LCT Airsoft Z Series ZB-10M Tactical Railed Handguard for AK AEG / GBB Rifles

"This is one solid lower AK handguard for those looking for one that nicely railed and built like a tank. I purchased this for a CYMA AK74 project and it did require some slight sanding and utilizing my Dremel tool to fit into the lower portion. Once that was completed, it fit so snuggly and tight you swore it was made just for it. Looks absolutely amazing once installed and is definitely both practical and appealing.

Pros:
- Solid metal construction
- Plenty of rail space to work with
- Includes adapter plates for both AEG and GBB builds
- Not extremely heavy despite it being metal

Cons:
- Requires modifications to fit CYMA brand AK's due to slight clearance issues.

"I got this for my lct akm, and i think this was a great buy. I had to file the plate down a little bit, but after i did that it fit snug as a bug! There is literally no wobble and it feels pretty solid. 9/10 would recommend. (just make sure you have a file or something u might need it)

"Requires a bit of filing to fit E&L gen 2 essentials but once you get it in, it feels super solid, adds a little bit of heft but not too bad. Gives a mid wipe tarkov vibe

"Disclaimer: I did not purchase my ZB-10M handguard from Evike, but you definitely should buy yours from Evike when it's in stock!

I cannot be happier with this handguard. The construction is amazing, there is literally no wobble whatsoever. I installed this on my GHK GK105 and it fit perfectly (which means it will fit just as perfectly on an LCT AEG). It's a tight fit so you will need to hammer it down into the receiver, just like the real Zenitco B-10M. My handguard came with full Zenit trades, but I'm not sure if the one listed here will come with them. Overall, I'd recommend the LCT Z-Series parts for anyone that wants top-quality Zenit style parts for their AK.

Pros:
Amazing build construction
Accurate ZenitCo trades (on the one I purchased from another retailer)
No wobble whatsoever

Cons:
Absolutely none. This handguard is worth every penny.

I will definitely be buying more LCT Z-Series parts for my AK

"When I ordered this, I was skeptical since it was an LCT and I had a CYMA CM040C, the Ak-74, but it fits without any modification, at first I thought it didn't because of the front retaining plate for the handguard, but after some research, the real zenitco B-10 requires you to hammer the plate into the handguard, as it is a tight fit. With the help of my trusty pliers and hammer It slid in, and I was able to pull the little lever down to secure the handguard.

Pros
- Well built
- Affordable
- Rails offer attachment options for your Ak

Cons
- Can be a bit challenging to install, retaining plate fools you, and you may think the handguard won't fit, just try hammering it in
- According to others, for some CYMAs, requires modification

"I will preface my review with that I did not buy mine from Evike, and I will not state where I purchased mine from. I am leaving this review to answer any questions like I had when deciding to buy this product.

I purchased this hand-guard for my CYMA CM048. The overall build quality, all aluminum, and paint, unknown if powder coated or similar, is very good for the money. It was not a drop in fit for CYMA. I did have to file the front of the hand-guard about a quarter inch for it to fit in the lock on the AK, but after that it went in fine. No wobbling and great fit even after modification. No issues since.

Pros:
-Great build quality
-Looks great after being installed
-Greater range of options to run the AK

Cons:
-Having to modify to fit (however I do understand that this was built for LCT AK's)

"Very tight fitting in my LCT 105, no wobble. Had to use a dead blow hammer to fit it properly. but it locks in very secure. Very light weight option to an already front heavy rifle.

"Doesn't work with CYMA AK105. (CM040D), Specifically, The part where the Handguard slots into the sling loop is WAY too thick. Lots of sanding/filing will be needed to fit it properly. Aside from that, It feels sturdy. Pretty hefty in weight, And interfaces with ZB19 well.

"Great handguard. The trades look awesome. Extremely secure and wont budge a millimeter after installation.

Does not fit an E&L AK 74M gen. 2 without serious modification. Using my Dremel tool I had to slice off about a 1/4" long section at the very end of the handguard so that the securing clasp on the barrel would hold the handguard in place. I also had to file down the section where the handguard slides into the lower receiver a lot and use a mallet to smash it into place. Obviously this was made for LCT AK's so I can't complain. But I think evike should update the product description to inform the customer this handguard won't fit an E&L AK without serious modification. I was able to get the handguard to fit without harming any part of my gun itself.

"Only used this on my LCT AK-74MN once, can only confirm it's fitment on LCT and GHK rifles. Fits my RK-6 grip just fine and is built well. Biggest problem and why I am knocking it down a star is that it's fitment sucks. In order to fit it onto my rifle I had to line the retainer with the handguard and hammer the retainer and the handguard into the socket with a driver into it, and honestly? I don't think I could get the handguard out of there now, but I don't think I'd want to. Will also fit a B-19, B-22, B-19 and a B-33 if needed. Obviously heavier then the wood or polymer counterpart, but that's to be expected. Once it's on, it's on and ready to use! Awesome job LCT!