6mmProShop x Staccato C2 Compact 2011 Gas Blowback T8 Airsoft Pistol
(Color: Black / CO2 / Reload Package)

"It does not come pre lubed and greased, sounded like a dry rusted spring when racking the slide. Applied super lube grease, its good now. Came with another plate with non suppressor height rear sight but doesn't come with matching front sight. The little star is for the bottom of magazine to cover the fill port.
The bucking is inconsistent, sometimes too much, then too little using .30g. I could not find the sweet spot. Inspected the hop adjustment arm and looked bent way too much. Unbent it, got better but I still don't like the trajectory compared to my other pistols. Ended up replacing the arm with maple leaf adjustment lever arm.
Barrel is 100mm because it sticks out to the orange thread adapter. I think 97mm would work without the threaded tip adapter but I'm not 100% sure. I'm using an adapter with thread protector that's not orange and a suppressor. Use heat gun to remove the orange threaded tip. Remember the outer thread protector is reverse thread and the adapter is regular.
I don't like the gas piston, sometimes first shot shoots soft, then shoots hard. There's a gap between piston and nozzle. 14mm oring pistons don't fit the stock nozzle. I cant find a better gas piston that will work with it at this time. Will upgrade to TBB. It comes already upgraded magazine parts, and steel internals.
I will not buy a red dot and flashlight that costs more than this gun.
My new favorite pistol. I highly recommend you check the hop trajectory and then check the hop adjustment arm, apply grease.

"Decent pistol out of the box.

Looks: It's a pretty gun, while still retaining combat or duty type looks without having flashy parts that look like they belong better in a gangsta movie. It's not a showpiece, but near it compared to other airsoft combat handguns.The replica is closer in coloring than it's counterpart and has the correct serial number markings from Staccato, instead of having a counterpart logo in it's serial marking above the trigger. Two differences lookswise from the real steel are the exposed outer barrel and the American flag placement being an 1/8 of an inch too low. You'd have a hard time distinguishing the two otherwise. Very good job considering a real Staccato is a $3000 gun and looks it. It's airsoft counterpart loses to AA here.

Reliability: I recently received both the C2 and P models. Both broke their slide stops around the 200 round mark. These are not steel and both broke at the point where the screw holds the outer portion onto the rod holding the barrel assembly in place. They were drilled out and replaced by a thicker grade 8 screw, the replacement this way is delicate work that requires skill to perform. If you mess one up, you're buying a replacement part. It's a nessasary part that means the gun will be utterly inoperable without it. Fixed and about 2000 BB's later per gun, no jams, loose parts, finish worn down on internal parts, no gas leaks from magazines, etc. With that T8 system factory installed, these guns should last quite a long time.

Function: Very smooth slide, still snappy but without recoiling hard and bouncing the slide back further than it should travel.This is an airsoft pistol clearly meant to be fired fast and accurately, not just kick the crap of you for enjoyment. It's trigger is factory set at a pull weight of around 3 lbs and travels a very short 1/16 of an inch before letting go. The stippled grip was not something I thought I'd like due to realism, but it allows a very good retention and won't tear up your hands without gloves the way a real one can. The RMR plate accepted both the Trijicon pattern and Leupold pattern sight types without problems or mods. Unlike the competor's, both came with a flared mag well, but the C2 grip is a 1/4 inch shorter than a P and had to be removed to better fit my larger hand and within tactical gear. Gas efficiency is decent with a mag and half fired and will perform a mag dump without significant cool down and loss of FPS. It's overall size fits inside the footprint of a G19, with the exception of the length of the grip, which allows your pinky to still be on it, unlike the 19 if you have bigger hands. The P fits within a G17, but with a 1/4 shorter grip and no removal of the mag well. A P's magazine will fit in a C2 grip, but a C2 magazine won't in a P grip due to its shorter length. Golden Eagle HI-CAPA mags fit and function well.

Pros:

Cost. You're getting a better pistol for cheaper than the competing brand, both in looks and in features. The T8 upgrades are around $70 just for the individual parts alone. Flared magwells are included as well as the factory included CNC machined slide. I'd fully expect this to be in the $220 MSRP range.

Accuracy and speed: The gun appears purpose built for this and just that. This is an easy gun to empty it's magazine on, but still hit your targets. OOTB, my more expensive guns can't match the performance levels without more expensive upgrades.

Looks: Rivals the real steel gun. Unless you know what you're looking for, these are hard to tell apart from the real steel.

Cons.

That slide catch/release. Glad I could fix them using time and skill. Still appears that AA needs QC work or more likely, a different one piece design.

Stipped grip can be a con or pro. The more realistic grip tape replacement version is available but more than 1/3rd the cost of this gun. On the flip side, it's a very nice factory grip for feel and retention.

Overall: A gem for it's money. Worth the trouble, just all around the clearer choice for its cost, looks, accuracy and reliability.

"The pistol was amazing overall, great grip and handling. After putting in a new inner barrel and bucking it shot amazing. My only flaw is that both of my magazines (one that I purchased and one that came with) leaked green gas from the gun. I tried it on hpa and it was fine so it is not the gun. Overall 4 stars, for a great gun just a frustrating thing with the magazines.