(626) 286-0360
Airsoft
Fishing
Air Gun
TCG
Events
EMG "Autobot" 1400rd LiPo-Powered Automatic Electric Airsoft BB Speed Loader (Color: Black / Add 7.4V LiPo)
38 Customer Reviews
by cody c. on 02/17/2024
"feeds all my mags instantly including my epm1's and the new egms. if the item you buy is smarter then you plz dont review it.
if your using .2 bbs and trying to fill a epm1 up the bb weight isnt enough. use common sense.
honestly think ppl like jon T should have to have a IQ Test to post online............
if your using .2 bbs and trying to fill a epm1 up the bb weight isnt enough. use common sense.
honestly think ppl like jon T should have to have a IQ Test to post online............
by Ethan R. on 09/07/2025
"Lasted me one year to the day exactly. Which kinda funny. But over all definitely going to buy again.
Use a 11.1v lipo 600mah fit into the little hole you get to shove a battery in.
Loaded and fed all kinda of bbs.
What finally broke it is in the feed tray where the motor is there's a lip that the bbs pass to get grabbed by the gear and then go round to feed. Bb got stock and broke the plastic down there and that killed it, then motor when out. Not much you can really do about that, but maybe shake it now and again lol
Overall 4/5
Grab yourself one, cause once you stop using a speed loader and Odin, youll never wanna go back.
Also loads epm1s no problem (old ones)
Use a 11.1v lipo 600mah fit into the little hole you get to shove a battery in.
Loaded and fed all kinda of bbs.
What finally broke it is in the feed tray where the motor is there's a lip that the bbs pass to get grabbed by the gear and then go round to feed. Bb got stock and broke the plastic down there and that killed it, then motor when out. Not much you can really do about that, but maybe shake it now and again lol
Overall 4/5
Grab yourself one, cause once you stop using a speed loader and Odin, youll never wanna go back.
Also loads epm1s no problem (old ones)
by Kyle D. on 03/12/2025
"No issues to the time of writing this review.
I have little complaints about the Autobot. I have never had a feeding issue yet. The only complaint i have is if you push down on a mag too hard you can overload it and break your mag. I broke maybe 4 mags but i learned how to avoid it once i realized. Just don’t push down too hard.
I have little complaints about the Autobot. I have never had a feeding issue yet. The only complaint i have is if you push down on a mag too hard you can overload it and break your mag. I broke maybe 4 mags but i learned how to avoid it once i realized. Just don’t push down too hard.
by K. I. on 12/10/2024
"It's truly a shame that they increased the price, but this product's worth remains quite high. It comes with plenty of adapters to suit your every need, and they even include a nice grippy surface that you can stick on the bottom. I've used these to fill a variety of gas mags, and the only type they've struggled with have been those with particularly tight feed lips (e.g. GHK AUG, Maruyama SCW-9 Pro).
My gripes are few. I experienced a catastrophic jam during the first outing with this loader, but the stoppage was easily remedied that night with some disassembly, patience, and an unjamming rod. It should be noted that I haven't experienced a single jam in the months following. Additionally, there is a distinct lack of batteries that can fit comfortably inside. I use a relatively small 11.1v stick from an AEG I no longer use and it works perfectly, but the loader itself is relegated to staying in staging since the battery is exposed and simply won't fit.
I HIGHLY recommend this over a manual speedloader, especially for gas magazines.
My gripes are few. I experienced a catastrophic jam during the first outing with this loader, but the stoppage was easily remedied that night with some disassembly, patience, and an unjamming rod. It should be noted that I haven't experienced a single jam in the months following. Additionally, there is a distinct lack of batteries that can fit comfortably inside. I use a relatively small 11.1v stick from an AEG I no longer use and it works perfectly, but the loader itself is relegated to staying in staging since the battery is exposed and simply won't fit.
I HIGHLY recommend this over a manual speedloader, especially for gas magazines.
by Don R. on 02/19/2024
"Fortunately for me… it loaded all my epm1’s, I only wished the battery can be stowed internally because it conviniently comes with a power switch and can be turned off…
by Jon T. on 02/15/2024
"This is an awesome little bit of tech. Slightly shorter and a bit more rotund than an Odin.
The Good:
1400r capacity, more or less the same as an Odin.
Pretty fast using an 11.1v
The Nitpick:
I know they said the battery can be run externally, but I can see plenty of space to slot a larger battery internally.
The Bad:
Didn't load an EPM1
The Good:
1400r capacity, more or less the same as an Odin.
Pretty fast using an 11.1v
The Nitpick:
I know they said the battery can be run externally, but I can see plenty of space to slot a larger battery internally.
The Bad:
Didn't load an EPM1
by Luis E. on 07/18/2025
"It was a good speed loader while it lasted. It easily filled most AEG mags. However, it was difficult to load rifle gas mags, like my MWS mags. One of my teammates managed to break the loader’s motor filling one of his KWA MP7 mags. I would highly recommend not to force filling your mags even if they aren’t fully loaded or decrease the spring tension first.
by Jonathan L. on 04/09/2026
"I got this back in September of 2025 it is now April of 2026. I got it with the thought that I would start playing more.
Sadly life hit and I played maybe 4 or 5 times since then. This thing already broke on me.
I used a 11.1 Lipo, And Lancer tactical .30 Gram BB's, loaded original EPM magazines.
About 2 weeks ago, i went airsofting, after 2 games on the field i went to load up my magazines again, It sounded really wierd so i opened the hatch and BBs were not being pushed through, Confused, i pushed the Feeding button down by hand, BBs arnt coming out, I look in the tube and see that a BB is jammed and shattered half way down the Tube. I also notice that all im hearing is the motor, so i look inside the latch while im pressing the button and i dont even see the arm that pushes the BB's Moving.
When this thing worked, made loading magazines a Breeze! But as mentioned and looking online, it broke, and its not a cheap speed loader, with only a 90 day warrantee, i can not get it replaced or fixed.
i 100% didn't get my moneys worth of this loader to even justify buying a new one in the future.
Sadly life hit and I played maybe 4 or 5 times since then. This thing already broke on me.
I used a 11.1 Lipo, And Lancer tactical .30 Gram BB's, loaded original EPM magazines.
About 2 weeks ago, i went airsofting, after 2 games on the field i went to load up my magazines again, It sounded really wierd so i opened the hatch and BBs were not being pushed through, Confused, i pushed the Feeding button down by hand, BBs arnt coming out, I look in the tube and see that a BB is jammed and shattered half way down the Tube. I also notice that all im hearing is the motor, so i look inside the latch while im pressing the button and i dont even see the arm that pushes the BB's Moving.
When this thing worked, made loading magazines a Breeze! But as mentioned and looking online, it broke, and its not a cheap speed loader, with only a 90 day warrantee, i can not get it replaced or fixed.
i 100% didn't get my moneys worth of this loader to even justify buying a new one in the future.