ID: 59355 (AEG-APS-ASR118)
Hover or touch above to zoom
Optic not included
MAP ProtectedExempt From Coupons
Free ShippingNo Coupon Required
- Precision Lipo ready high cycle Silver Edge gearbox
- Metal receiver with laser engraved trademarks
- Custom hand stippled motor grip
- Gold tone finished selector, mock bolt, mag and bolt catch
- Functioning bolt stop for easy hopup adjustment; "Yippie kay yay" laser engraved morale dust cover
- Metal 14.5" Keymod rail system (3x additional accessory rails included)
- Flip-up front & rear sights, high visibility fiber optic front sight
- 6-position retractable crane stock
FPS Range: 390-415
The all new APS Silver Edge Gearbox utilizes a unique polishing technique to remove burrs and surface imperfections from the gearbox shell. This polishing leads to an incredibly smooth and even finish that will reduce friction and lower the gearbox load. These improvements lead to a more efficient gearbox that will use less power, generate less wear, and allow for the smoothest cycle possible for enhanced performance as well as greatly extending the life of your gearbox.About the Silver Edge Gearbox:
The APS Silver Edge gearbox is yet another step forward with improvement of the tried-and-true version 2 gearbox. APS took their Hybrid Electric Blowback gearbox design and improved upon it with some excellent key features. First and foremost they use an improved strength Grade 5 aluminum alloy for the gearbox shell material. They then fully polish the interior of the gearbox to a chrome-like finish, effectively reducing friction on the moving parts that contact the gearbox walls, such as the sides of the piston and the tappet plate. From there they deck the gearbox out with steel gears riding on 8mm stainless steel bearings, low-resistance wiring and trigger switch, and to top it all off a Quick-Change ball bearing spring guide allowing for easy spring changes in the future. All of these improvements net around a 15% increase in overall efficiency, when compared with standard Ver2 gearbox designs. What this means for the user is better battery life, smoother gearbox performance, and improved gearbox longevity.Length:
300rd Hi-Capacity. Works with Matrix, APS, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
390~415 FPS (Measured with 0.20g BBs)Thread Direction:
Ver. 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
9.6v Small Butterfly Type recommended (Battery not included. Wired to the stock with a Small Tamiya connector)Hopup:
Gun, Magazine, ManualManufacturer:
APSThings you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.
Spare Magazines – Stay in the fight longer by bringing more ammo with you.
BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.
Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
About APS / Hakkotsu
APS Limited was established in 2001. APS started by specializing in designing and building Simulation Training Equipment (Real Action Markers & Powder Balls for training simulation). APS - the three words stand for Accuracy - Pneumatics - Shooting. With their knowledge and experience that has been gained from making Real Action Markers and Projectiles, APS launched a new product line - Electronic Blow Back (EBB) products to spur the current Airsoft Market. Since entering the Airsoft industry their line of Airsoft rifles, pistols and accessories have been incredibly popular.
(Write a review)
"i have a question about this airsoft rifle. i have a lonex a2 orange high torque motor and i would love to put this in the rifle can i do so with out hurting the gearbox or making any further upgrades ? i also plan on putting a lipo in this i have a 11.1 volt lipo and a 7.4 volt lipo witch one would you think works best with the stock set up. i habe yet to buy this rifle but am planing on it if its compatibility is going to be ok with what im trying to do. its a simple but good upgrade but i just dont want the gear box to be stressed.
"I have had this rifle for less than a year and its working very good, its solid, sturdy, and it shoots hard. The only recent problem was the hopup arm broke so i got a GnG unit, because the APS hopup unit was reviewed badly, but other than that it has a great range and good accuracy, great beginner to intermediate rifle. It is full metal, heavy, but realistic. The 45° iron sights are nice to have in short range situations.
- Wonderful range
- Good accuracy
- Solid, sturdy, nice bearing weapon
- Realistic and a stunning platform
-Smooth firing (no jamming problems)
- Easy to dissasemble
- Hopup unit has little quality
- If you cant do heavy or loud i dont suggest this rifle
-average firing rate
OVERALL this is a great beginning weapon for the budget and it is a full auto dmr beast. Only problem is hopup unit, keep up the good work APS/HAKKOTSU
"Just got this gun about a week ago, and I must say, fantastic.
Pretty accurate @ 100 ft (used .25 g bbs)
45 degree flip up sights let you use magnified scope or red sights and iron sights at the same time
Grip is gritty for nice gripping (also a con, as it is sandpaper esque and can hurt if not wearing gloves)
Cheap plastic stock
Charging handle looks like it would easily break or fall off
Orange tip/muzzle break thats comes on the gun can be a bit difficult to take off.
grip (see above)
Since I had some trouble taking off the orange tip/muzzle break, I will let you guys know how I did it.
To get the keymod railing out, I had to actually take off the orange tip, because it was too thick for it to slide off with it on. You will see what Im talking about when you try.
So, I boiled some water, and soaked the plastic tip for 10 mins, and then plied it off. Then, I was able to take off the keymod railing. After that, there is a super small hex screw that keeps the mock muzzle breaker in place, so take that out, and then you can get an adjustable wrench and twist it off. I bought a "APS RT-S Muzzle Mock Suppressor" from this site, and it fits the barrel stablizer, so you won't need to take it off, (if you get a larger mock silencer, u can take it off as it does not need it.)
+ I would probably get a vertical grip or an angled one I got the (Magpul USA AFG2 AFG II Angled Fore-Grip 2 ) because this thing is heavy and you will get fatigued.
Discuss about APS ASR-118 Boar Tactical Custom Silver Edge 17 KeyMod Airsoft AEG - Black with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov