NcStar AK QD Side Rail Optics / Scope Mount with Double Rail

"I ordered this rail for a CYMA CM.048 AK74 with a side rail. At first I was frustrated because the rail did not fit securely and the three Allan screws has no apparent use. I contacted NcStar (Evike was no help) and was able to speak to tech support who explained that the middle larger Allan screw is designed to bend the bottom bar of the mount in order to clamp to a number of different ak side rails. After using the screw to bend the aluminium of the mount, I was able to securely mount the device with zero wobble. It took several turns and I had to use the longer side of the allan key for leverage but this system works well.

Having figured this out, the mound is quality and should fit just about any AK style side rail. I just wish there were instructions that explained how much the Allan screws have to be tightened.

"I bought this mount for my Echo 1 Ak700 dmr project rifle. The mount is very well made, being milled from aluminum. It fits very well on the rail with minimal movement and clamps down rock solid. This mount will not move once you tighten down the bolts. The top rail sits about 1/2 inch above the top of the dust cover and is about 1/8th inch to the left of the center line of the gun and slightly angled to the right due to the taper in the body of the ak. Make sure you take this into account when buying a scope for it. A scope with plenty of room for adjustment is key as you will need to compensate for the slight left to right offset. Overall this mount is fantastic and well worth the money.

TLDR: Solid mount, fits very well on echo 1 ak, slight left to right offset, get a good scope with room for adjustment.

"I bought this for my newly aquired we-tech ace vd and i must say that it is rock solid! I was supprised by the heft this thing has too. I have yet to actually use it in a game but i can already tell that there wont be any problems with this mount... if you, like me, plan on putting this on an svd, remove the top dust cover before you install it and before you tighten the mount up all the way, put the dust vover back on o hope this help you, i can say absolutly nothing bad about this product... its amazing! P.S. i apologize if my sprlling is a little off, im typing thisnon my phone...