ARES AMAG 130rd Mid-Cap Magazine for M4 Airsoft AEG Rifles (Color: Dark Earth / 5 Pack)

"Best mags I have ran with for the last 3 years not a single problem and I use them every game!

"Got the 5pk in April 2020. I ran feeding tests on my Krytac Alpha CRB. They all fed on semi and full auto. I have a different mag release, so the AMAGs lock in place quite well. Overall, I would recommend these.

Note: I haven't tested with the stock mag release, so I can't say if these are 100% compatible, but they work with my CRB.

"Great product. the mags are a bit long so it could be a problem for people with smaller m4 mags. The mags are supposed to hold 130 bbs but I was able to overload them once I broke the mags in up to 150 bbs. Overall high quality, durable, good at feeding, would recommend.

"Bought a box of 5 to trial out as an alternative to the EPM's that have been out of stock for months now.

Pros:

I've been running these primarily on an upgraded VFC SIG MCX Virtus and they've been able to easily keep up with the ROF (28 RPS) and don't miss a beat throughout the entire magazine. These also work great in the KWA's and G&G's I tested them on.

These are lighter weight than the old PTS P-Mag. I would say they feel approximate in weight to the MAG brand midcaps, but with better quality feeling material.

Cons:

Runs a little on the narrow side, so it may be necessary to shim out your magwell depending on the gun.

It's a bit inexplicable why they didn't design the floorplate to be compatible with Magpul Ranger Pulls. Seems like a major missed opportunity.

The design is not really intended to be serviceable like some mags. You can remove the spring and follower, but the halves appear to be glued together similar to how a MAG brand magazine is constructed.

"Im am super excited to get out on the field with these mags. I have some old pts pmags and I compared them and to my surprise the pts pmags are not full size and these mags are. They are made just like the old pts mags(a one peace design from top to bottom) they definitely are made of a hard polymer and not a cheap plastic. The mags fit right into my vfc mk18 build with a billet retro arms gear box, nice and snug. These mags do not fit into the new vfc 416a5, but they do fit into my limited edition m27 that has the old generation lower receiver surprisingly. Yes buy these mags before they go out of stock for a year.

"I use these is a G&G with the G2 gearbox, and they feed awesome! I wish they just came in singles rather than packs of 5

"They are good quality, very close to the CYMA Platinum mid cap. They feed nice, you can put all bbs on it and won’t jam. Good price, nice quality and looks good.

Fit nice on CYMA Platinum, Aps and Dytac M4’s.

"Got the 5 pack in tan and have feed reliably in my vfc Avalon block 2. They wobble slightly more than the vfc tan steel midcaps I bought as well. 1 out of the 5 mags creaks a little bit when you grip the magazine but it still feeds reliably. It’s also the only that drops out freely from the mag well. Overall great magazines definitely worth the 48$ and I plan on getting the extended magazines as well.

"I got these in December these are pretty decent mags I like them but there’s some things about them that rounded top part of the mag causes it to wiggle too much and it also doesn’t feed the last few bbs which is pretty common with lots of mags but they feed really well and can get through many games but I found that one of the springs in one mag was broken but those are the only bad things about them but if you are looking for this style I’d recommend them

"So first off, the mags look great. They came in a cardboard box that was pretty attractive and that I honestly still use to store these magazines. The polymer looks and feels good, and I am a fan of the detailed trades.
I don't have much funds for magazines, so the one set I buy is the one set I will use for all of my guns and these are the ones I decided upon. Overall? pretty good mags.

Fitment: In ares guns, my am-013 and am-009, they fit decently but have plenty of play to the left and right and very little play back and forth. In an ICS cxp and a Classic Army Scarab they fit in the exact same fashion as the ares gun (possibly even better in the CA.) In a G&G SRXL there is much to be desired though; they latch onto the magazine catch a little over half of the time if you're careful with reloads, and it has lots of play when in.
If you want to use tape to fix play issues, it fill fit fine into the Ares,ICS,and CA but tape will impede it from going into the G&G magwell.

From what I have tested, they feed really well in the Amoeba line and the ICS cxp-- I have not tested the other brands yet.
Like many other mid cap magazines, these will not feed the last four or five BBS of the mag because the BB Follower stops within the magazine and not within the hop-up chamber (unlike other magazines like the G&G mid caps)

"Bought these for my Krytac CRB after reading some reviews claiming they work with Krytacs. Let me start by saying that technically they do "work" but they also do not properly lock in. The slightest bump or shaking and the mag will fall out. This can be fixed by adding a small strip of adhesive Velcro to the inside of your magwell. After that, they do work pretty well, but you won't be able to drop your mags by hitting the mag release, you will need to pull your mag out every.....single....time.

"These have bad feeding problems with umbrella rhops, and they dont fit very well in my krytac, but i cant even add tape because its only f***y on the sides. Wouldve rather bought better mags, even with them on sale.
But thats just for my gun, and the umbrella rhop system. Seems like it requires really good quality magazines

"I got 5 of these mags in black and 5 in tan. Despite being literally the exact same mag the tan mags can be easily pulled out of my EMG MK18 without depressing the mag release, frequently misfeed, and are not suitable for heavy use. The black mags however sit well enough in the magwell, havent misfed yet despite magdumping them each 5 or so times and are well worth it. So, dont buy the tan mags, they will not work, and are a scam. just wait for a restock on the black mags if you want them that bad, lord know i wish i did.

"These mags have no feeding issues and fit in most M4s and M16s, however, they did not last long as the spring was pushing on the polymer and eventually split the mag open in the middle of a game! I would not recommend these as they were not made with strong polymer...

"These are super wack dont waste your money on these !!!