Features High impact polymer body and metal gearbox 100% Tokyo Marui-compatible, fully upgradeable gearbox High torque motor Adjustable sights Low profile rail for optical sights Ergonomic pistol grip Quick detach flashhider RIS-compatible handguard
JG has released a modern twist on a classic European battle rifle at an affordable price. This is built with many metal parts including the charging handle, selector switch, trigger, and RIS system for mounting your tactical accessories. This AEG fires at an impressive 400 FPS right out of the box, making it perfect for outdoor games where you need that extra punch, or indoors when you want that intimidation factor. A variety of scopes is mountable thanks to this gun's ability to accept a scope mount (available in our optics section) that attaches firmly to the upper receiver. Still haven't convinced the enemy to surrender? Keep shooting! Go with confidence even in long shoot outs thanks to the 500 round capacity of each of the T3's magazines. Whether sniping, supporting, or going in close, you'll never be outgunned if you're packing a JG T3 full size battle AEG.
Manufacturer: JG FPS Range: 300-400 Color: Black Specifications: Length:
Version 2, TM-Compatible
Inner Barrel: 207mm Motor Type:
8.4V Small Type Battery / 7.4v LiPo
Semi / Full Auto / Safety
AEG, Battery, Charger, Scope mount.
About JG Works
JG Works is among the world's largest Airsoft OEM (Original Equipment Manufacturer) factories and has pioneered high quality, affordable Airsoft AEG rifles. As the largest Airsoft manufacturer in China with a longstanding production infrastructure, high volume output, and their close relationship with Evike.com, JG Works has positioned themselves to provide the world market with a large catalog of reliable Airsoft products.
(Write a review) "great gun for the price and size.
Pros. good rof, solid feel, heavy duty polymer body
Cons. mag loose(put electrical tape around the top) "Nice little gun. It is awsome for CQB because of the short length, very enjoyable to use although it is a bit heavy if you try to one hand it lol.
short for cqb
decent rate of fire
a bit heavy for length(not much of a problem)
hop up is very sensitive(small adjustment makes huge difference in hop)
shots way to hot for most CQB places(mine chronoed 390 with .20s)-just by a spring to lower the fps
range is lacking but it is perfect for CQB
Overall very nice CQB gun, would not recommend for field use due to very short range. "To start off this review off, I mainly bought this gun for a shell to drop in a Polarstar F2...
Out of the box performance was a little lack luster. It was shooting 220-250fps, roughly 100fps less than advertised. I found the factory cylinder head was not sealing properly and the piston head didn't have a great seal either (easy and cheap repairs to get it shooting at the advertised fps range or higher). There was also grease in the barrel but some rubbing alcohol and cleaning pads took care of that (make sure to disassemble the barrel from the hop up when cleaning as to not damage the bucking). These seem to have just been bad QC issues. The body itself is made of ABS plastic and seems to be durable enough. The sling mount on the back plate kept unthreading. I ended up getting a longer M5-.80 screw, some M6 washers, nylon insert lock nut, and threadlocker to take care of that issue.
Matrix, TM, King Arms (I've only tested the metal mid-caps so far)
I dropped in an F2 with M4/M16 #1 nozzle with no issues (no modification to the F2 or gearbox itself was needed). I had to file down the selector plate to get the safe function to work properly with the trigger board's selector plate microswitch. I shimmed the trigger as it had a lot of pre-travel. I removed the original battery wiring to the front (had to cut the leads to pull it out). I did not run the FCU cable to the front where the original battery was located as I'll be swapping the original upper, barrel, and stock plate out that came with this gun out for a full size JG T3 upper, barrel, and stock when I want to run it as a DMR (may not even need to use a full length barrel for how accurate and far it is already shooting). I was able to put the FCU in the pistol grip (additionally had to purchase the 7" FCU cable). I made a battery extension cable to run back through the gearbox to where a stock would normally be (250-300mAh batteries will fit in this space). Only other things I upgraded, was to replace the stock bucking and nub. I went to a Maple Leaf super hop up 70 degree bucking and an Angel Custom H hop nub. It shoots so accurately even at range for such a small package.
Hope this helps. Read More Reviews Write a Review
JG T3 SAS Super Shorty RIS Airsoft AEG Rifle w/ Sling End Cap with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov