$40.00 $32.00 Add to Cart Add to Wishlist
MAP ProtectedExempt From Coupons
Features User-friendly in-line programming - User can program the AEG at any moment by just using the trigger Programmable shot count from 3/6/9 Programmable shoot mode "Auto Fire Mode" Equipped with battery-low protection Equipped with up-to-date power MOSFET technology Active braking technology employed Beep tones available for programming confirmation and battery low indication Self-adjust battery status to suit various types of batteries Add "burst function" to virtually any Airsoft AEG in seconds! The Burst Avocado provides you reduced gearbox wear and tear, improved trigger control and tactical advantages! The Burst Avocado is the Ver.2 design of the Burst Wizard we previously offered with "easier adjustment", "mosfet technology" and "real time burst fire"!
The "Burst Avocado" is equipped with low-battery detection. There are 2 pre-installed thresholds at 6.3V and 9.3V allowing a wide range of battery voltage to be used. The device will detect the initial voltage when the battery is connected and determine which threshold to be used. Once the battery goes below the preset threshold, the device will generate a warning tone and stop the gun from firing during trigger pull. This is especially useful for LiPo battery applications due to the inherited trait of LiPo batteries where they should not to be drained completely.
Manufacturer: Avocado Airsoft USA
Specifications: Connector Type: Small Tamiya
Size: 45mm x 17mm x 8mm
Operating Voltage: 7.2~12.0V
Maximum Continuous Current: 65 Amp
Recommended operating battery type: Li-po 2~3 cells. (7.4~12V)
Programmable "Burst" Mode: 3/6/9 shots
Programmable "continuous mode: Auto Fire Mode
Battery Low Detection: 6.6V ~ 9.9V
*If your AEG's ROF is higher than 25, there will be a inaccuracy of +1 shot. For example, 2 trigger pull adjustment for 3 round burst and so on.
ONLY use the following types of batteries with the Burst Wizard: NiMH: 7.2v (6 cells), 8.4v (7 cells), 10.8v (9 cells), 12v (10 cells) LiPo: 7.4v (2 cells), 11.1v (3 cells) DO NOT USE NiMH 9.6v (8 CELLS) WITH THIS MOSFET UNIT Warranty: The Burst Avocado-II carries a limited warranty when in an unmodified original condition.
About 6mmProShop Established in 2011, 6mmProShop Inc. is a USA based manufacturer and distributor with a mission to bring law enforcement training, Airsoft sporting events, and military simulation to the next level. 6mmProShop features exclusive licensed products, unique innovations, and distribution rights of many exciting products from Japan, Europe, South America, and Asia. With headquarters located in the USA, 6mmProShop offers unmatched product support, inventory availability for resellers, and worldwide exclusive products!
Connector Type: Small TamiyaSize: 45mm x 17mm x 8mmOperating Voltage: 7.2~12.0VMaximum Continuous Current: 65 AmpRecommended operating battery type: Li-po 2~3 cells. (7.4~12V)Programmable "Burst" Mode: 3/6/9 shotsProgrammable "continuous mode: Auto Fire ModeBattery Low Detection: 6.6V ~ 9.9V *If your AEG's ROF is higher than 25, there will be a inaccuracy of +1 shot. For example, 2 trigger pull adjustment for 3 round burst and so on.ONLY use the following types of batteries with the Burst Wizard:
NiMH: 7.2v (6 cells), 8.4v (7 cells), 10.8v (9 cells), 12v (10 cells) LiPo: 7.4v (2 cells), 11.1v (3 cells)
(Write a review)
" Just received this in the mail (deans connector version) and it is a great little add on to any AEG. The simple plug and play is great for new players/experienced just wanting to add a simple burst feature to their AEG. The mosfet has active braking which seems to work, but remember still be cautious when using 11.1 lipo/LI-ON batteries since this does not protect your trigger contacts. Any mosfet that is not wired to your trigger contacts directly, does not protect it from failing.
It recommends that you do not use a 9.6 battery, but I do and have no issues with it. Very simple to use. There are videos on YouTube to visually explain how it works. Definitely recommend!
" works good and as expected!
" This does its job. It was great for my DMR, I had it on 2 round burst for a while, and then put it on semi for milsim. it is very sturdy, fits into a buffer tube well, and has kept my wiring alive, with an 11.1v lipo. My only complaint is that on burst, you have to hold down the trigger through the entire burst.
Read More Reviews
Write a Review
Evike.com Online Store In Stock
2801 W. Mission Rd., Alhambra, CA 91803
In Stock
13742 N. Eldridge Pkwy., Cypress, TX 77429
(281) 547-8367
In Stock
1400 W. 4th St. #2, Antioch, CA 94509
(925) 237-2560
In Stock limited quantity
319 West Holt Ave., Ontario, CA 91762
(909) 395-0056
In Stock limited quantity
Discuss about Burst Avocado Programmable MOSFET For Airsoft AEG Rifles (Model: Ver IV / Small Tamiya) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us , our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Add to Wishlist Add to Cart