Matrix 11.1V 20C 1500mAh PEQ Style High Performance Airsoft LiPO Battery Pack
This battery pack is customized in the shape of a small square as pictured, designed for the popular PEQ-16, PEQ-15, PEQ-2 and other PEQ type battery boxes in the market for external battery storage. Perfect fit all solution for all types of rifles with front-wire gearbox when you re-configure your rifle with a slim / low profile hand guard!!Dimensions:
61mm x 42mm x 19mmPlug type:
Small TamiyaCharging plug type:
BMS / XH 4-Pin Charging ConnectorSpecifications:
11.1 V / 1500 mAhOutput:
20C - Continuous / 40C - BurstCharger:
Not Included. Lithium Polymer / Li-Poly Chargers Only (BMS / XH 4-Pin Charging Connector)Application:
To power Airsoft AEG guns. To increase rate of fire, pull high power springs, increase trigger response time, and to improve the over-all clean look of your AEG.Manufacturer:
GROUND SHIPPING ONLY NOTICE: Due to US DOT and IATA shipping regulations, batteries shipping Air must have a charge of less than 30%. A lithium polymer battery in this state of charge for long periods of time will become damaged. For this reason, Evike.com will not be shipping batteries via Air shipping methods. This includes all international destinations outside the continental U.S. You will only be presented with ground based shipping options if your order contains a lithium battery.
(Write a review)
"Works perfect for my Amoeba AM-013, the battery compartment does not fit many sizes of battery but this actually fits w/ a little wiggle room. I have 5 of these and have never had one die, I typically run 2,5000 rounds before I swap the batteries out. I run this in conjunction with a Lonex A2 motor. Bottom line, these work great with a reliable discharge, fit just about any configuration of battery compartment, and charge quick.
"Got this for the Ares Amoeba am-013 and it fits perfectly! The battery lasted me a whole day on the field.
"This battery will not fit in a PEQ-16 battery box despite it being advertised to be able to do. These batteries are just a hair (~0.5mm-1mm) too thick to fit in a PEQ-16 battery box like this one: http://www.evike.com/products/32273/
I purchased two of these hoping they'd fit after I verified based on the given measurements that they would. However the measurements on the site are under-reported. In reality this battery is between 0.69mm-1.08mm thicker than described. It is also wider and longer than reported on the site.
The actual measurements of this battery are: 76.21mm-78.10mm* x 35.37mm-35.45mm x 20.69mm-21.08mm
The reason I provided ranges was because between the two batteries I received both were larger than the reported measurements and between the two of them they varied in size.
*Included bent wiring in length measurement since the extra length makes a big difference in their ability to fit in battery boxes.
I've successfully been able to use Echo1 XCR 11.1v batteries in a PEQ-16 battery box: http://www.evike.com/products/41588/
They clearly have better quality control as those batteries have much smaller variances in size.
Discuss about Matrix 11.1V 20C 1500mAh Li-Poly Battery for PEQ Type Battery Box with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!