Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 9am-5pm PST
Browse by Type or Category
FREE SHIPPING for orders over $99! New deals released hourly and daily. See Deals Here!

Angel Custom "OMEGA" Pro Zero Trigger System For VSR-10 Airsoft Bolt Action Sniper Rifles

11 Customer Reviews

by val v. on 02/25/2016
"This item worked perfectly in the JG Vsr 10 series rifle.(Tokyo Marui clone.) The trigger does have to have a 90degree piston though to fully function correctly.(which is included in the package.) There was NO HASTLE installing and probably the best high quality trigger out there for that price compared to action army trigger prices. Please consider this trigger before upgrading any gun with a high powered spring this is a must need to upgrade any Tokyo marui vsr 10 clone. Thanks to the angel custom trigger my gun now holds an sp170 spring in it perfectly with no problems. Thanks again, PLEASE READ this WILL be an item you need to get before upgrading any rifle designed for this trigger.
by Justin A. on 10/28/2013
"I've had this set for about a years now with an M190 spring. This trigger set not only can stand up the the pressure of that spring, but it has a very smoothe trigger pull. The only difference you'll notice externally is no safety. A definate 5/5, though.
by Joe S. on 07/01/2013
"I've been using this for about a month now. I've put around 500 rounds through it, still holding up with an SP170. I plan on using an SP190 soon so I can use .43g bbs.


-Durable beyond my expectations

-MUCH easier to pull back the bolt

-Looks cool

-Trigger pull is next to nothing (it goes off if you accidentally bump the careful)

-Works with the JG BAR-10 VSR-10 (with a slight modification to the trigger guard screw, you have to make the rim of the top of it smaller since you have to use a different trigger guard)

-The key to upgrading your VSR-10


-COST!!! It's more than most rifles!

-Installation required modification (with a JG BAR-10)

-Tiny trigger sear (grease or metal shavings from the piston will cause misfires)

-Can be dangerous (always keep your gun unloaded)

Overall: You get what you pay for. If you can afford to upgrade the rest of your rifle, then you NEED this. Very satisfied. Good job Angel Custom.

*Again, be careful with this as the trigger is extremely sensitive!
by Kevin F. on 06/16/2013
"I am very happy to announce that this zero trigger was a literal drop-in upgrade for my SD702, which in a pre-upgraded version of the SD700. I had slam firing issues that I hope to fix with a zero trigger and piston. However, I heard that the 90-degree pistons were not compatible with the SD700 cylinders because they were slightly thinner in diameter than the VSR-10 cylinders.
The piston that came with the Omega zero trigger fit perfectly in the SD700 cylinder. It was a very snug fit and the cylinder head screwed in tightly so I would achieve perfect cylinder compression.

Very fine job, Angel Custom.
by Mark S. on 04/02/2013
"This is the best quality Zero trigger you can get for the price!! If you by this then you will have to do some mods. Ie cut your trigger guard a bit. There isn't much I can say that hasn't been said already in the product description. The difference between the Omega and Alpha is that the alpha has a safety but it is just a reinforced trigger system. It should hold up like the Omega idk if it will hold for a 190 spring. But you will still have the heavy trigger pull.

If you ever think you will upgrade your rig to a 190 then get this and save your self a lot of money. If not then go with the alpha.
by Max C. on 01/11/2020
"I bought this thing and it is sort of good but you should get a Bulltrigg instead because it costs as much but lasts longer and is better in almost every way.
by Maria K. on 02/08/2015
"when i first got this it looked promising and it was it works great and i don't see it breaking any time soon only bad thing with it is that the screws i got with it were WAY to long for it so i have to cut it down to the right size for it to work

i really like the ac trade mark on it(more personal preference tho)
its metal
light trigger pull

the screws were way to long

since a lot of people can't cut down screws or do not want to i would have to give it a 4/5 cause i really shouldn't have to to cut it down in the first place it should of came with the right size screws.
by Jerry S. on 01/06/2017
"trigger system - 10/10 very good cnc quality and build to it, using a laylax 170 spring in it.

cylinder head - 0/10 did not fit my teflon cylinder what so ever. most likely to be designed for the angel custom teflon cylinder.

piston- 4/10 i had to modify it to be able to use it with my laylax cylinder head.

All in all I believe angel custom is a hit and miss brand.
by Steven R. on 08/12/2015
"Does not work with the Echo1 M28, the screw mounts are too small for the stock mounting holes and the O ring for the piston was a little to big so it gets caught in the cylinder....other than that I don't see why it'd be a problem with a vsr- 10 clone.... Trigger system is ready for use which is convenient
by Dane K. on 11/05/2018
"This is probably the worst trigger system set available for the VSR-10, for many reasons. To clarify, I used this in my JG VSR-10. First off, the cylinder head does not fit at all. There were too many threads to thread into the cylinder correctly. I emailed Evike about this and they said it would take some time for the tech department to test it. Ok, whatever. It was 1 week and I didn't get a response. After the second week, I replied to the email saying when do you expect this to get a reply, and they said it is the busiest time of the year and they are not sure. On the third week, they finally responded back saying that it was designed for the TM VSR-10, not the JG VSR-10. They recommended me to buy THEIR cylinder for $75! I asked if I would receive that for free, and they said no, which is understandable. They told me to return it, buy the cylinder, or modify the cylinder head. I sent the cylinder head to a guy in town who is really good at modifying parts, and he took off a few threads and moved the o-ring down, because there is no air seal other wise. I don't know what made Angel Custom think that having an o-ring at the top would work... So it fit perfectly. I install all the parts with my LayLax 170 spring installed, and as I pull back the bolt, I hear a crack. I push it back and shoot the gun, and it works. I open up the gun again to see what happened, and it appears the piston tip broke off. Also there was a strange metal piece in the cylinder too. My spring also got slightly bent, as the spring inside the piston was wobbly and the piston didn't hold it correctly. I don't understand why they bother making such a terrible product if it will just break right off the bat. Do not buy this product. It WILL break.
by Spencer R. on 12/27/2016
"This is by far the worst "upgrade sysyem" i have ever used a $15 boneyard vrs10 system worked better than this please dont waste your money on this it slam fires every single time and always jams