Lonex TITAN Airsoft AEG Motor (Type: Long Type / High Speed)

"Motor works great i have short version have it in my e&l ak74u its pulling an m120 spring on 12:1 shs short stroked two teeth with 11.1 lipo 30c its getting 46 rps with 398 fps I have pulled m160 on stock ratio gears with this motor so they are stronger than what they are rated .

"Love this Motor so much, I've had it around a year now. I'm hitting around 24 rps with this bad boy I love it! I use a 20c 11.1 1300 mAh lipo and it works like a charm.

Pros
Fast
Quiet
Durable

Cons
Gets hot (all motors do)
Pricey

"I ordered one of these at the beginning of the 2015 year to put into my A&K M249 MKII and I must say, it was a stellar choice. It has a great ROF and easily pulls the M120 I have in there with a 9.6 NiMH. It was easy to install and is just a good, solid motor. Perfect for an LMG upgrade.

11/10 would use again.

"I put this motor in my AGM M4 CQB compact after upgrading to an M135 irregular spring. The firing rate is incredible even with an 8.4v battery! I recommend this motor for any gun that accepts a long type motor! Amazing value compared to other brands.

"this motor is amazing. it'll pull whatever you throw in your gearbox, and at a serious rof. Highly recommend.

"The Good: I currently am rocking some AIM 25:65 gears, M140(260%) spring, and this motor in a Version 3 gearbox - with an 11.1 Lipo battery. It pulls that spring like its nothing, and man it is FAST. I highly recommend this motor!!

The Bad: Nothing

The Ugly: Don't let it fool you - This thing really is for Torque AND Speed.

"I run this Motor in an M4 stubby killer with an M120 spring and short stroked gear set. I tested several other motors in the same gun including the ICS Turbo 3000, and the Systema high speed. The Lonex A1 Turbo/ High Speed motor was definitely the best motor, and has a relatively reasonable price tag. The A1 runs both quietly and cooly for prolonged bursts, and is This motor is rated for up to an M170 spring at a maximum of 40,000RPM. I would definitely recommend this to anyone running a high speed setup.

"I run his motor in all my guns that require short type. I use a m120 spring with 7.4 lipos. Best motor I've ever used hands down. As previously mentioned it does heat up a bit, but unless you are spraying a full hi cap it probably wouldn't be much of a problem. A no brainer upgrade part.

"Why are you still waiting throw evike the money and buy the motor.
Pros:
Pretty good efficiency
Enough torque to pull a truck
Extra 5-10 RPS with stock gears
Doesn't set your hand on fire
It's made by lonex

Cons:
Are you seriously expecting cons this is lonex were talking about ppl

"This motor is perfect. I cant say enough good things about it.

Pros: Stays cool
Nice looks.
Good packaging
Very high touque for great trigger response
Bumped up rof by around 6

Cons: lonex is too good to have cons....

"i run this with an 11.1 lipo with both m120s and m130s pull them easy. rate of fire is great, silent, never locked up. my only complaint is that it heats up more than id like it to but thats probably because of the 11.1 lipo.

"I just recently installed this in my echo 1 rec7 along with a new piston, piston head, air nozzle, and an m110 spring and the gun performs better than I could have possibly imagined. It chrono'd at 1200 rpm and 410 fps with a 1600mAh 9.6v battery. I haven't had an opportunity to chrono it with an 11.1v lipo. The only issue I had was the motor sucks a lot of power too much for the 9.6v to handle. The rof slowed down with continuous fire. (note I don't have a Mosfet installed. Echo 1 just hard wired the gun so that may be why)

Pros:
High rof: 1200 rpm with stock gears (shimmed) and m110 spring
Good torque for high speed motor (said on specs on box it can support up to an m140 spring)
Reasonably priced definitely worth the extra $10 than the matrix motors

Cons:
Motor sucks up a lot of juice, 11.1v lipo battery recommended

"I replaced my matrix magnum torque up motor with this one. I am running a m120 spring and 16:1 matrix gears. The matrix magnum motor had a ton of torque and slowed the rof way down and heated up way too much. This lonex motor works incredible for my set up, high rate of fire, easily pull m120 spring, and does not heat up at all. I will be putting this motor in future setups. Could not be happier with the performance compared to other motors in this price range.

"***UPDATE SINCE MY LAST REVIEW***
I've continued to mess with the motor, and I ended up taking it apart. Just to see if it would help I cleaned the entire motor with electrical cleaner (like break clean) and put it back together. It now works flawlessly and has for about 800 shots. It has a great ROF and it seems to be handling my setup fine now. I'm only giving it 4 stars because of the mishap, otherwise it's a five star product all the way.

"I have had this motor for a few months and I'm pretty impressed. I run it in my MP5 at 30 rps with an (M130?) that I have cut 4 coils off of to reduce the fps to 350 for CQB. I am also running an 11.1 45C LiPo battery (with MOSFET of course). The only problems that I have noticed is that the brushes that came with it are extremely soft and had to be replaced after a little while and it will heat up after a not to short but not too long amount of intense gameplay. But you could always vent the rather thick metal can to keep it running cool for a longer amount of time which is something that I have not yet done. Over all, I give it 4/5 instead of 5 because it has a few minor flaws that are easily corrected and may be a bit overpriced. But if you are smart enough to use one of evikes coupon codes while purchasing it than it is certainly worth your while!