Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

VFC Quick Response System (QRS) Stock for M4 / M16 / AR15 Style Airsoft Rifles (Color: Tan)

11 Customer Reviews

by Joel B. on 08/11/2017
"Got this to round out a custom gun build. Overall, this is a pretty nice stock. Fits pretty snug on a G&G buffer tube, but nut impossible to move. If you have a G&P buffer tube, forget it. It would take a lot of modification to get it to fit. The multiple battery compartments are pretty nice. Should be able to fit most crane type batteries, and MEBBE some small brick types, but I'm not sure.
by Joe N. on 01/26/2017
"This stock is one of the coolest looking for any M4 platform, in my opinion. It is nice to have a slightly modular stock, because the cheek rests can be removed. I run this on my Tippmann M4 with no problems, although it is a bit tight.
by Christopher A. on 02/09/2016
"Put on G&G M4, tighter fit than orriginal crane stock, extra space for my mosfet. Solid construction, a little tough to adjust, but probably just need to be broken in a bit. Butt-plate isn't rubberized, don't see anyway of adding one either

pros:
-Tight fit, eliminates wobble some crane stocks have
-extra space for mosfet, or other battery storage/small tools/ect
-removable AEG/CR123A side storage tubes for quick battery swaps
- Farley solid
-under-stock rail, for rear mono-pod, great for you DMRs :)

Cons:
-Butt-plate isn't rubberized, and thus far, I see no way of adding one, accept for maybe replacing the butt-plate in general (also the battery compartment door, not sure if there are after market options that allow that.)
by Justin B. on 04/30/2018
"Good stock, but be careful about fit. Your buffer tube or the interior of the stock may need to be sanded a bit to get a good fit.
by Kris C. on 09/28/2017
"I bought this because it looked like it had a lot of space to put batteries in.
Fits Nihm batteries perfectly fine in the side slots BUT it will not fir the Flame Lipo in them (which is why I bought it.) The good news is though, it will barely squeeze the Flame Lipo if you but the larger portion down the tube and the smaller bit in the back storage section. (Effectively.. if you had to you wanted to keep a back up Nihm in the side tubes if the battery was to die so it would be a quick switch)

It was a bit tight on the buffer tube and took some work to make it actually work on it (Went through like 5 tubes on hand to get one that fit it the best) This was my only issue as I know most players dont have a ton of extra parts.
by Davon B. on 08/04/2016
"Great stock. Very Modular, feels high quality, and pretty comfortable despite not having a rubber buttpad. Designed to fit larger batteries most crane stocks may not, but still may not fit a 9.6v brick battery if thats what you have.

It didnt fit my ICS M4 initially, only after an hour of dremel and cursing was I able to get it on the buffer tube and even then it fits so tightly, that it is basically a semi-fixed stock. My rating would be higher if I didnt need to modify it to fit my gun, but still a great stock... just try to make sure it'll fit your gun beforehand.
by Calvin H. on 10/16/2021
"Overall it is ok, tried this with my krytac alpha crb and it was incredibly tight, it would not fit on the buffer tube. You will have to sand it down in order to fit. I originally got this because I thought it could hold 11.1v butterfly (2000 mah) but nope the battery is too fat for the side tubes. So learn from my mistakes and keep those things in mind.
by Joshua H. on 12/21/2017
"I'm really trying not to be unfair about the rating of this stock, but this stock is extremely tight! Using it on my rifles the buffer tube is quite large and fits in REALLY snug. Also the compartment in the back of the stock is quite small even though it says large.. It probably is used with smaller batteries than my Butterfly battery. Now with that being said, They have little tubes on the sides of the stock that look to fit a Butterfly like mine. So I took my battery and put it in the tubes and it wasen't that great of a fit. They ended up kind of stuck it was so tight, I was scared I was going to rip my battery wires out of it with that being the only option of pulling it out. Which I was able to without destroying it xD Now if you're willing to modify it by sanding it and making it fit, that's great! in my case I'm going to send it back and get a different stock :) It probably will work with your gun and battery, it just doesn't in my case. Hope yall find this review helpful! 3/5
by Nathan D. on 05/24/2017
"Great looking stock, with a nice multiple compartments for batteries.

BUT, Is super tight on alot of buffer tubes and will require some sanding/dremeling to get it to fit and slide on the tube. As is you will need to deadlift this stock off of the gun after putting it on.
by Merrick A. on 08/10/2016
"Well I received this product and was very impressed with the quality for the price. It felt very sturdy and looked very aggressive in my opinion, but I had a problem with making it fit on to my buffer tube. It was way to tight. I couldn't get it on all the way. It was very well built but had just to small of an opening to fit.
by Ethan B. on 03/30/2016
"I wasn't very pleased with this on my vfc hk m27 iar. There is a fair amount of wobble. I have a headset that I run with my helmet and the loop on the top of it gets in the way and I can't look down my scope. Kind of disappointed with how cheap it feels and how much it cost.