"Out of the box, this thing seemed pretty nice. It had a good weight to it, and it was fairly accurate. It comes with instructions on how to adjust the trajectory of the bb as well as a little tool you can use for that. Keep that tool because the other hexagon wrenches that I had that were supposed to be 1.5mm would not fit.
The issue that I had was that it had a jamming problem. The blue nozzle would get jammed after each shot or a few shots. This is a major problem for me because it's not good when my gun is jammed, but also the slide will not close, thus allowing all this dirt and stuff to get in there. I think the reason for this is because of the nozzle being a little too tight for the piston cap. I assume this minimizes lost of gas power and increasing FPS and range, but all of the FPS will be useless to me if the gun jams like that a lot. I'd like to point out that this mainly, if not only, happened with the non-WE magazines. The standard and hi-cap WE magazines I have never had a jamming problem that I could recall. However, the mag that came with the gun, a mag of the same brand, and a CO2 mag caused this jamming. I assume that these magazines feed a higher power of gas, thus causing the nozzle to push forward more and have a higher chance of getting jammed.
Note: I did not try adding lubricant, and this jamming only happens when you are firing bbs. I tried testing the jamming issue with empty mags and they would not jam.
Accurate. (I was on par with a sniper or a DMR using .25s from 100+ ft. on a windy day)
Jamming issue that I've stated above. "The gun arrived faulty out of the box. Seems KJW related. The magazine will fall right out after every single shot fired (with green gas & c02). The mag is fine however, because I have tried it with 3 different mags (both c02 based and green gas).
It's most likely a worn mag release latch, although I'm not sure how that even happened, because the gun is brand spanking new.
Weighs a good bit, adds to the realism factor.
FPS is solid @ around 365 ish. Hurts a tad bit.
Paint is solid, and has yet to chip.
Sturdy, don't be afraid to drop it.
Looks very realistic as an m9 replica.
Mag falls out per shot (Apparently I'm not the only one with the issue, check Google)
The orange tip is a pain the ass to remove, (if possible) - so I painted over it.
Trigger feels a tad wobbly.
That's about it folks. I'd go with a different M9 manufacturer, to keep yours from being fauly like mine. It's no fun to shoot if you have to hold the mag in yourself after every shot. "after doing some research and a little shopping around, I decided to pull the trigger on this KJW full metal M9. it arrived today and I wasted no time in loading it up and putting it to the test. I fired about 100 rounds through it with ZERO misfires or skips.... flawless operation! at least so far.. I was very impressed by the overall look and feel of this pistol. VERY accurate replica of a real M9. solid, full metal body and accurate weight. the only weight difference between this and a real M9 would be the additional weight added from real ammo. if not for the orange barrel tip, you'd never be able to pick this out as a replica in someone's hand. slide operates smoothly, realistic blowback and VERY accurate! overall, a very well made, high quality pistol... for under $100!!! I couldn't be more satisfied, and I highly recommend this pistol! Read More Reviews Write a Review
« Back to product description
Newest Ver. KJW Full Metal M9 Government Airsoft Gas Blowback Pistol
This is the "PTP" line of M9 Gas blowback by KJW. This very model is being used by US Military & Law enforcement for training today, hence it's performance and realism. Externally, this pistol is as real as it gets with blowback action, full metal slide & frame, on frame safety, magazine release, shooter's grip, hopup and tons more other features. Basically, it is the one gas gun with the most metal parts in the market today. Internally this new version is equipped with the newest reinforcement parts that are so durable you can power it with Co2, Propane or red gas.
8.5" Long x 5.25" Tall. Barrel Length: 5". Weight ~2 lbs.
25+1 (Green gas Mag included. Co2 Mag available)
Green gas, propane adapter, red gas, CO2.
- Full Metal Heavy Weight New Version Aluminum Slide and Frame.
- Able to handle high pressured gas: green gas, red gas, Co2, Propane adapter.
- TONS of after market upgrade / replacement parts available.
- Hard Kick Blowback Action / Working Realistic Hammer action.
- Great accuracy and performance.
- Standard Military Type Tactical Grip.
- Ambidextrous on frame safety.
- Built in front & rear sight with high visibility white dot.
- Reinforced metal steel parts on entire pistol.
- Built in lanyard adapter, a spec. requested by the US military to KJW. For increased tactical advantage and realism.
- On Slide Serration.
- Its a KJW: Marui Design, reputable manufacture and its close relationship with your#1 retailer means it will never go out of service on you. (Tons of spare / upgrade parts available).
Review: First impression and feel:
Perfect. It is heavier than a HFC M9, the finish is flawless, with working hammer, slide, safety, magazine release...it is as realistic as it gets.
The New KJW is equipped with the most reinforcement parts there is. In fact, KJW is the OEM for many after-market upgrade parts brands such as Guarder & Tanio Koba for the Tokyo Marui M9.
If you are looking for a M9, you cannot go wrong with this one. It is simply the best out there. When it comes to picking an Airsoft gun, you want something reliable, accurate, realistic and have manufacture / after market part support right and this one's got it all.
*All gas guns comes with bright orange tip to comply with US law and regulations.
This product was added to our catalog on Tuesday 01 January, 2008.