Matrix Military Style Carrying Handle w/ Built-In 3.5x Scope For G36 Series Airsoft AEG
(Color: Black)

"Yeah you have to get a little close but the G36 adjustable stock helps because the standard folding stock is a bit longer. Fits perfectly on a jg g36. Adjustment are easy to make

"Made slightly better than JG stock scope, i fits very tight, well on my jg id say too tight, i had to userubber mallet to use sling eye attached to set.

"Decent! It is sturdily made of a some composite material I have no idea what (perhaps it says in the product description that I neglected to read before doing this review). Although it clearly states that it is "for Airsoft use only" I have mounted mine on an Archangel Nomad aftermarket Ruger 10/22 stock- made of the same or very similar material. I had some minor trouble zeroing it. If you are as well I would suggest removing the rubber around the front of the scope. It just pops out with needle-nose pliers or the standard screwdriver on a Swiss army knife once you loosen the adjustment screws. This will allow you to zero it easier and will grant you access to the spring that works against the left/right adjustment. My spring had slipped down to the corner and was throwing everything off. As far as I can tell there is nowhere for the spring to seat. The tension is what holds the spring in place. You can loosen the left/right and height adjustment screws all the way if you want to (carefully) push the sight out from the back to remove and replace the spring. Do not attempt to tighten the screws more than snug since the threading is composite and will strip! The scope itself seems to be made of metal. Possibly aluminum. The optics are good and clear with only minor distortion. As other reviewers noted you need to get your eye fairly close to see clearly but I'm not terribly worried about scope bite on a .22lr. Note: The C clip on the back lens of the scope is composite as well. It is part of the mold. I tried to use a C clip tool on it and just succeeded in scratching the "clip". Duh. The carry handle with 3.5X scope "ST36K scope" that I received was branded UFC (Union Fire Company) and I would assume it was originally from Japan since there were Japanese characters featured prominently on the label. Overall it's good. the optics are a very good copy of a $500 H&K scope. I'm not sure how well it holds zero on an actual firearm but am keeping my fingers crossed. I may need to redo the adjustment screws by sinking and epoxying some metal threads. The detachable picatinny rail on the back of the scope/handle is made of solid aluminum. The screws on it attach to sunken brass threads. I replaced mine with a lower profile picatinny rail that I modified and attached an aftermarket all-metal G36 red dot sight that I ordered from Germany.