Lonex 8mm Airsoft AEG Gearbox Shell - Ver.3

"The Gearbox is excellent and holds up well. The only issues I had with it was little incompatibilities with a CYMA AK. The trigger axle was to thick to fit into the holes and the motor cage was also too narrow to fit with the gearbox. An hour or two with a small file fixed the issue, just be aware that it might not be 100% compatable.

"I put this shell in my g36 and had no problems with combatibility. I was happy to see that lonex makes there bushing holes smaller than 8mm so that your bearings/bushings fit snug. I am very happy with this shell, and would recommend it to anyone with a v3.

Pros:
-Comes with really nice bearings, tappet and hardware.
-Strong shell, handles my 380fps @40rps
-Really nice shiny color

"Great gearbox! I purchased this for a customer's Mp5k rebuild and everything fits as it should. It includes the screws and retention plate on the top to keep it all together as well as a tappet plate, which was a pleasant surprise. Only giving 4 stars because it does not come pre-radiused and doesn't include a spring guide, despite being labelled as "hardware included," although these are pretty minor things. All things considered though, this is a solid gearbox and I would very likely purchase one again.

Pros:
-Includes a tappet plate
-bearings come pre-installed
-polished interior finish
-plenty of space for ANY gear set
-screws and plate included.

Cons:
-Does not come pre-radiused
-Does not include a spring guide
-Fitting a Gate TITAN is SUPER tight, but definitely doable.