Tenergy Lipoly Battery Smart Charger + BMS Unit (Standard / Universal Type)
For Lipoly Battery with standard BMS charging plug (XH 4-Pin & 3-Pin Charging Connector.)
No more $100 LIPO balance chargers that prevent you from going with LIPO/LiFeP04 batteries!
This full featured 7.4v & 11.1v LIPO/LiFePO4 Balance charger is an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Also supports large capacity (mAh) packs, but will require a longer time to be fully charged.Charging:
The charger is a smart charger. Plug and play / easy to use. The light will turn green when its fully charged and red when its charging.
Always monitor your battery charging and charge your lipoly battery only on non-flammable surface.
Average charging time depends on how much power is left inside the battery and battery capacity. (1500mah is around 30 minute to a hour).Features:
* Built-in balance. Batteries are automatically balanced during charging, ensuring full charge.
* Automatic constant voltage, constant current and trickle charging.
* Automatically terminate charging process when input voltage is lower that 10V or higher than 16V
* Reverse polarity and short circuit protection
* Over-Charge and Over-Current protection
* Light weight and attractive case
* Applicable for Li-ion, LiPo and LiFePO4 battery packsSpecifications:Applicable Battery Types:
LiPo,Li-ion, and LiFePO4 batteryBattery Count:
1~4 cellsInput Voltage:
DC 10~16V, 1.5ACharging Current:
88 x 57.3 x 16.8mmWeight:
Approx. 100gOutput Connector:
3 pin and 4 pin JST ConnectorLED:
o Red: Charging
o Green: Fully Charged and Balanced
* Never attempt to charge 2 battery packs simultaneously
* Never leave the charger unattended when it's connected to the power supply
* Terminate charging when any malfunctions is observed
* Keep away from dust,damp, water, heat, direct sunshine and vibration
* Never place it on case seat, carpet or something similar. Place the product on heat-resistant, non-flammable and non-conductive surface
* Do Not charge the following types of battery:
o Lead acid battery or VRLA
o NiMH or NiCD battery pack
o Non-rechargeable battery (explosion hazard)
o Faulty or damaged battery
o Any other types except for LiPo/Li-ion/LiFePO4 battery packs
o Battery pack which consist of different types of cell, or different brands
GROUND SHIPPING ONLY NOTICE: Due to US DOT and IATA shipping regulations, batteries shipping Air must have a charge of less than 30%. A lithium polymer battery in this state of charge for long periods of time will become damaged. For this reason, Evike.com will not be shipping batteries via Air shipping methods. This includes all international destinations outside the continental U.S. You will only be presented with ground based shipping options if your order contains a lithium battery.
Discuss about Tenergy Lipoly Battery Smart Charger + BMS Unit (Standard / Universal Type) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov