Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Have you seen our newest immersive Airsoft experience? Level Up Live at Evike Alhambra!

Desert Tech SRS-A2 22" Covert Pull Bolt Action Bullpup Sniper Rifle by Silverback Airsoft (Color: Black / Right-Handed)

7 Customer Reviews

by Cameron P. on 08/07/2025
"What a beast of a rifle! This is so far my favorite platform. I had a few VSR builds, and most recently a SSG96 MKII. I liked the ssg96 but being proprietary had limited it’s potential performance.

Anyway out of the box, this gun is incredible. A few small cons, the cylinder is a bit rough and takes a bit of finagle to put it back smoothly. Also the piston sear has a catch that you have to pull over which gives a slight increase when pulling causing another rough pull.
To overcome these issues, I got the stalker piston kit and cylinder. What a difference with just the weighted piston! The consistency is amazing. It seems rediculous to spend another $150 on top of a $800 gun but it’s worth it.

Also SilverBack has another sear that is flatter, providing an even smoother pullback.
by PJ H. on 03/23/2018
"OK I�m not going to tell you what to do But just listen to what I have to say if you were going to get this rifle then please do some research, thinking that the 22 inch would be the best out of the many options this rifle has in barrel lengths I was incorrect I bought a fast hop which works so much better than the original hop up unit the original hop up unit does give you the most accuracy but not the best at range for your rifle I also grabbed M150 Spring to put in this rifle it made the rifle shoot way too hot with the stock inner barrel I know you could buy a wide Bore barrel and lower the FPS just a small amount but still, so then I went and bought the 16 inch barrel along with a prometheus 407mm wide Bore inner barrel and a short hand guard to turn the rifle into the covert version and I cannot be happier Now I do not have the BB doing a weird wide curve when I shoot the rifle now it shoots straight and I can push the BB out beyond its original range with a stock spring hitting targets up to at least 250 or a little more.


Pros
rifle is high-quality.
Replacement parts are easy to get.
Quick change spring.
Customizable.
Compact.
Can compete with the SSG24.
It was featured in the movie John Wick.

Cons
magazine is a little bit of a pain to get out of the mag well.
If you are buying the 22 inch or longer inner barrels are expensive.
When running low on ammo in the mag you have to turn rifle sideways or upside down to load the next round in.
by Brandon F. on 03/16/2018
"So far it seems like a great rifle. I purchased the gen2 as soon as it came out so i wasn't sure what to expect since there were no reviews on the internet. The externals are 1:1 to the real rifle. it looks great and is very sturdy. The price is high yes, but they do not cut corners. The internals are pre-upgraded except for the spring and the barrel is -14mm. Disassembly is very easy as well. it can handle up to m180 with ease, and anything higher there is no need.
by Rui M. on 06/20/2017
"Nice rifle, great quality.
But the mag has feed issue.
This one already upgrade the pull bolt and charging handle.
You do not have to purchase upgrade kit.
Even the PULL Bolt action is strange. I spend a hour to Practice how to charging it smoothly.
by Hiatt F. on 05/02/2017
"This is a great sniper. You can tell straight out of the box that this is a quality product. Every part feels solid and fits together near perfectly. It comes with the orange tip shown in the pictures attached, but they also include the .308 flash hider in the box. The included barrel is brass, but accurate and taped so as to not move. Out of the box mine shot around 420 with .25 bb's, and went down to about 410 after some breaking in. The two point hop-up is great, as is the included bucking. It does require a 1.5mm allen key to adjust, but can be precisely tuned and stays in place. The included rail segments are plastic and attached via bolts, but I have had no problems with them so far. Magazines fit tightly in the magwell, and get smoother over time. The trigger can be moved to your desired position, and the pull itself is light and smooth.

I would not however, recommend this to newer players. It comes mostly disassembled in the box, and while the instructions are very detailed in assembly it might be daunting to some. The bolt assembly must be put together and lubed. It also requires a lot of breaking in (several hundred cycles of the bolt) to be usable while shouldered. Regular cleaning and regreasing is definitely a must, as the bolt is exposed to the outside. The included grease has worked fine for me so far, and there is enough for several applications. Even when broken in, the tail end of the pull can be very difficult, so I would recommend experimenting with different ways to cycle to find one that works for you. Removing mags can be a bit awkward as well, but there are a few ways to do it.

The only issue I've had so far is with two small o-rings in the hop-up. They meshed too tightly with the air nozzle and were broken when I broke in the bolt. They also made it difficult to remove and insert the bolt during cycling. Since removing them, I have had no issues aside from an occasional bb falling backwards.

Overall, this is an amazing sniper built with high quality materials and an appreciation for detail. I would highly recommend this to anyone who wants a unique rifle to add to their collection.

To top it all off, IT'S NOT MAP CONTROLLED.
by Jordan W. on 04/24/2017
"I'm fortunate enough to live right here in SLC, UT where this rifle is made. I've shot the real SRS-A1 and I can tell you that this replica is completely identical to it's real steel counterpart. The lower and upper receivers are incredibly well made and the Desert Tech trademarks are spot on. The gun does need some assembly when you get it out of the box, but it is pretty simple to piece together. The bolt does indeed have the traditional bolt system in place as opposed to the previous SRS models where the spring would be compressed while pushing the bolt forward. The rifle comes with some grease, a magazine, a .308 styled flash hider, 3 attachable rails, and a monopod. My only complaint is the hop-up bucking was ripped before I shot it but that was probably due to a manufacturing defect. All in all, I would give this gun a 10/10. It's solid and it stands out with its good looks.

Pros:
Extremely solid build
Bullpup design makes it compact w/ a long inner barrel
Free .308 flashider
Easy to strip apart and upgrade
Interchangeability with 16", 22", and 26" outer barrels
Light weight (At least I think it's light)

Cons:
The Bolt is a bit stiff (I'm sure it ease up)
The buttplate could use a better locking mechanism
by William B. on 09/22/2021
"I can't tell you how let down I am about this product. It should come out the box shooting laser beams for the price. The stock hop-up is tricky and you have to dump a bunch of ammunition just to get it hopped correctly. I never was able to quite dial it in before I gave up. Some people have said it's actually quite good once you get it but good luck on that. So then I had to go purchase an aftermarket hop-up unit and I feel like I shouldn't have to spend one extra dime for the price of this thing. I will say it's very sturdy and a beast of a gun but I wish I would've went with a different brand that gives me high performance out of the box at a better price.