Matrix High Output Nunchuck Type Airsoft NiMH Battery (Configuration: 9.6V / 1600mAh / Small Tamiya)

"•!!!WARNING!!!• The 9.6v, 2400 mAh Nunchuck battery is slightly larger than a normal one. It may not fit your crane stock. It did not fit in my G&G CM16 SRXL. It's a great battery though.

"works great but unfortunately it doesn't fit in my Krytec Trident stock so ill have to buy a liPo instead in the mean time ill have to attached it to the outside of the stock

"decent batteries however after 3rd charge it lost like an hour of using both of the 2 batteries i got not sure what happened

"very high quality battery. THE 9.6V 2200MAH CELLS ARE THICKER THAN A 1600MAH, 2200MAH WILL NOT FIT IN CRANE STOCK.

"All in all, these batteries are good. They do the job and evike was nice enough to send extra batteries than i ordered, which is always a good thing in my opinion. The only issue with them, they are still somewhat weak for running m130 springs and tend to drain fast even with a high torque motor. anything lower though works just fine.

"At first glance, I thought it looked a little cheap, but rather than judge a book by it's cover, I plugged it in and I was very happy with the rate of fire it gave my m4 cqb. It seems to hold a charge well, so I guess my only complaint would be that it's a little skinny, so it does rattle alot in a crane stock, but thats no big deal. All in all, I'd say it's a good battery at a great price.

"will this type pf battery fot in a 416 butt stock???

"Nunchuck's the the ideal configuration for G36c's because they fit around the barrel inside the battery holder much better than standard double stacks.

"Does NOT FIT LCT AK104 DUST COVER. I got the nunchuck version and it doesn't fit without modifying the gasblock. The same with a Stick type. Its seems like SLIM LIPOS 7.4v AND 11.1v fit no problem.

For M4s:
Fits Krytac Stocks, KWA Vm4a1 Stocks, and VFC M4A1 Sopmod


I notice the trigger response on my LCT AK104 and KWA VM4A1 With the tamiya Head is Average even after fully charged
It's Not that FAST and it seems like you'll lock your gearbox up if you spam the trigger on semi.
(FOR VFC & KRYTAC IT'S FAST. No Problem.)

The Deans version however does give it a little Noticeable bump in trigger response. (From my experience with Valken 9.6v batteries
If your gun is wired to Deans and you use a 9.6 with Deans you'll hear and feel a slight difference)

"So yeah got this for my Elite Force CQB M4 and the cells are too big? What in the world? It won't fit. How utterly disappointing. I will have to take the stock off and tape the batteries to the buffer tube to make it work. Hippopotamus!

Crane Stock that comes with the Elite Force CQB M4 is not compatible with this battery. I will update if I find a way to get it to fit that does not require modifying the stock.

"I've bough 2 of these batteries so far and they are decent batteries except they drain extremely fast with a m130 spring in your gun. Also on my batteries it says 1100mAh instead of 1600mAh which was a bit of a dissapointment.

Pros
Charges fast
last for about 30 minutes in a Op

Cons
1100mAh
loses charge fast

"Are these already charged when bought?

"I got this battery to replace a stock CYMA 8.4 v 1200 mah battery. At first I was pleased as it is in fact much more powerful, and, after the first charge battery life and power was extended and very noticeable. This lasted for approximately a month, then it was back to college for four months. Now, this same battery cannot match the standard 8.4 v battery even fresh off the charger. The 8.4 v hasn't been charged in weeks but can still power my gun. The freshly charged Matrix 9.6 v can't fire on semi or full auto. If you're going to end up letting this battery sit for a while don't waste money on it. To LiPo I go.