Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

Avengers Polymer Magazine for M4/M16 Series Airsoft AEG Rifles (Color: Translucent Green / 370rd Flash Mag)

19 Customer Reviews

by Reece M. on 06/07/2023
"Exceptionally good magazines. Not that much more to be said. Would for sure recommend to anyone.

Pros-
-Feed well
-Look amazing
-Feel good and sturdy
-Durable
-Nice and noticeable click when you insert in in your gun
-Stays in the gun and doesn't wiggle out
-Literally pretty much everything
-Consistently leaves only 1 bb left after you can't shoot anymore (pro or con)

Cons-
-Only con is that on some guns it might wiggle slightly
by Nick G. on 02/25/2023
"bought a flash mag by accident, decided to throw it at a concrete floor multiple times, did not break, so theyre very durable
by Anthony B. on 01/16/2022
"I wish they gave a 4 and a half option but they didn’t so. Anyways this is probably one of the best mags I’ve used for the price. They feed well haven’t any issues with loading either. My one and only issue is that it’s a bit wobbly in my gun, nothing a little electrical tape couldn’t fix. Overall a very good mag, I do recommend this mag.
by Austin C. on 12/16/2021
"It is a good mag it works for my hk416 and I bought the last grey 370 flash mag today lol
by Shrey P. on 09/29/2021
"What is it? : M4 Magazine, I bought the Grey and Black Midcaps

Pros :
Look sick
Feed amazing in 25+ RPS guns
Durable, I've dropped them on dirt, rocks, concrete and they refuse to die.
Really cheap for good midcaps

Cons :
May not feed in super high-end guns cause of low tolerances
Wiggles in my mag well a bit but never fall out or miss feeds
Doesn't always feed last 6-7 bbs but that's not a big deal

overall if you have a mid tier gun around 200-300 bucks these should work. Perfect for loaner mags or even to just stockpile up. Love these things, thinking about painting mine purple soon.
by Napa S. on 05/21/2021
"Love this magazine already
First impression is they look exactly like my Magpul magazine on my real steel
But also the fitment is really good better than my PTS magazines and it fed flawlessly over all great buy ! Will order some more soon to replace all my PTS mags
by Shrey P. on 05/02/2021
"Amazing looking and performing. Feeds rounds flawlessly with my AEG shooting around 22rps. I drop them in dust and dirt to speed reload and they work perfectly as long as you take care of them after. The only "downside" is every bb feeds besides the very last single bb which is not an issue at all. They are sturdy, feed, look sick, and have multiple colors. what more could you need? Im buying 3 more
by Cody T. on 04/24/2021
"Avengers Company, these guys definitely make quality m4/m16 series mags. These polymer mid-cap mags feed rounds very well, no mis-feed so far. And so far fits perfectly tight and does not wobble ( I can say the same for the interlocking translucent m4/m16 clips as well). Overall fantastically quality mags!
by Taylor W. on 03/03/2021
"I have eight of these in FDE/tan, and now I'm looking to pick some transparent ones up as well since they've worked very well for me thus far.

I've bought a lot of different mags at this point, each replica is gonna be a little different in terms of tolerances so its good to have several different magazines on hand to make sure you find out which ones are best compatible with your AEG. Luckily for me these have worked great with all my guns!

The GOOD:

-They fill to capacity and are not finicky (closer to 160 in my experience but I still download a little for optimum reliability).

-Worked with multiple AEGs from multiple different brands.

-The clear window located on the top between the feed-lips can help you identify fully loaded mags or when it's below 2/3 capacity (if you can see BB's there is a minimum of 100 left in the mag).

-They mimic the actual size (and look) of a PMAG which is awesome! Personally I dislike when mags are shorter in length as to look 1:1 with real steel *when loaded* in the replica. They tend to get swallowed up by magazine pouches and become difficult to grab when too short. By keeping them 1:1 with real steel magazines they become much easier to manipulate and fill up the pouches they were intended to be used with, who cares if they stick out an extra inch when loaded!

The BAD:

My only complaint so far is the polymer used to make the body and baseplate's seems a little brittle. I was able to crack both the lower body and a baseplate when tossing one to a teammate during a heated game. Yes it took a good smack so I don't foresee this happening from normal use and chest height drops during speed reloads but it's something to watch out for. I repaired mine with some Loctite brand super glue and a few wraps of electrical tape and it's working 100% (heck it worked while broke, it was just cosmetic outer shell damage).

I'd LOVE to see some aftermarket baseplates for these that mimic ranger plates to increase durability under impact.

OVERALL I'd say BUY. They're pretty cheap and work great! Just don't act like their real PMAGs and you'll likely be alright!
by evan b. on 01/21/2021
"its a great mag i did not know how to put the bbs in at first it feeds great and all around is a very well made mag
by Murat K. on 11/13/2020
"This is an outstanding mag. It feeds flawlessly . My CYMA QBS M4 Platinum loves it. It shoots 28 rps , not a single misfeed , not a single double feed. Get it. Its perfect.
by john t. on 09/18/2020
"I bought three of these for my Helios Umbrella Corporation M4 and they work excellently. So crisp when changing mags. These mags also look exactly like the one that came with my gun. Just a bit shorter.

Pros:

Good quality construction. They'll most likely take a bit of a beating.

The witness window on the top of the mag is clearly see through (I have the all black mags).

Never had a miss feed till the last few bbs, but that's expected.

Cons:

The last few bbs don't feed. You're getting more like 140 bbs instead of 150.

Not to shabby I've gotta say!
by Alexander A. on 12/14/2019
"Probably the best magazine you can buy for the money. Fits and feeds great in my KWA T6. Plastic quality is EXCELLENT, feels like a real PMAG. dot matrix for identification. So much better looking, feeling and feeding than the King Arms TMAGs.

PROS:
Excellent quality
Look and feel like real PMAGs
Requires no modification to fit in KWA magwells
Feed perfectly
Dot matrix
Good weight, I would feel comfortable throwing these

CONS:
No extended follower
CANNOT fit magpul ranger plates
by MobileSuitAirsoft !. on 12/02/2019
"Pretty Solid for the price and for it being a PMAG clone. Feeds well and gets the job done for what I need it to out of a Midcap Mag. Also I love the see through to see how many bbs I have left in the mag.
I say the quality is on Par for polymer midcaps and seems to be dutiable feeling with using it. I’m pretty sure it’ll withstand a few drops but nothing to crazy I assume from my use.

Also check out my channel on YouTube for more reviews on this mag and others. YouTube @ MobileSuitAirsoft!
by Jessie W. on 01/26/2024
"good and bad. in my experience, it is quite good

pros:
- looks sick inside my cybergun colt sportsline M4 Block 3.
- sturdy, wont break easy, and a translucent top makes over-loading not possible.

cons:
- doesnt feed too well in my sportsline Block 3, will fire around 10 BBs then wont fire 1 bb, then alternates between firing, and not firing a BB.