Angel Custom Neo 1-piece Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles

Angel Custom42424
3.8 stars, based on 8 reviews

$60.00 $51.00

This item is currently Out of Stock

Usually restocked within 1-3 weeks. Add to your wishlist to stay posted!

ID: 42424 (AC-APS-08)
x

8 Customer Reviews

by Mae S. on 03/21/2016
"This hop up was a pain ...I purchased it for my utg l96 and the magazine catch screw would not screw into the screw hole on this hop up. Also their is this little o ring that goes right behind your hop up bucking, and I took a good 3 hrs trying to get it in and realized there was no groove for the o ring to even go in. REMEMBER YOU NEED AN AEG BARREL AND AEG BUCKING FOR THIS HOP UP TO ACTUALLY WORK. I ended up returning this item and got a action army l96 hop up chamber because it has a built-in tdc mod, and the thing works great. I paired the hop up chamber with an angel custom 500mm aeg inner barrel and a Prometheus hard aeg bucking. Go out and find an action army hop up chamber. It works great!
by Joseph A. on 02/12/2016
"I'm now a couple of years into owning this hopup, so here are my observations thus far:

The adjustment screws are M2.5 x .45 x 4mm (I had to replace one so I measured the other one and these M2.5's are identical)
Hopup nubs can be hit and miss depending on the bucking you choose, in my case the Wii nub was perfect for my first bucking but provided too much hop on my SHS replacement - for the SHS the included nub worked just fine

As far as the adjustment wrench is concerned, I lost mine so I had to improvise. I don't know the exact size, but I found an Allen wrench that fit and bent it straight so that I could fit it into a micro hand drill (the Citadel drill sold by Games Workshop to be precise) and I use this as a hopup adjustment tool. It is long enough to reach into the hop without having to remove the tool to adjust for more than a 1/3 turn.

To sight in:
(Works best with no or minimal wind and/or other environmental factors)

1. When adjusting the hopup, remove your scope and get the gun shooting as close to straight as possible.
2. Then attach the scope/optic.
3. Observe the flight of the bb at long range using the optic - get the bb to fly as straight and true as possible WITHOUT touching the scope/optic adjustments
4. Once the rifle is shooting as straight as possible, attach and adjust your optic to follow the path of the bb.
by Joseph A. on 12/15/2015
"Great chunk of a hopup!
Purchased for my SR-2 sniper rifle. Owned and operated for over a year at this point

Allows for left/right hopup adjustment as well as up/down like a normal hopup - as a result, you can correct the trajectory of the bb extremely well and vastly increase the range of your rifle.

Pros:
+ allows for left/right adjustment
+ sturdy metal
+ small grub screws (hex/allen style) allow for VERY fine adjustments
+ Uses AEG type barrels
+ Uses AEG Buckings (make sure you buy a good one designed for high FPS)
+ Slides right in - no modifications necessary
+ Seems to improve the smoothness of the action and increase FPS slightly

Cons:
- Included hex wrench is a small size - DO NOT LOSE IT, most hardware stores don't stock keys this small
- difficult to adjust - bolt must be back and mag removed to adjust
- included hopup nub doesn't seem right for the system - i recommend getting the Wii nub, or one of a similar design (http://www.evike.com/products/47672/)
- DO NOT USE A V or W type BUCKING - these do not fit right with some barrels in this hopup - the standard buckings work just fine.

My setup: SR-2 with Angel custom hopup chamber (this one), Echo1 ASR upgrade spring set, Prometheus 6.01 tightbore 455mm and an SHS hopup bucking. Shoots 416fps with 0.36g bb's and is deadly accurate. The owner of my local field was incredibly impressed at the range and accuracy of my rifle, particularly because its spring and only has a 455mm barrel. Most of the accuracy and range can be attributed to this hopup chamber, so i highly recommend it.

Note: most rifles do not come stock with an AEG type barrel or bucking, so if you purchase this, make sure you get an AEG barrel that's the correct length and an appropriate bucking.

100% satisfied with this product - seems like a lot of money, but if you're a serious sniper then you need a serious hopup.
Angel Custom Neo 1-piece Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles
Angel Custom Neo 1-piece Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles

Features:
  • Made from High Quality CNC Aluminum
  • For use with AEG Style Inner Barrel and Hopup Bucking/Nub
  • Set Screws for Micro Adjustment of BB Hop
  • Internal Set Screw and Spacer to ensure Inner Barrel is Centered
  • Nylon Internal BB "Cradle"
  • Allows for Extremely Precise Hopup Adjustment
  • Can Greatly Improve Feeding and Accuracy

  • Compatibility: For Type96 / APS2 and other compatible Airsoft Spring Sniper Rifles (Requires AEG Style Inner Barrel and Hopup Bucking, not included)
    Material: CNC Aluminum

    Manufacturer: Angel Custom

    This item is currently Out of Stock. Most out of stock items are restocked within 1-3 weeks. Some items may take longer. Please add this item to your wishlist to keep posted on its availability.

    Wanna chat about Angel Custom Neo 1-piece Hopup Unit for Type96 / APS2 Airsoft Sniper Rifles?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale