LCT Airsoft Z Series ZB-30 Tactical Railed Handguard for AK AEG / GBB Rifles

"Bought for my E&L AK104. Pairs with the similar upper rail ZB-31 really well. Like others have said, if fits with a little modification. The back of the rail has a block that you remove with two screws that sits inside the receiver (it actually comes with two, one that is a little taller). I used the taller one and shaved down the sides and top a little to get it to fit inside my receiver. I did have use a rubber mallet to get it to sit tight but I wanted it more tight than loose but you can shave it down more if you’re going to be disassembling the gun often. It really did not take a lot of filing to get it to fit.

My only gripe with it is the weight. This is a minuscule complaint but it seems to add a decent chunk of weight to the front of the gun. It says it’s aluminum but either it’s really thick aluminum or they’re lying because it’s hefty. That being said though it’s a strong rail and once you fit it it’s nice and snug.

"It will work on E&L but you need to work on it a little. I found using a Dremel to sand down the rear insertion block. Fortunately you can unscrew it from the handguard and it's aluminum so it's easy to work with. The little block is wider that the cavity where it inserts into the receiver. I was a little conservative so I used a mallet to press it in. The next thing you need to do is get the collar (where the sling loop is) to slide into this U shape that's in the handguard. I went on and used the Dremel again to take away a little material off. I used a flat head to lever and push them together from the top. It needs to go all the way or the little lever that you flipped to remove the old lower handguard won't lock in.

Otherwise snug as a bug.

"Fits an E&L Essential AK105 good, I just smacked it with a gamer in and, boom, new handguard. I didn’t have to file, but you may want to because it was semi hard to get it in. I didn’t because I wanted it to be stable, It seemed fine without filing, but results may vary.

Pros:
Pretty cheap for replica Zenitco
Sturdy
Looks nice

Cons:
No trades (Doesn’t bother me, but it might bother some)
Kinda hard/difficult to put in, but feels stable after