Action Army T11 Airsoft Bolt Action Sniper Rifle (Model: Pistol Length)

"I wrote a review back in March prior to upgrades. The only upgrades I did was the barrel (upgraded to Action Army 6.01) and spring (upgraded to Action Army M150, could have chosen a M170, but wasn’t necessary since I’m mostly involved in mid-range shoot outs in thicker woods.)
My first post I made mention of having problems with the bolt; this was solved when I took the gun apart, I found that tiny shavings were inside the cylinder and causing the release/lock to be affected. No problems after cleaning it up!
-All internals were metal! Including the spring guide and piston (metal piston but not the after market Action Army piston, but still good).
-Stock spring is probably M130.
After upgrades listed prior, and using .40 G&G BBs, I have it set up where I am hitting a milk jug at 60 yards, and a Target at 70yards. It can shoot farther, but the terrain I play on, the engagements don’t really happen past that. It is very consistent, and hold its air seal well.
I highly recommend this product.
It shoots currently at 392FPSw/.40gram BBs.

"I am brand new to airsoft. I played a lot of woods-ball paintball back in the day, and wanted to get into airsoft, so I bought the T11 long version because it was affordable and heard it did NOT need upgrades out of the box. I played 1 larger wooded terrain event and 1 smaller wooded-almost CQB style field, so my analysis is going to be limited:
I love the look and feel of the gun. I sighted it in with .28G&G and consistently hitting a milk jug at 150ft, BUT much further and my BBs were dropping, and adding more hop-up made them very inaccurate….so with that said, maybe heavier BBs may be the solution?? I did purchase upgrades so I won’t be able to further review the gun in stock form after this. The bolt after a while would not always catch and BBs would roll out (this may be user error though being that it’s possible I was pulling the bolt back at too much of an angle to the left…I found that if I just barely clear the safety switch while cocking back and forth I don’t have the issue anymore…so again it could be user error, or I just happen to crank it too hard at an angle one time and messed something up…who knows, and if any knows how to fix the problem I created, helpful tips would be nice.)
Overall I really like the gun, and have really enjoyed airsoft so far. I would still enjoy the gun in stock form, but I had the opportunity to purchase some upgrades, so I did, but yes it is good out the box.

"I got this gun used and was skeptical at first but it's now my favorite rifle. Very easy to setup and adjust mid-game. Shoots very well with .28 bbs and the few times I used .20 it was just fine too. Only problem I've ever had was in extreme cold the bucking would occasionally stop a bb, but that's to be expected.

"Great base for a futuristic looking VSR that won't break the bank. The trigger unit is probably the weakest part of the rifle with stop made of aluminum. Fortunately Evike sells a replacement that i would highly recommend you pick up. The cylinder and cooking handle are both excellent quality along with the bull outer barrel. The hopup unit is a lot nicer than most stock VSR hopups but I would recommend look to install a TDC mod to get the lost out of it. You may need to Teflon tape wrap your cylinder head as mine had poor compression out of the box only showing around 320 fps on .20s.

Overall you are getting a good deal of value in this VSR especially with the bull outer barrel, cylinder, rail, and hopup.

"Great sniper right out of the box. It shoots about 400 fps with .20g BBs and can hop .43s stock, albeit at the max hop setting. This is a no brainer for $220 if you want to start sniping.