ASG 11.1V High Performance Stick Type LiPo Battery (Configuration: 1000mAh / 25C / Deans)

"I got the stick one 11.1v 900mah. The dimensions are actually 18.3mm width x 12.5mm height. Its a little shorter than a 9.6v nimh stick. I got it for my classic army mp5k and it barely did not fit. You need something _18mm for it to fit in the tiny space. I may just get a peq. Anyways, the 2nd cell is malfunctioning, which I noticed asap when I opened it and put it on charge. I have an expensive Accucell charger and it told me there was a cell error, cannot charge. I checked with those little voltage alarm readers and sure enough, cell 2 is 1.1v and the other 2 are like 3.8v. I will return this for store credit and get a square peq instead.

"It does fit in the evo, but you cannot use the charging handle and the battery will get cut very easily, very dissapointed, dont get under ANY circumstance

"Configuration: 900mAh / 15C / Small Tamiya
Their measurements are completely useless sight stayed 15mm x 10mm the one that came to my house was more like 20mm x 13mm and had two of the three cells at 1.7V (dead) rather than 3.7V. The Mosfet in my gun (which beeps for each cell detected) only beeped one time meaning only one cell was detected and good.

"Unusable for the ASG Evo. Actual battery dims 20mm x 20mm x 175mm

"Does not actually fit in a ASG Evo 3a1. The cocking lever cannot pull back while the battery is in. Ordered 2 of these and now I have to RMA them due to false advertising.