ID: 94537 (AEG-LCT-LCK-15)
Hover or touch above to zoom
All guns ship with federally mandated orange tip, Optic not included
Add to Cart Add to Wishlist
Exempt From Coupons
No Coupon Required Features Ultra realistic stamped steel riveted receiver to simulate the look and feel of an actual AK rifle Heavy weight steel barrel, gas piston assembly, front sight, and muzzle Redesigned handguard assembly with 20mm Picatinny rail interface for lights, grips and other accessories Side folding adjustable buffer tube style stock w/ polymer stock with QD sling attachment point Full length top rail dust cover for optics Adjustable rear leaf sight Standard ver.3 gearbox w/ 9mm bearings (upgradeable w/ standard TM compatible parts) Easy access / easy to adjust slide style hopup Manufacturer: LCT Airsoft FPS Range: 400-420 Color: Black Specifications: Length:
860mm-950mm, 685mm (Adjustable, Folded)
130rd Mid- Capacity. Works with LCT, G&P and other compatible AK Series Airsoft AEG Magazines
400-420 FPS (Measured with 0.20g BBs)
None, 24mm with PK404 adapter
Ver 3 Full Metal, Fully Upgradeable
9.6v Small Stick Type or 7.4v stick LiPo recommended (Battery not included. Wired to dust cover with small Tamiya connector)
Gun, Magazine, Manual
About LCT Airsoft
When it comes to Airsoft externals, LCT is one of the most prolific brands on the market. LCT prides themselves in making some of the most realistic replicas in Airsoft through great attention to detail and by closely replicating the same manufacturing processes used to make their real firearm counterparts.LCT shows the same level of commitment for their AEG internals as their externals; the LCT gearboxes feature an enhanced list of parts users would typically upgrade to. These high performance, reinforced internals boast greatly improved reliability while still remaining completely Tokyo Marui (TM) compatible.
(Write a review) "The most solid AK I've ever had and is now my fav even over my M4's
Pros: no wobble when magazine is in gun
Extremely solid weight
Cons: can't change muzzle if you can let me know how too lol "This is my 6th gun from Evike and I finally have found my go to primary! This weapon was shooting about 357 FPS with .28 bb. I used some MAG 100 round mid caps that fed perfectly and had only a little side to side wobble. This AK is solid and could be used to destroy every other gun in Evike's line-up. This AK really has great range and is all around the best airsoft gun i have ever used. I bought a set of three 11.1 matrix lipo batteries and two of them lasted me a full weekend day in this gun. The only reason i am leaving this a four star instead of five is that i picked this up curbside on Sunday after an hour drive and the pin holding the upper receiver on was to big and the receiver was to short to close so i had to wait a week to go back and get a replacement. You can take this how you like but I would not order this online. Instead go to the store and test that pin and make sure it works other than that the gun works great and is truly one of my favorites.
-steel body and polymer parts are solid and will not move on you
-great outdoor field fps
-no feeding issues
-plenty of battery space
-comes with mid cap
-comes with key chain piece
-will not fit titan batteries which are 7.4
-my gun was broken (read comment)
-sliding hop-up keeps coming not adjusted "This is my new favorite gun. I bought it as an impulse purchase for my Ratnik kit and I'm glad I did.
Externals (10 out of 10): Just from holding this gun you can tell that it is a very solid piece. Everything is very sturdy and the materials used are high quality. However, this gun is a bit heftier than usual at about 8.3 lbs. The orange on the flashider is painted on so there is no plastic to remove. I just spray painted it black and it was good to go. Removing the dust cover is annoying, because just like the real AK-12/15 you have to remove a side pin to allow it to slide off. This pin is stuck in there really tight so you'll have to shave down the holes a bit and use a hammer to stick the pin back in due to it being really tight. The biggest problem externally is the battery space. The gun has two places to store the battery: the upper receiver (like most AKs) and the stock. However, these spaces are extremely tight and you will have a terrible time putting a battery in there. The solution my team and I came up with is to add a wire extension through the stock and have the wire come out the buttpad and connect to a battery bag on the side of the stock.
Internals: (Parts: 8 out of 10 Build Quality: 2 out of 10) The parts inside the gun were of high quality. Out of the box it was shooting 406-421 with 0.2 g BBs. The lowest quality part would definitely be the motor which is just stock. I recommend getting a new motor such as the ASG Infinity CNC U-30000 Short Axle Motor (Short Type) which is what I'm ordering soon along with some steel high speed gears. You can tell that the parts they put into this gun were great, but the way they were put together wasn't. The shimming was terrible which we addressed immediately. The gun also takes regular AK mags such as CYMA due to the LCT magwell naturally on the gun. With slight modification, I was also able to make my drum mags fit to make it look more like the RPK-16 which I will also be buying from LCT when it comes out.
Summary: This gun is very solid and performs very well out on the field. I installed a GATE Titan for 3-round burst and the shots are very consistent. As long as you can address the problems I previously mentioned you will easily fall in love with it as I have. Write a Review
LCT AK LCK-15 Steel Airsoft AEG w/ Side-Folding Stock Tube with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov