SR-Q Tactical ForeGrip for 20mm Accessory Rails
(Color: Tan)

"Unfortunately, you can buy this product At half the price from the creator of this product on their official website if you just look up the name.

Other than that, it’s a really and I mean really good angled for grip. It feels solid however, the only thing I’m worried about is that it sounds hollow and I’m wondering how thick the walls are on these four other than that the form and feel of it is amazing and it looks really cool too, can’t recommend this for grip enough.

However, there is one con because it is 3-D printed you might run into some issues sliding it onto your Picatinny rail like I did, and it was a really tight fit at first I recommend putting your gun on the ground with the butt Stock on the ground and pushing straight down being very careful But pushing down hard Till it slides in a little bit and then pull it out, flip it over and do that again and repeat that until it slides down somewhat easily. If you are using an aluminum rail it should start cutting away at 3-D printed material to slide On Easier, however if you’re using Plastic rail, then you’re gonna have a hard time putting this thing on.

"tl;dr this thing is awesome

First things first: why the hate? I'm glad I didn't listen to the badmouthing in the comments. This isn't "crap 3d printing". I have a sneaking suspicion there are boomers who hate anything new or interesting crap talking SRU in their comments sections. I got this just today. It is built like a brick. There is no flex in the grip, nor the thimbhole portion, nor in the built in barricade stop. It fit so tightly onto the rail that I probably didn't need the screws. There ISN'T a hex wrench included, or at least I didn't see one, so make sure you have an allen wrench set. The holes for the bolts on the opposite side fit so tightly that you don't need to worry about having anything to grip them while you drive the bolts in. The whole assembly fit so tight that I had to pound on it with my fist to get it all the way on. When I did, there was NO wobble on the rail, and NO flex in the grip. I was previously using a fortis aluminum grip, and this thing has better fit and just as good finish. I WILL be buying more in the future, despite the price.

"Make sure you read the dimensions because it is very small was very solid and well made if it was double the size then it would be perfect.