Laylax First Factory Picatinny Rear Stock Adapter for Tokyo Marui Saiga-12K Gas Blowback Airsoft Shotgun

"Great Adaptor, High Price.

Solid adaptor. Does as intended but a little high in pricing. Aside from its pricing, I would recommend a slight mod to the swivel section and dust cover to make the adaptor a little more...stable and mounted. Hardware included is a simple grub screw the anchors the adaptor through the top and is "locked on the bottom with an allen head screw. You can cinch it down with 2 allen head grub screws on the rail side to push up against the inside of the backplate some more but with the recoil of the saiga12 it will run loose and you'll need to tighten them down again.

Here's where the slight mod to the saiga comes into play. You remove some small material on the mounting plate and a small corner of the dust over and use a "head cap" allen screw in place of the grub screw on the top, blue thread lock everything and it becomes as solid as a dense rock. no movement, no wiggle. Recommend a triangle or D-Ring QD sling point depending on the railed stock that you use.