ID: 27220 (FTK-GE-ITK-38)
Free ShippingNo Coupon Required
Guarder SP150 Infinite Torque-Up Kit for AUG Series Airsoft AEG
Full Tune-Up Kit Include:
Infinite Torque-Up Steel Gear
Bore-Up Lucid Chromium Plating Cylinder
Bore-Up Air Seal Nozzle
Bore-Up Stainless Cylinder Head
Bore-Up Enhanced Ventilation Piston Head
6mm Steel Bushing
Steel Anit Reversal Latch
Steel Enhanced Cut-Off Lever
Ball Bearings Spring Guide
Material: S303 Stainless Steel/Brass/Polycarbonate/Aluminum/Acetal/Steel
(Write a review)
"This spring will fire approximately 500-550 fps, but the actual fps will depend on barrel length and the full internals, like how good the air seal is between the piston head and cylinder (can be increased by a better o-ring) and the cylinder and cylinder head. But i've seen studies that the fps is lowered by the "silent" piston heads but should be helped by the bore-up cylinder set. The gearbox will need to be replaced, the stock one will be cracked by the spring. If you want to use this you will need a reinforced gearbox. I would recommend one with 8 mm ball bearings. Also, if you are not experienced you should probably start with something a little less powerful. This will also be hard to put together by your self because of the pressure the spring produces when compressed.
Discuss about Guarder SP150 Infinite Torque-Up Kit for AUG Series Airsoft AEG with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov