The NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
- Highest Quality Basic MOSFET on the Market
- Active Braking Technology
- Includes additional kit of Deans-T connectors, single signal wire, and double signal wire for trigger contacts
- Can Handle 7.2v to 14.4v Batteries
- Weather Resistant
- 1 Year Limited Warranty
- Wiring, Deans Plugs and Heat Shrink Tubing included
- CLICK HERE for Instruction Manuals
Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out.Active Brake:
Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such high rate of fire that you are not able to make a single shot? Active brake will sort things out.In SEMI Mode, the brake will not allow for compressing the piston after a shot. The piston will stop in front position which eliminates unnecessary stresses, increasing the service life of Gearbox and its parts. It is very important, especially with an AEG power upgrade.After releasing the trigger, the rifle immediately stops shooting. Thus, you will gain more realism and, additionally, wont lose your precious ammunition.Electronic Fuse:
A new MOSFET will never let you down on the battlefield. It is totally protected against overheating and short-circuits of the electrical system. In case of the rifle becoming jammed, it will protect the motor and the battery against any damage.Digital Interface:
It provides full compatibility with micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, faster trigger response and your MOSFET becomes less heated.3rd Generation Mosfet:
Usage of most modern transistors and microcontroller enabled us to create the smallest and most reliable MOSFET in the market.WE GUARANTEE that the MOSFET will work with the strongest AEG replicas. If you damage the MOSFET, we will reimburse you for 100% of your costs or replace it with a new one at our expense.Dimensions:
9mm x 19mm x 42mmCompatibility:
For Most Airsoft AEG Rifles. Installation required, professional installation recommended. Not compatible with AEGs with Micro SwitchesManufacturer:
For eight years, Gate company has been designing and producing the most innovative AEG Control Systems and MOSFETs. Gate has premises located in Cracow, Poland with products successfully entered global markets and are being sold in more than 20 countries.
(Write a review)
"Fantastic MOSFETs. I have two so far for my loaner pool. They include a signal wire pair to attach directly to your trigger contacts. The MOSFET does support traditional MOSFET wiring as well, where it includes a single signal wire and your positive wiring can be soldered to the other trigger contact on its way to the motor. You don't have to rewire anything if there is a problem with the MOSFET since it's all plug and play after the initial wiring.
This MOSFET comes with active breaking. This helped very much with the two of my builds that are 32RPS. On semi, they can double fire. Active breaking can wear out your motor brushes, but they will typically need to be replaced after every other cleaning of the gearbox. Motor brushes are also cheap.
This MOSFET also comes with debouncing. One of the builds uses a microswitch. A microswitch, as it closes from a trigger pull, can bounce and send multiple signals instead of one. A capacitor on the MOSFET filters this out into one signal.
Overall, these are my go to when not installing a TITAN or Spectre. They are cheap, reliable, and easy to replace if for some reason something was going to happen to it.
"Well I've been building guns for at least 10 years now and just installed a GATE NanoAAB, first GATE product I've used and I have to say, Nice. I installed replacing the existing wires and re-connecting the dual sensor wires provided with the mosfet unit to the two trigger contacts- the full install method. Very easy for a reasonably experienced tech type. Took about 1 hour. I ran the 2 small sensor wires and the 2 larger black and red power wires together through the back of the gearbox into the buffer tube for rear wiring in a G&P M4. A little snug getting everything through the channels but it all fit and hooked up to an 11.1v 1200mah lipo in the buffer tube. Haven't game tested yet but fired a few rounds in the shop and the thing has definitely increased the ROF and stops on a dime with piston all the way forward every shot in semi. Does what it advertises and I'm pleasantly impressed. If you're after a small unit that will save your trigger contacts from frying with time, stops instantly after a full cycle without half cocking the spring in semi, and increases ROF, but you're not interested in programming or fancy shooting modes...get this one. And leave the anti-reversal latch in, btw.
"This works great, I have them in 3 of my guns, they fit in just about any buffer tube, or battery compartment. I wish the instructions were a littler clearer but there were some videos and other info how-to guides that I was able to find. The active breaking helps when running a high RPS motor setup. A good investment if you value your guns internals and motor and want to run 11.1v lipos.
Discuss about GATE Airsoft NanoAAB 3rd Generation MOSFET Unit (Model: Retail) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov