Cybergun FN SCAR® L MWS Style Gas Blowback Airsoft Rifle by Guns Modify
(Color: Black)

"bought this gun off RedWolf but since I live in California id figure id give a local review after a gameday with it. Initial impressions are great, no lower/ upper receiver wobble at all, mag release is easy to use on both sides and bolt works fine. Out of the box the gun is a little dry, so adding more silicon oil is preferred but also keep in mind the bolt rides on rollers and bearings which is great. PTS MREX does fit but you do need a ~2mm shim to shim where the MREX rail piece interfaces with the front of the upper (jaeger precision has videos) . Internally I put a 4UAD airsoft bucking in it as well with the nub it comes with, got no problems with overhopping .36 outdoors and when the mag is at room temp, it'll shoot prob up to 200 ft if not more (I got the 1.4 joule nozzle). In my opinion don't bother with putting a 150% nozzle spring in it because the stock one is beefy enough. I bought the guns modify one and the stock one was better since the wire is noticeably thicker (hopefully its heat treated though). The hop unit is proprietary and is fine, no need to upgrade it since its proprietary and has its own hop arm that's metal. Trigger is kinda meh you got a little mush and then a decent break which is totally doable. ill see if the guns modify 2 stage trigger fits since the trigger box and its components are from a MWS obviously. Would like to see aftermarket recoil springs for it to be snappier, the gun is snappy enough though and has some good kick, great snap to kick ratio overall stock with propane. I'll also talk about the mags which are FANTASTIC in my opinion. I got guns modify V4 mags, they are VERY lightweight for a GBBR (~322g empty) take about ~20 grams of gas in which you can get at least 3-4 mags worth out of (7grams per). Very easy to load, you pull put the baseplate and push the mag though almost like taking apart a PTS AEG mag, that pulls down the follower and spring and you just load from there, then push the shell back and release the spring with the button. They also have a temperature sticker that reads the mags temp which is pretty neat. Overall really happy with the purchase, accurate well Engineered, a great means to get into GBBR's with buying something besides an M4, and we'll hopefully see more upgrade alternatives for those proprietary parts. Fully recommend this.