- User-friendly in-line programming - User can program the AEG at any moment by just using the trigger
- Programmable shot count from 2-12
- Programmable shoot mode of up to 30 shots
- Equipped with battery-low protection
- Equipped with up-to-date power MOSFET technology
- Active braking technology employed
- Beep tones available for programming confirmation and battery low indication
- Self-adjust battery status to suit various types of batteries
Add "burst function" to virtually any Airsoft AEG in seconds! The Burst Avocado provides you reduced gearbox wear and tear, improved trigger control and tactical advantages! The Burst Avocado is the Ver.2 design of the Burst Wizard we previously offered with "easier adjustment", "mosfet technology" and "real time burst fire"!
The "Burst Avocado" is equipped with low-battery detection. There are 2 pre-installed thresholds at 6.3V and 9.3V allowing a wide range of battery voltage to be used. The device will detect the initial voltage when the battery is connected and determine which threshold to be used. Once the battery goes below the preset threshold, the device will generate a warning tone and stop the gun from firing during trigger pull. This is especially useful for LiPo battery applications due to the inherited trait of LiPo batteries where they should not to be drained completely.Manufacturer:
Avocado Airsoft USAConnector Type:
45mm x 17mm x 8mmOperating Voltage:
7.2~12.0VMaximum Continuous Current:
65 AmpRecommended operating battery type:
Li-po 2~3 cells. (7.4~12V)Programmable "Burst" Mode:
1 to 12 shotsProgrammable "continuous mode:
30 shotsBattery Low Detection:
6.6V ~ 9.9V
*If your AEG's ROF is higher than 25, there will be a inaccuracy of +1 shot. For example, 2 trigger pull adjustment for 3 round burst and so on.ONLY use the following types of batteries with the Burst Wizard:NiMH: 7.2v (6 cells), 8.4v (7 cells), 10.8v (9 cells), 12v (10 cells)LiPo: 7.4v (2 cells), 11.1v (3 cells)DO NOT USE NiMH 9.6v (8 CELLS) WITH THIS MOSFET UNITWarranty:
The Burst Avocado-II carries a limited warranty when in an unmodified original condition.
Established in 2011, 6mmProShop Inc. is a USA based manufacturer and distributor with a mission to bring law enforcement training, Airsoft sporting events, and military simulation to the next level. 6mmProShop features exclusive licensed products, unique innovations, and distribution rights of many exciting products from Japan, Europe, South America, and Asia. With headquarters located in the USA, 6mmProShop offers unmatched product support, inventory availability for resellers, and worldwide exclusive products!
(Write a review)
"works good and as expected!
"This does its job. It was great for my DMR, I had it on 2 round burst for a while, and then put it on semi for milsim. it is very sturdy, fits into a buffer tube well, and has kept my wiring alive, with an 11.1v lipo. My only complaint is that on burst, you have to hold down the trigger through the entire burst.
"I love this product. Got it because my friend had one and seemed great. I'm using it for my DSG under 300FPS build for room clearing. Somehow managed to stuff this(with modification)... and a fuse.. and a 1200mah 11.1v lipo into a stock CYMA!
Discuss about Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Connector: Standard Deans) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov