Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 9am-5pm PST
Browse by Type or Category
FREE SHIPPING for orders over $99! New deals released hourly and daily. See Deals Here!

Matrix Airsoft Mock Suppressor / Barrel Extension - 30 X 180mm (Style: Don't Tread On Me / Black)

19 Customer Reviews

by Brandon White, J. on 05/20/2020
"Picked this up for $20 during an Epic Deals sale. Fits any gun with 14mm+ or - threads, just flip it over and try the other side if it isn't threading. Perfect for concealing extended aftermarket inner barrels and even functions as an amplifier somewhat, giving the puff of air a distinct popping noise which is louder if you remove the front end. By far the best bang-for-buck mock silencer available, this is overall a fantastic purchase for the money and I highly recommend it.

Pros:
Tough
High quality finish
Both /- threads
Modulates firing sound
Covers extended barrels perfectly

Cons:
Threaded caps may stick and come unscrewed
May be too wide for some rail systems
by Dominic F. on 07/30/2016
"Cool looking, light weight, fun. One side is CCW and another CW, aka 14mm negative and positive. Good paint job and won't wear off easy. It is about 6 inches long and if you want it for a barrel extension it will work great. Also, it doesn't hinder accuracy if you have it on the end of an un-upgraded gun.
by valentino e. on 12/31/2015
"I love this silencer it's a must buy!!

Pros: light weight
Strong
If the front end is unscrewed it has and amplifier ability
Increases accuracy
Nice decal
Makes a gun look cool especially if your going for a direct look or even a cqb look
Cons:
None unless you just don't like it.


This helps if you hate the gear soundme sound they make when turning, pair this with a lipo and your gun will sound awsome.
5/5
by Thomas R. on 11/09/2015
"Great barrel extension. Feels solid, looks great, and allows you to have a longer inner barrel.

Pros:
Looks great on my UTG MK96
Allows me to use a longer inner barrel
Looks intimidating
After some adjusting it doesn't wobble
Special forces logo looks awesome

Cons:
Wobbled a little bit, but as long as it is in the right place on the threads it doesn't move and feels solid.
^This will most likely not be a problem with AEGs but since I have an adapter for my MK96 it causes slight wobble. Gluing the adapter onto the gun might fix this.
Looks a TINY bit small for a sniper rifle
by Thomas R. on 11/09/2015
"Great barrel extension. Feels solid, looks great, and allows you to have a longer inner barrel.

Pros:
Looks great on my UTG MK96
Allows me to use a longer inner barrel
Looks intimidating
After some adjusting it doesn't wobble
Special forces logo looks awesome

Cons:
Wobbled a little bit, but as long as it is in the right place on the threads it doesn't move and feels solid.
^This will most likely not be a problem with AEGs but since I have an adapter for my MK96 it causes slight wobble. Gluing the adapter onto the gun might fix this.
Looks a TINY bit small for a sniper rifle
by Thomas R. on 11/09/2015
"Great barrel extension. Feels solid, looks great, and allows you to have a longer inner barrel.

Pros:
Looks great on my UTG MK96
Allows me to use a longer inner barrel
Looks intimidating
After some adjusting it doesn't wobble
Special forces logo looks awesome

Cons:
Wobbled a little bit, but as long as it is in the right place on the threads it doesn't move and feels solid.
^This will most likely not be a problem with AEGs but since I have an adapter for my MK96 it causes slight wobble. Gluing the adapter onto the gun might fix this.
Looks a TINY bit small for a sniper rifle
by Andy G. on 11/09/2015
"Ok this is a fantastic silencer if you have maybe mutiple guns and you happen to have different direction threads. Take it off one put it on the other. Since it's both clockwise and counter clockwise no worriers. Looks great. The metal is really high quality and the logo looks great. I highly recommend. Only drawback is the price but if you're looking for the silencer to make your AEG look good and feel good I suggest this one.
by Andy G. on 11/09/2015
"Ok this is a fantastic silencer if you have maybe mutiple guns and you happen to have different direction threads. Take it off one put it on the other. Since it's both clockwise and counter clockwise no worriers. Looks great. The metal is really high quality and the logo looks great. I highly recommend. Only drawback is the price but if you're looking for the silencer to make your AEG look good and feel good I suggest this one.
by Andy G. on 11/09/2015
"Ok this is a fantastic silencer if you have maybe mutiple guns and you happen to have different direction threads. Take it off one put it on the other. Since it's both clockwise and counter clockwise no worriers. Looks great. The metal is really high quality and the logo looks great. I highly recommend. Only drawback is the price but if you're looking for the silencer to make your AEG look good and feel good I suggest this one.
by Thomas A. on 03/08/2015
"Bought this to cover up my barrel that I was putting on my gun. It looks good and fit like it should. I did put some pipe insulation in it to hold my inner barrel so it would not be able to move around. I love it and it looks very good on my gun. It is also cheaper and less work than buying and installing a longer outer barrel.
by carlos v. on 12/23/2014
"People think "silencers" for airsoft guns are a waste of money, but after I bought this its letting me upgrade my inner barrel from 407mm to 570mm (580mm outer barrel with silencer)
Its cheaper than replacing an entire outer barrel and also looks badass.

Double sided screws and its solid since instead of just being a single layer of metal thats closed at the end, the entire length of it is metal in line with the holes.
by Kristian P. on 11/26/2013
"This is a really awesome mock silencer. It covers up my longer inner barrel on my M4 and makes the gun look really good especially with the laser engraving on it. I would definately recommend this mock silencer to anyone who wants to cover up an inner barrel or make their gun look cooler.
by Brian M. on 11/29/2012
"i got this supressor 4 days ago and it is great. solid metal with a nice non-shine metalic finish. incredibaly sturdy and the width in the inside is very narrow so if you were conserned about your inner barrel bouncing around it wont. one side is positive threads and the other side has negative threads so you dont need a connector. its light weight and all aluminum. it itself isnt too wide so its easy to take places. it sounds cooler and it acctually does supress the sound depending on how long your inner barrel is. this was a great buy and deffinitly worth every penny. love this supressor.
by Christopher O. on 03/13/2012
"I bought this basically just to look sweet on my WE G36E sniper. And it does.

Pros:
- removable caps with both 14mm CW and CCW threads, so you can change the direction the design faces
- nice finish, but can scratch
- nice trademarks
- Zombie
- great for barrel extension

Cons:
- not a silencer, but merely a tube -- no functionality whatsoever, except for covering an extended barrel
- finish can scratch -- so handle with care (like a baby) ;-)
by Patrick S. on 08/06/2011
"I bought this for my ICS SIG 552 and it looks mighty sexy! It has a nice matt black finish and the trademarks and zombie head are really nice! All in all its just a silencer but it's definatly worth the money if your looking for a really nice, sleek silencer for your airsoft gun.

Pros:

-Nice Matt Black Finish
-Nice Trademarks
-CW on one end and CCW on the other
-Relatively inexpensive


Cons:

-When you put the silencer on CCW, when it starts to get tight, part of the silencer starts so un-screw for I epoxy glued the silencer parts so it wouldn't un-screw.