly because the barrel is too long and hits a detent inside before reaching the threads.

Has a gunmetal grey finish that could be a lot better but still it’s not too bad!

Be careful putting your mag in with the bolt closed.
You should open the bolt before inserting the mag or you’ll break/crush the aluminum nozzle and plastic bb pusher against the all metal mag feedlips!
You’ll also break or disconnect the return spring.
If so it’s attached to a tiny pin stuck in a slot behind the bolt in the center of the reinforcement. This tiny pin will fall out so be careful!

The worst and only downside to this GBBSMG Mac 11 is the plastic,cardboard and aluminum case it comes in.
The frame of the case is aluminum but the sides,front and back face of the case are nothing but just a thin piece of cardboard with a very thin plastic backing similar in texture to a flat lego grass yard square base only much thinner,super thin!

Mine arrived the same way all of them pretty much did,
Cracked on both sides with a puncture right through the plastic front into the cardboard through the dry,cheap ,thin foam.
Both sides of the foam are torn and ripped up worse than i’ve ever seen.
Watching reviews online they’ve all been this way for the last 9 years but while all have torn disintegrated foam not all are punctured through like ours was.

Doing research i found out Ages ago these cases with its contents sat in a shipping container stacked to the roof. After nine plus years the foam has disintegrated flat and the cases plastic was just too thin and brittle for such a heavy,thick replica.

I felt i needed to point this out so you know they were almost all like this and if you’re lucky which i am not maybe yours won’t be cracked with a literal hole through it! Ha!
Item was also fairly priced like the Mac11 aswell!
Even with the case like that i’d buy another one if i can find one.
I tried buying two of these i love it so much!
Only one was left in stock though. Mags were also out of stock!
Please get supressors in stock for all the Mac11!
Thanks EVIKE!

Comments & Community

Discuss about HFC Full Metal T77 Mac11 Select Fire Airsoft Sub Machine Gun with your friends and fellow Evike.com shoppers!

Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!

Warning: California's Proposition 65

Customers who bought this also purchased

Parts and accessories may not be compatible with the product displayed on this page. For compatible parts/accessories, see the You May Also Need section and please verify details on the product description page.

Search tags for related products