(626) 286-0360
Airsoft
Fishing
Air Gun
ARES 140rd Translucent M4 Mid-Cap Magazine for AEG Rifles (Package: Single Mag)
10 Customer Reviews
by Justin S. on 07/31/2021
"Extremely good mags for the price point, would 100% recommend
by alex j j. on 04/04/2021
"Got them last month, and I have tested them to see if the fit in all my m4 platforms. They do, it is a bit tight for the CA. I like that because there is no rattle from the mag being loose in the mag well.
by allen o. on 12/18/2020
"These mags are excellent. The plastic feels pretty hard and it doesn't creak when your squeeze it.
Fits and feeds well in my Tavor Elite. I tried it in a g&g combat machine and it wouldn't feed unless I pushed up on the mag so I do not recommend these for that. Also tried it in a g36 with magazine adapter and it worked until I took it to the field. Then bbs were jamming up... So this is a no-go for that either. Otherwise, you can clearly see the remaining bbs even in low light conditions from nearly all angles.
Fits and feeds well in my Tavor Elite. I tried it in a g&g combat machine and it wouldn't feed unless I pushed up on the mag so I do not recommend these for that. Also tried it in a g36 with magazine adapter and it worked until I took it to the field. Then bbs were jamming up... So this is a no-go for that either. Otherwise, you can clearly see the remaining bbs even in low light conditions from nearly all angles.
by MICHAEL W. on 04/25/2020
"They fit and feed inside my cybergun fn m249 minimi. So I'm happy lol. Also fit and feed inside of my modded g&g and modded valken alloy.
by Stephen S. on 04/09/2020
"These mags are great. The feed elite force .32g bbs flawlessly in my Classic Army scarab. The are also very light but durable. Will definitely be buying more.
by owen S. on 03/11/2020
"Great Mags
feed perfect
cheap
work well
feed perfect
cheap
work well
by Stephen S. on 10/23/2019
"Mags worked well with:
- KWA VM4 T6
- Primary Airsoft Hicapa Adapter
- Primary Airsoft MP7 Adapter
I am so glad I bought these mags! During a game sometimes you get lost in how much BBs you still have left. With the BB markings on the mags, you know exactly when you need to reload. The BB count markings are accurate.
These mags are great to the point that you SHOULD NOT leave these lying on the ground during a game. I made the mistake of leaving a mag on the ground just for 30 seconds and when I went back to respawn the mag was gone. Luckily I saw who took it and got it back
TL/DR - Mags are great, get them!
- KWA VM4 T6
- Primary Airsoft Hicapa Adapter
- Primary Airsoft MP7 Adapter
I am so glad I bought these mags! During a game sometimes you get lost in how much BBs you still have left. With the BB markings on the mags, you know exactly when you need to reload. The BB count markings are accurate.
These mags are great to the point that you SHOULD NOT leave these lying on the ground during a game. I made the mistake of leaving a mag on the ground just for 30 seconds and when I went back to respawn the mag was gone. Luckily I saw who took it and got it back
TL/DR - Mags are great, get them!
by Kyle F. on 05/01/2022
"Overall these magazines have been a great addition for airsofting. Love the translucent nature of the magazines, where I can just can't the rifle a little and take a glance at the magazine and instantly gauge the amount of BBs I have left in the magazine. Construction is sturdy enough, and have had them drop to concrete flooring a couple times and they've held up. One however has had a couple of hiccups, and have some issues with feeding when under 20 BBs left, but I've marked it and just continued to make mental note of issues that arise with that one. Four out of five then.
by Aidan D. on 03/15/2021
"Good mags Just don't over load
i broke 2 of them trying to get an extra bb in
i broke 2 of them trying to get an extra bb in
by Steven T. on 04/19/2021
"The Good:
I can confirm that this magazine fits the EMG SAI GRY and EMG Daniel Defense, both G&P OEM AEGs. I can also confirm that it can feed at 25RPS. If you can get them during Evike’s epic deals, you can snag each mag for just over 6 dollars a pop, or just under 8 dollars each when not on sale at the time of this writing (2021). The clear material is slightly darker than visualized in the pictures, but you can get a general idea of how much bbs you have left in sunlight. If you’re playing in low light conditions, it may be an issue.
The Bad:
When the magazine works, it works beautifully. It is a great budget alternative to the PTS EPM1 (which cost 4 to 5 times these). However the problem is nearly 1/5 of them are faulty. I had purchased 3 sets of 5, therefore 15 magazine in total, of those 3 has feeding issues. I took the time to label each of them, and remove said label whenever they caused a feeding issue. I have since went back to investigate them at the workbench. I’ve been able to reproduce the problem by stressing the magazine with increase rate of fire. For whatever reason, when this occurs, the magazine seizes up and stop feeding correctly. They can still push bbs out if you pull the stopper tab to the side (to mimic being inside an AEG magwell), However it does not provide sufficient spring pressure to allow for correctly bb cycling. Unfortunately I cant open them up to investigate the problem without breaking the shell. They appear to be locked/glued internally (found no way to open it into halfshells to see if there are burrs or debris causing the fault)
I can confirm that this magazine fits the EMG SAI GRY and EMG Daniel Defense, both G&P OEM AEGs. I can also confirm that it can feed at 25RPS. If you can get them during Evike’s epic deals, you can snag each mag for just over 6 dollars a pop, or just under 8 dollars each when not on sale at the time of this writing (2021). The clear material is slightly darker than visualized in the pictures, but you can get a general idea of how much bbs you have left in sunlight. If you’re playing in low light conditions, it may be an issue.
The Bad:
When the magazine works, it works beautifully. It is a great budget alternative to the PTS EPM1 (which cost 4 to 5 times these). However the problem is nearly 1/5 of them are faulty. I had purchased 3 sets of 5, therefore 15 magazine in total, of those 3 has feeding issues. I took the time to label each of them, and remove said label whenever they caused a feeding issue. I have since went back to investigate them at the workbench. I’ve been able to reproduce the problem by stressing the magazine with increase rate of fire. For whatever reason, when this occurs, the magazine seizes up and stop feeding correctly. They can still push bbs out if you pull the stopper tab to the side (to mimic being inside an AEG magwell), However it does not provide sufficient spring pressure to allow for correctly bb cycling. Unfortunately I cant open them up to investigate the problem without breaking the shell. They appear to be locked/glued internally (found no way to open it into halfshells to see if there are burrs or debris causing the fault)