Pre-Order ETA September 2016 Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)

Angel Custom37771
1.8 stars, based on 5 reviews

$48.00 $39.99

ID: 37771 (AC-VSR-06)

5 Customer Reviews

by brice s. on 02/15/2016
"NOT a fan serious modification needed for VSR-10 Mb07 platform had to mill down a few 1000s of an inch for it to fit ..really not a recommended..or needed just change the bucking-and barrel for better performance.
by Jack L. on 03/17/2015
"Does NOT fit the VSR-10 spec MB03, it's extremely tight and needs to be forced, the mechanism/piece that hold the mag release spring wont fit on the hop up itself either, the hop up is too wide.
Really disappointed with this product, claiming it's VSR-10 compatible yet it doesn't fit an MB03.
clearly others have had bad experiences as well.
by Daniel B. on 02/26/2015
"It will not fit inside the TSD SD702 outer barrel without major modification. It's outer diameter is bigger than the outer barrel housing it's supposed to fit into.

Like others have said, The metal piece that is supposed to engage the bb release in the mag is too short.

The alignment for installing the hop up adjustment was off. the slot was too deep making the hop up lever like it was set at full adjust and still barely able to install the retaining pin.

This might be ok for some models but not for TSD sd702.
Pre-Order ETA September 2016 Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)
Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)
Here at Angel Custom is where second best, is not good enough! The BEST Hopup Chamber money can buy for your VSR-10 Bolt Action Airsoft Sniper Rifle!

*The Angel Custom Ultimate VSR-10 hopup chamber uses an Angel Custom long version bucking that is even longer than an AEG bucking (one included, and spares are available.) The ability to use this longer bucking is the primary feature of this hopup chamber, providing accuracy, range and durability not found in other VSR-10 setup!
The Angel Custom PSS10 VSR-10 Hopup Chamber features the most advanced Airsoft technology combined with machine precision CNC processing. It will provide your VSR-10 a much better precision in shooting, operation stability and best of all, your VSR-10 will be AEG tight bore barrel compatible. (Saving on a hard to find / expensive VSR-10 tight bore with not so great air seal right off the bat!). This Hopup unit also features a 2 point V shape bucking that will provide you a much better accuracy and range. Looking for a high precision, high durability and high performance hopup chamber for your VSR-10 platform bolt action sniper rifle? This is probably the best of the best.

System Includes: VSR-10 CNC Hopup unit, extended hopup rubber with integrated internal V-teeth and key tool.
Compatibility: For VSR10 Airsoft Sniper Rifles
Material: 100% CNC Military Grade Aircraft T6 Hi-Grade Aluminum
Surface finish: Hard Anodized.
Manufacturer: Angel Custom
Application: For Tokyo Marui, JG BAR, JG G-Spec, HFC VSR-11, WELL MB-03, MB-07, MB-10

Angel Custom vs Stock and others?
  • 100% CNC Milling vs Diecast for highest precision.
  • CNC T6 Military Grade Aluminum vs Zinc Alloy cheap metal.
  • Precision long range hopup bucking vs incorrect sized poor quality stock bucking.
  • Precision for performance vs low budget low quality.
  • Best of the best vs "average".

  • Features:
  • Allow our VSR-10 to use standard AEG tight bore barrels with enhanced air seal.
  • 100% CNC Out of Air Craft Grade Aluminum.
  • Hard Anodized Surface Finish.
  • VSR-10 Enhanced Performance Hopup Rubber.
  • Extended hopup rubber with cap ring to adopt AEG inner barrels with tight air seal.
  • Hopup Rubber has integrated v-teeth to ensure center loading.
  • *Original hopup bar & spacer are not included.

    A Angel Custom AC-VSR-06 Elongated "Range Extension" rubber bucking is included in this system. Spare bucking can be purchased individually right here at!

    FAQ: Can this chamber use the old type, short bucking?
    A: No, and you won't want to. The chamber was extended to provide you the superb performance traditional hopup chamber cannot provide. The Angel Custom bucking out-performs, lasts longer and is simply the best choice!

    This is a pre-order item.

    Pre-order estimated arrival: September 2016

    By adding a pre-order item to your shopping cart, you will guarantee yourself to have the item reserved before they are offered as an in-stock item. Often, you will also save on shipping while not risking a rate item being sold out before you have a chance to buy it. Being the largest Airsoft distributor in the America continent, is the gateway for many exciting items entering the Airsoft world. All pre-order items are tagged with our best estimate on arrival times factoring in manufacture delay, us custom examinations and other factorys to the best of our ability. The goods on pre-order generally arrive before they are past due or on-time 99% of the time. All pre-order items are processed subject to item availability on a first-come, first serve basis. All orders and payments are processed at the time of payment. Buyer reserve the rights to a full refund on any pending pre-order items at any time.

    This item is currently Out of Stock. Most out of stock items are restocked within 1-3 weeks. Some items may take longer. Please add this item to your wishlist to keep posted on its availability.

    Wanna chat about Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale