Evike.com BAMF 190rd Polymer Mid-Cap Magazine for M4 / M16 Series Airsoft AEG Rifles (Color: Black / Single Magazine)

"First thing's first, I ordered 3 of these for my Elite Force H&K 416 CQB. They DO NOT fit out of the box without modification.

First Impression:
They're made of plastic but they don't flex too much. Fully assembled they feel fairly solid. They are lightweight but sturdy feeling. Bullet window is cheesy, but does it really matter? Texture is nice and grippy.

Compatibility:
As I stated before they will not fit H&K 416 mag wells without modification. The mag will not catch because the first "knuckle" of the magazine prevents full insertion. I use a soldering iron to melt and reform the plastic in order to accommodate the mag well. Don't file it, you'll end up with a hole in your mag that you'll have to tape up. After that mod, I they fit like well. They wobble a tiny bit, but not a big deal to me.
They fit my KWA KM16BR well because its mag well, like most M16 variants, is slanted up more in the front.

Function:
So far, they feed well. Keeps up with my stock ROF. Plenty of folks can attest to their functionality already.

Pros:
- Very inexpensive (esp. after coupons)
- Higher capacity mid-cap
- Gives you a window you can personalize with colored tape or name tag (See, it's not completely useless!)
- Lightweight
- Feeds well
- The spring is removable without disassembling the entire mag housing

Cons:
- Doesn't fit HK 416's
- Cheesy bullet stickers

Conclusion:
Really good, inexpensive, practical mags. After the mod, I really enjoy them so far. They will serve their purpose even though they aren't going to win any tacticool fashion shows (Go PTS EPM for that). If they fit my gun out of the box, I would give them 5/5.

"Beautiful magazines. Easily the best midcaps I have ever used.

Pros:
-Better than average capacity. ~190 rounds. Most midcaps only hold 120 or 140.
-Light weight. When in full battle rattle, ounces equal pounds and these are not encumbering at all.
-Fits in both my Dboys M16A4 and Lancer M4A1. If they don't fit in your gun, you have two options. A file or electrical tape, depending on why they won't fit.
-Incredibly powerful follower spring. Could easily handle 20 RPS, most likely well over that. I've no need to go Order-66 on people so I can't test tuned Pstars or HPA.

Cons:
-As the general trend in plastic magazines, two will will not fit in double-stack mag pouches due to their tall height and wide baseplates. I knew this while buying, though. Your mag pouch which could normally hold four USGI aluminum type magazines may only hold two of these.
-Relatively smooth surface.

"These mags are durable, they feed well, and are a great option for the price. They fit perfectly in my Krytac CRB with just a little bit of electrical tape. Why four stars? Because maxing the mags out even close to 190 rounds is definitely not a good idea. When at full capacity the spring is under extreme tension and causes double feeding and jamming issues. The solution is to load them to about 140 or maybe 150, but the advertised 190rd is somewhat arguable.

"To start off when I revived them in the mail one of them was chipped at the top (probably in shipping) but it didn't affect the performance anyways the construction is all polymer but it doesn't seem the strongest but it hasn't broke on me either the bullet window in it looks extremely cheesy and I much rather not have it there but when testing them out they fed good and I had no problems only reason I put 4 stars is that one came chipped.

"This mag is worth more than it's retailed for, so for 10 bucks you need to get some.

Pros:
- Cheap!
- Sturdy.
- Feed great.
- Fit MOST M4's, their
are some models that
don't fit.
- Durable

Cons:
- Last few BB's sometimes
do not feed.
- The tan shade is SLIGHTLY off color
- Ranger Plates don't fit, but then again
they were never intended to.
- The fake bullet inserts are GROSS. I recommend
screwing off the base plate, taking the inside out, and
to remove the stickers on either side and just
cover the windows with electric tape from the inside.

"Feeds like a dream in my g&g gr16. High rps capability, as I do believe these mags are rebranded g&p mid caps

"Some mags work really well and fit in pretty snug they feed flawless but some mags when bought in bulk will still feed pretty well but for some reason are really, really wobbly and loose like its 1 cm smaller and will fall out or only stay in place if you hold it... other then that its a good mag

"I bought these mags for my A&K masada, they feed well but are VERY snug, I'd recommend sanding them down before using them

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"Ordered 3 of em and they are great. Tight fit in an echo1 and light weight but perfection in otherwise.

"feeds well,
but the printed picture of 'bullets' on the side,
look more like yellow crayons! ( SERIOUSLY, they look really BAD!)

it has a real nice texture to it,
and good grips though,

but the little nub that pushes the bb's up dose not go up very far,
it's at least a FULL BB's height LOWER then other similar magazines!

But overall, a good magazine for the price,