Maple Leaf Decepticons Hop-Up Bucking for WE-Tech/Tokyo Marui Gas Guns (Type: 75 Degree)

"Really nice bucking, as Maple leaf’s are the best. Installed the 75 degree bucking in my Redfire PPS green gas Kar98k. This bucking worked wonders in it and greatly improved the accuracy and consistency. I don’t have the Kar98k anymore but I have no doubt it’s still slaying at distance with the new owner. 10/10

"I bought this for my JG Bar-10. it fit real nicely with one exception. The default JG Bar-10 needs you to cut off the arc on the back of the barrel for this bucking to fit. Once on, its a nice bucking. The metal clamp holds it really nice and sturdy. I haven't gotten to do a shooting test yet, but I am sure it will do just fine.

"I put this bucking in my WE GP1799 which is basically a G17 internally, which is a clone of Tokyo Marui Glock. Fits perfectly.

Result:
My groupings went from about 5" to about 2.5" at 25'.

Application:
For this pistol setup, you have to use a nub to truly realize the full potential of this bucking. You can use the F-key or I-key by Maple leaf or RA-tech. Or, you can take an exacto knife and cut an old credit card to fit just under the flat portion of the hopup lever. Double up the thickness with layers and superglue and file/sand as needed to get the right shape. Note: the hopup lever arm will lean on the left side a bit more, so you can file the nub to more of a wedge to account for that. After getting the right nub in, the bucking will hug the bb all around the top surface.

"Best upgrade for gas guns hands down. Increased my effective range by 50+ ft and my groupings are about 4x tighter. Had to trim off the side ridge to fit my VFC 416D gen 2.

"I got the 70 degree bucking for my WE hi Capa paired with a guarder hop up unit it and honestly I am amazed! Love these buckings!

"The best bucking I have used.
Even better than an R hop.

"Good hop up bucking, I used it in my TM mk23 and works perfect!

"I just installed this bucking into the VSR10 from WELL everything else is stock and I went from .32 gram bbs to being able to lift .36 gram bbs so it works I was going to install the omega tensioner but the stock hop arm does not position it correctly, that will be for later but the bucking alone did make a difference in the shot to shot consistency.

"I'm a little new to the whole "Up grade everything in your gun" game but I will say. This bucking has done wonders for my hi capa's performance, better efficiency, higher fps, and certainly more accurate. So if you are looking for a fantastic and easy was to improve your accuracy you can't go wrong with this

"Flat out awesome. This was my first internal part upgrade buy and it was worth it. Definitely improves accuracy and range and it seems like it seals better as well.

"Used in: Tokyo Marui VSR-10.

BB's: Elite Force 0.32g Biodegradable.

Amazing bucking, absolutely amazing. I've owned many Maple Leaf buckings and they're all great. The metal ring does in fact support the bucking structurally. Now for performance, accuracy and consistency are through the roof. Targets set at 150 to 175 feet are easily hit and in the same spot. I'm running my Mauri around 400 FPS and this bucking is perfect. Shots are straight as an arrow with near zero cross winds. Highly recommended.