ASG Infinity CNC Custom Airsoft AEG Motor
(Type: Long Axle / U-40000)

"Struggled to put this motor in my LCT ak because it is bigger than their stock motor and motor cages. It runs very cool (22000) and powerful torque. Pulls a 130 spring on 10:1 gears with no issue on an almost dead 7.4v

"I have 2 of the 22k motors. One for my lct rpk16 and another for my double eagle. They have ferrite magnet motors but there are cheaper options for roughly the same amount of performance but these didn't get hot once even with extensive use of full auto. I'll have to see if cyma motors bet bot because I never got to use my mp5 in full auto a whole lot but regardless these are good quality motors. There's just better options for the money

"Amazing motor. (Bought the 30k Long type). I needed to upgrade my stock motor (18k g&g motor) because of overheating on semi. The airseal and mosfet upgrades had taken a toll on the stock motor and it was struggling on relatively fast semi. I wanted to get a motor that would increase the rpm and tpa, but not spin so fast that it would destroy the gearbox. Not only is this motor beautiful, but it significantly decreased the overall noise drastically cut down motor heat, massively increased the trigger response, and gave me a suprising increase in the rof. (18rps--_25rps with an 11.1v lipo) & (12rps--_16rps with an 7.4v lipo). Only downside is the pretty penny that this costs. However, it was completely worth it. I am going to be changing the stock 18:1 gears to 16:1 gears because the motor is actually too strong and causes overspin in semi (with an 11.1v) But if you ask me, that is better than being underpowered. Long story short, this motor is worth it.